AMD DC graphics display code enables -mhard-float, -msse, -msse2 without any visible FPU state protection
Peter Zijlstra
peterz at infradead.org
Thu Apr 2 14:13:08 UTC 2020
On Thu, Apr 02, 2020 at 09:33:54AM +0200, Christian König wrote:
> Hi Jann,
>
> Am 02.04.20 um 04:34 schrieb Jann Horn:
> > [x86 folks in CC so that they can chime in on the precise rules for this stuff]
> >
> > Hi!
> >
> > I noticed that several makefiles under drivers/gpu/drm/amd/display/dc/
> > turn on floating-point instructions in the compiler flags
> > (-mhard-float, -msse and -msse2) in order to make the "float" and
> > "double" types usable from C code without requiring helper functions.
> >
> > However, as far as I know, code running in normal kernel context isn't
> > allowed to use floating-point registers without special protection
> > using helpers like kernel_fpu_begin() and kernel_fpu_end() (which also
> > require that the protected code never blocks). If you violate that
> > rule, that can lead to various issues - among other things, I think
> > the kernel will clobber userspace FPU register state, and I think the
> > kernel code can blow up if a context switch happens at the wrong time,
> > since in-kernel task switches don't preserve FPU state.
> >
> > Is there some hidden trick I'm missing that makes it okay to use FPU
> > registers here?
> >
> > I would try testing this, but unfortunately none of the AMD devices I
> > have here have the appropriate graphics hardware...
>
> yes, using the floating point calculations in the display code has been a
> source of numerous problems and confusion in the past.
>
> The calls to kernel_fpu_begin() and kernel_fpu_end() are hidden behind the
> DC_FP_START() and DC_FP_END() macros which are supposed to hide the
> architecture depend handling for x86 and PPC64.
>
> This originated from the graphics block integrated into AMD CPU (where we
> knew which fp unit we had), but as far as I know is now also used for
> dedicated AMD GPUs as well.
>
> I'm not really a fan of this either, but so far we weren't able to convince
> the hardware engineers to not use floating point calculations for the
> display stuff.
Might I complain that:
make O=allmodconfig-build drivers/gpu/drm/amd/display/dc/
does not in fact work?
Anyway, how do people feel about something like the below?
Masami, Boris, is there any semi-sane way we can have insn_is_fpu() ?
While digging through various opcode manuals is of course forever fun, I
do feel like it might not be the best way.
---
arch/x86/include/asm/fpu/api.h | 7 ++++
arch/x86/include/asm/fpu/internal.h | 11 ++++++
arch/x86/kernel/fpu/init.c | 5 +++
tools/objtool/arch.h | 1 +
tools/objtool/arch/x86/decode.c | 71 ++++++++++++++++++++++++++-----------
tools/objtool/check.c | 58 ++++++++++++++++++++++++++++++
tools/objtool/check.h | 3 +-
7 files changed, 134 insertions(+), 22 deletions(-)
diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h
index b774c52e5411..b9bca1cdc875 100644
--- a/arch/x86/include/asm/fpu/api.h
+++ b/arch/x86/include/asm/fpu/api.h
@@ -12,6 +12,13 @@
#define _ASM_X86_FPU_API_H
#include <linux/bottom_half.h>
+#define annotate_fpu() ({ \
+ asm volatile("%c0:\n\t" \
+ ".pushsection .discard.fpu_safe\n\t" \
+ ".long %c0b - .\n\t" \
+ ".popsection\n\t" : : "i" (__COUNTER__)); \
+})
+
/*
* Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It
* disables preemption so be careful if you intend to use it for long periods
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 44c48e34d799..bc436213a0d4 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -102,6 +102,11 @@ static inline void fpstate_init_fxstate(struct fxregs_state *fx)
}
extern void fpstate_sanitize_xstate(struct fpu *fpu);
+#define _ASM_ANNOTATE_FPU(at) \
+ ".pushsection .discard.fpu_safe\n" \
+ ".long " #at " - .\n" \
+ ".popsection\n" \
+
#define user_insn(insn, output, input...) \
({ \
int err; \
@@ -116,6 +121,7 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
" jmp 2b\n" \
".previous\n" \
_ASM_EXTABLE(1b, 3b) \
+ _ASM_ANNOTATE_FPU(1b) \
: [err] "=r" (err), output \
: "0"(0), input); \
err; \
@@ -131,6 +137,7 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
" jmp 2b\n" \
".previous\n" \
_ASM_EXTABLE(1b, 3b) \
+ _ASM_ANNOTATE_FPU(1b) \
: [err] "=r" (err), output \
: "0"(0), input); \
err; \
@@ -140,6 +147,7 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
asm volatile("1:" #insn "\n\t" \
"2:\n" \
_ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_fprestore) \
+ _ASM_ANNOTATE_FPU(1b) \
: output : input)
static inline int copy_fregs_to_user(struct fregs_state __user *fx)
@@ -197,6 +205,7 @@ static inline int copy_user_to_fregs(struct fregs_state __user *fx)
static inline void copy_fxregs_to_kernel(struct fpu *fpu)
{
+ annotate_fpu();
if (IS_ENABLED(CONFIG_X86_32))
asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state.fxsave));
else
@@ -437,6 +446,7 @@ static inline int copy_fpregs_to_fpstate(struct fpu *fpu)
* Legacy FPU register saving, FNSAVE always clears FPU registers,
* so we have to mark them inactive:
*/
+ annotate_fpu();
asm volatile("fnsave %[fp]; fwait" : [fp] "=m" (fpu->state.fsave));
return 0;
@@ -462,6 +472,7 @@ static inline void copy_kernel_to_fpregs(union fpregs_state *fpstate)
* "m" is a random variable that should be in L1.
*/
if (unlikely(static_cpu_has_bug(X86_BUG_FXSAVE_LEAK))) {
+ annotate_fpu();
asm volatile(
"fnclex\n\t"
"emms\n\t"
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 6ce7e0a23268..ca7890bd197c 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -38,7 +38,10 @@ static void fpu__init_cpu_generic(void)
fpstate_init_soft(¤t->thread.fpu.state.soft);
else
#endif
+ {
+ annotate_fpu();
asm volatile ("fninit");
+ }
}
/*
@@ -61,6 +64,7 @@ static bool fpu__probe_without_cpuid(void)
cr0 &= ~(X86_CR0_TS | X86_CR0_EM);
write_cr0(cr0);
+ annotate_fpu();
asm volatile("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw));
pr_info("x86/fpu: Probing for FPU: FSW=0x%04hx FCW=0x%04hx\n", fsw, fcw);
@@ -101,6 +105,7 @@ static void __init fpu__init_system_mxcsr(void)
/* Static because GCC does not get 16-byte stack alignment right: */
static struct fxregs_state fxregs __initdata;
+ annotate_fpu();
asm volatile("fxsave %0" : "+m" (fxregs));
mask = fxregs.mxcsr_mask;
diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h
index ced3765c4f44..e748ddc92958 100644
--- a/tools/objtool/arch.h
+++ b/tools/objtool/arch.h
@@ -27,6 +27,7 @@ enum insn_type {
INSN_CLAC,
INSN_STD,
INSN_CLD,
+ INSN_FPU,
INSN_OTHER,
};
diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c
index a62e032863a8..7be6e1384efb 100644
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -92,8 +92,10 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
*len = insn.length;
*type = INSN_OTHER;
- if (insn.vex_prefix.nbytes)
+ if (insn.vex_prefix.nbytes) {
+ *type = INSN_FPU;
return 0;
+ }
op1 = insn.opcode.bytes[0];
op2 = insn.opcode.bytes[1];
@@ -357,48 +359,71 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
case 0x0f:
- if (op2 == 0x01) {
-
+ switch (op2) {
+ case 0x01:
if (modrm == 0xca)
*type = INSN_CLAC;
else if (modrm == 0xcb)
*type = INSN_STAC;
+ break;
- } else if (op2 >= 0x80 && op2 <= 0x8f) {
-
+ case 0x80 ... 0x8f: /* Jcc */
*type = INSN_JUMP_CONDITIONAL;
+ break;
- } else if (op2 == 0x05 || op2 == 0x07 || op2 == 0x34 ||
- op2 == 0x35) {
-
- /* sysenter, sysret */
+ case 0x05: /* syscall */
+ case 0x07: /* sysret */
+ case 0x34: /* sysenter */
+ case 0x35: /* sysexit */
*type = INSN_CONTEXT_SWITCH;
+ break;
- } else if (op2 == 0x0b || op2 == 0xb9) {
-
- /* ud2 */
+ case 0x0b: /* ud2 */
+ case 0xb9: /* ud1 */
*type = INSN_BUG;
+ break;
- } else if (op2 == 0x0d || op2 == 0x1f) {
-
+ case 0x0d:
+ case 0x1f:
/* nopl/nopw */
*type = INSN_NOP;
+ break;
- } else if (op2 == 0xa0 || op2 == 0xa8) {
-
- /* push fs/gs */
+ case 0xa0: /* push fs */
+ case 0xa8: /* push gs */
*type = INSN_STACK;
op->src.type = OP_SRC_CONST;
op->dest.type = OP_DEST_PUSH;
+ break;
- } else if (op2 == 0xa1 || op2 == 0xa9) {
-
- /* pop fs/gs */
+ case 0xa1: /* pop fs */
+ case 0xa9: /* pop gs */
*type = INSN_STACK;
op->src.type = OP_SRC_POP;
op->dest.type = OP_DEST_MEM;
- }
+ break;
+
+ case 0xae:
+ /* insane!! */
+ if ((modrm_reg >= 0 && modrm_reg <= 3) && modrm_mod != 3 && !insn.prefixes.nbytes)
+ *type = INSN_FPU;
+ break;
+ case 0x10 ... 0x17:
+ case 0x28 ... 0x2f:
+ case 0x3a:
+ case 0x50 ... 0x77:
+ case 0x7a ... 0x7f:
+ case 0xc2:
+ case 0xc4 ... 0xc6:
+ case 0xd0 ... 0xff:
+ /* MMX, SSE, VMX */
+ *type = INSN_FPU;
+ break;
+
+ default:
+ break;
+ }
break;
case 0xc9:
@@ -414,6 +439,10 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
break;
+ case 0xd8 ... 0xdf: /* x87 FPU range */
+ *type = INSN_FPU;
+ break;
+
case 0xe3:
/* jecxz/jrcxz */
*type = INSN_JUMP_CONDITIONAL;
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index e3bb76358148..af6be584f6a5 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1316,6 +1316,43 @@ static int read_unwind_hints(struct objtool_file *file)
return 0;
}
+static int read_fpu_hints(struct objtool_file *file)
+{
+ struct section *sec;
+ struct instruction *insn;
+ struct rela *rela;
+
+ sec = find_section_by_name(file->elf, ".rela.discard.fpu_safe");
+ if (!sec)
+ return 0;
+
+ list_for_each_entry(rela, &sec->rela_list, list) {
+ if (rela->sym->type != STT_SECTION) {
+ WARN("unexpected relocation symbol type in %s", sec->name);
+ return -1;
+ }
+
+ insn = find_insn(file, rela->sym->sec, rela->addend);
+ if (!insn) {
+ WARN("bad .discard.fpu_safe entry");
+ return -1;
+ }
+
+ if (insn->type != INSN_FPU) {
+ WARN_FUNC("fpu_safe hint not an FPU instruction",
+ insn->sec, insn->offset);
+// return -1;
+ }
+
+ while (insn && insn->type == INSN_FPU) {
+ insn->fpu_safe = true;
+ insn = next_insn_same_func(file, insn);
+ }
+ }
+
+ return 0;
+}
+
static int read_retpoline_hints(struct objtool_file *file)
{
struct section *sec;
@@ -1422,6 +1459,10 @@ static int decode_sections(struct objtool_file *file)
if (ret)
return ret;
+ ret = read_fpu_hints(file);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -2167,6 +2208,16 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
if (dead_end_function(file, insn->call_dest))
return 0;
+ if (insn->call_dest) {
+ if (!strcmp(insn->call_dest->name, "kernel_fpu_begin") ||
+ !strcmp(insn->call_dest->name, "emulator_get_fpu"))
+ state.fpu = true;
+
+ if (!strcmp(insn->call_dest->name, "kernel_fpu_end") ||
+ !strcmp(insn->call_dest->name, "emulator_put_fpu"))
+ state.fpu = false;
+ }
+
break;
case INSN_JUMP_CONDITIONAL:
@@ -2275,6 +2326,13 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
state.df = false;
break;
+ case INSN_FPU:
+ if (!state.fpu && !insn->fpu_safe) {
+ WARN_FUNC("FPU instruction outside of kernel_fpu_{begin,end}()", sec, insn->offset);
+ return 1;
+ }
+ break;
+
default:
break;
}
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index f0ce8ffe7135..89c22bcdc64f 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -20,6 +20,7 @@ struct insn_state {
unsigned char type;
bool bp_scratch;
bool drap, end, uaccess, df;
+ bool fpu;
unsigned int uaccess_stack;
int drap_reg, drap_offset;
struct cfi_reg vals[CFI_NUM_REGS];
@@ -34,7 +35,7 @@ struct instruction {
enum insn_type type;
unsigned long immediate;
bool alt_group, dead_end, ignore, hint, save, restore, ignore_alts;
- bool retpoline_safe;
+ bool retpoline_safe, fpu_safe;
u8 visited;
struct symbol *call_dest;
struct instruction *jump_dest;
More information about the amd-gfx
mailing list