[PATCH 51/87] drm/amd/display: put back front end initialization sequence

[sunpeng.li at amd.com]

From: Eric Yang <Eric.Yang2 at amd.com>

[Why]
Seamless boot optimization removed proper front end power off sequence.
In driver disable enable case, this causes driver to power gate hubp
and dpp while there is still memory fetching going on, this can cause
invalid memory requests to be generated which will hang data fabric.

[How]
Put back proper front end power off sequence

Signed-off-by: Eric Yang <Eric.Yang2 at amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo at amd.com>
Acked-by: Leo Li <sunpeng.li at amd.com>
Acked-by: Tony Cheng <Tony.Cheng at amd.com>
---
 .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 9f08bfb7f238..40a8198ce934 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1194,16 +1194,7 @@ static void dcn10_init_hw(struct dc *dc)
 	 * everything down.
 	 */
 	if (dcb->funcs->is_accelerated_mode(dcb) || dc->config.power_down_display_on_boot) {
-		for (i = 0; i < dc->res_pool->pipe_count; i++) {
-			struct hubp *hubp = dc->res_pool->hubps[i];
-			struct dpp *dpp = dc->res_pool->dpps[i];
-
-			hubp->funcs->hubp_init(hubp);
-			dc->res_pool->opps[i]->mpc_tree_params.opp_id = dc->res_pool->opps[i]->inst;
-			plane_atomic_power_down(dc, dpp, hubp);
-		}
-
-		apply_DEGVIDCN10_253_wa(dc);
+		dc->hwss.init_pipes(dc, dc->current_state);
 	}
 
 	for (i = 0; i < dc->res_pool->audio_count; i++) {
@@ -1374,10 +1365,6 @@ static bool dcn10_set_input_transfer_func(struct pipe_ctx *pipe_ctx,
 	return result;
 }
 
-
-
-
-
 static bool
 dcn10_set_output_transfer_func(struct pipe_ctx *pipe_ctx,
 			       const struct dc_stream_state *stream)
-- 
2.22.0