[PATCH 50/87] drm/amd/display: Set FEC_READY always before link training

[sunpeng.li at amd.com]

From: Nikola Cornij <nikola.cornij at amd.com>

[why]
Right now we FEC_READY is set only before the final link training,
i.e. at mode set time. This means FEC_READY won't be set when doing
link training as a response to HPD. It also fails UCD400 FEC test in
DP compliance.

[how]
Move FEC_READY setup to link training.

Signed-off-by: Nikola Cornij <nikola.cornij at amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo at amd.com>
Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe at amd.com>
Acked-by: Leo Li <sunpeng.li at amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c  | 14 +++++---------
 .../gpu/drm/amd/display/dc/core/dc_link_dp.c   | 18 +++++++++++++++---
 2 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 19483fbf321b..1422e74a5ffc 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1521,15 +1521,6 @@ static enum dc_status enable_link_dp(
 	if (link_settings.link_rate == LINK_RATE_LOW)
 			skip_video_pattern = false;
 
-#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
-	if (link->preferred_training_settings.fec_enable != NULL)
-		fec_enable = *link->preferred_training_settings.fec_enable;
-	else
-		fec_enable = true;
-
-	dp_set_fec_ready(link, fec_enable);
-#endif
-
 	if (link->aux_access_disabled) {
 		dc_link_dp_perform_link_training_skip_aux(link, &link_settings);
 
@@ -1547,6 +1538,11 @@ static enum dc_status enable_link_dp(
 		status = DC_FAIL_DP_LINK_TRAINING;
 
 #ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+	if (link->preferred_training_settings.fec_enable != NULL)
+		fec_enable = *link->preferred_training_settings.fec_enable;
+	else
+		fec_enable = true;
+
 	dp_set_fec_enable(link, fec_enable);
 #endif
 	return status;
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 4442e7b1e5b5..5c8e3318239c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1179,14 +1179,26 @@ enum link_training_result dc_link_dp_perform_link_training(
 	bool skip_video_pattern)
 {
 	enum link_training_result status = LINK_TRAINING_SUCCESS;
-
 	struct link_training_settings lt_settings;
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+	bool fec_enable;
+#endif
 
 	initialize_training_settings(link, link_setting, &lt_settings);
 
 	/* 1. set link rate, lane count and spread. */
 	dpcd_set_link_settings(link, &lt_settings);
 
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+	if (link->preferred_training_settings.fec_enable != NULL)
+		fec_enable = *link->preferred_training_settings.fec_enable;
+	else
+		fec_enable = true;
+
+	dp_set_fec_ready(link, fec_enable);
+#endif
+
+
 	/* 2. perform link training (set link training done
 	 *  to false is done as well)
 	 */
@@ -3153,7 +3165,7 @@ void dp_set_fec_ready(struct dc_link *link, bool ready)
 
 	if (link_enc->funcs->fec_set_ready &&
 			link->dpcd_caps.fec_cap.bits.FEC_CAPABLE) {
-		if (link->fec_state == dc_link_fec_not_ready && ready) {
+		if (ready) {
 			fec_config = 1;
 			if (core_link_write_dpcd(link,
 					DP_FEC_CONFIGURATION,
@@ -3164,7 +3176,7 @@ void dp_set_fec_ready(struct dc_link *link, bool ready)
 			} else {
 				dm_error("dpcd write failed to set fec_ready");
 			}
-		} else if (link->fec_state == dc_link_fec_ready && !ready) {
+		} else if (link->fec_state == dc_link_fec_ready) {
 			fec_config = 0;
 			core_link_write_dpcd(link,
 					DP_FEC_CONFIGURATION,
-- 
2.22.0