AMD DC graphics display code enables -mhard-float, -msse, -msse2 without any visible FPU state protection
Masami Hiramatsu
mhiramat at kernel.org
Fri Apr 3 05:28:37 UTC 2020
On Thu, 2 Apr 2020 16:13:08 +0200
Peter Zijlstra <peterz at infradead.org> wrote:
> On Thu, Apr 02, 2020 at 09:33:54AM +0200, Christian König wrote:
> > Hi Jann,
> >
> > Am 02.04.20 um 04:34 schrieb Jann Horn:
> > > [x86 folks in CC so that they can chime in on the precise rules for this stuff]
> > >
> > > Hi!
> > >
> > > I noticed that several makefiles under drivers/gpu/drm/amd/display/dc/
> > > turn on floating-point instructions in the compiler flags
> > > (-mhard-float, -msse and -msse2) in order to make the "float" and
> > > "double" types usable from C code without requiring helper functions.
> > >
> > > However, as far as I know, code running in normal kernel context isn't
> > > allowed to use floating-point registers without special protection
> > > using helpers like kernel_fpu_begin() and kernel_fpu_end() (which also
> > > require that the protected code never blocks). If you violate that
> > > rule, that can lead to various issues - among other things, I think
> > > the kernel will clobber userspace FPU register state, and I think the
> > > kernel code can blow up if a context switch happens at the wrong time,
> > > since in-kernel task switches don't preserve FPU state.
> > >
> > > Is there some hidden trick I'm missing that makes it okay to use FPU
> > > registers here?
> > >
> > > I would try testing this, but unfortunately none of the AMD devices I
> > > have here have the appropriate graphics hardware...
> >
> > yes, using the floating point calculations in the display code has been a
> > source of numerous problems and confusion in the past.
> >
> > The calls to kernel_fpu_begin() and kernel_fpu_end() are hidden behind the
> > DC_FP_START() and DC_FP_END() macros which are supposed to hide the
> > architecture depend handling for x86 and PPC64.
> >
> > This originated from the graphics block integrated into AMD CPU (where we
> > knew which fp unit we had), but as far as I know is now also used for
> > dedicated AMD GPUs as well.
> >
> > I'm not really a fan of this either, but so far we weren't able to convince
> > the hardware engineers to not use floating point calculations for the
> > display stuff.
>
> Might I complain that:
>
> make O=allmodconfig-build drivers/gpu/drm/amd/display/dc/
>
> does not in fact work?
>
> Anyway, how do people feel about something like the below?
>
> Masami, Boris, is there any semi-sane way we can have insn_is_fpu() ?
> While digging through various opcode manuals is of course forever fun, I
> do feel like it might not be the best way.
Yes, it is possible to add INAT_FPU and insn_is_fpu().
But it seems that the below patch needs more classification based on
nmemonic or opcodes.
IMHO, it is the time to expand gen-insn-attr.awk or clone it to
generate another opcode map, so that user will easily extend the
insn infrastructure.
(e.g. I had made an in-kernel disassembler, which generates a mnemonic
maps from x86-opcode-map.txt)
https://github.com/mhiramat/linux/commits/inkernel-disasm-20130414
Thank you,
>
> ---
> arch/x86/include/asm/fpu/api.h | 7 ++++
> arch/x86/include/asm/fpu/internal.h | 11 ++++++
> arch/x86/kernel/fpu/init.c | 5 +++
> tools/objtool/arch.h | 1 +
> tools/objtool/arch/x86/decode.c | 71 ++++++++++++++++++++++++++-----------
> tools/objtool/check.c | 58 ++++++++++++++++++++++++++++++
> tools/objtool/check.h | 3 +-
> 7 files changed, 134 insertions(+), 22 deletions(-)
>
> diff --git a/arch/x86/include/asm/fpu/api.h b/arch/x86/include/asm/fpu/api.h
> index b774c52e5411..b9bca1cdc875 100644
> --- a/arch/x86/include/asm/fpu/api.h
> +++ b/arch/x86/include/asm/fpu/api.h
> @@ -12,6 +12,13 @@
> #define _ASM_X86_FPU_API_H
> #include <linux/bottom_half.h>
>
> +#define annotate_fpu() ({ \
> + asm volatile("%c0:\n\t" \
> + ".pushsection .discard.fpu_safe\n\t" \
> + ".long %c0b - .\n\t" \
> + ".popsection\n\t" : : "i" (__COUNTER__)); \
> +})
> +
> /*
> * Use kernel_fpu_begin/end() if you intend to use FPU in kernel context. It
> * disables preemption so be careful if you intend to use it for long periods
> diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
> index 44c48e34d799..bc436213a0d4 100644
> --- a/arch/x86/include/asm/fpu/internal.h
> +++ b/arch/x86/include/asm/fpu/internal.h
> @@ -102,6 +102,11 @@ static inline void fpstate_init_fxstate(struct fxregs_state *fx)
> }
> extern void fpstate_sanitize_xstate(struct fpu *fpu);
>
> +#define _ASM_ANNOTATE_FPU(at) \
> + ".pushsection .discard.fpu_safe\n" \
> + ".long " #at " - .\n" \
> + ".popsection\n" \
> +
> #define user_insn(insn, output, input...) \
> ({ \
> int err; \
> @@ -116,6 +121,7 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
> " jmp 2b\n" \
> ".previous\n" \
> _ASM_EXTABLE(1b, 3b) \
> + _ASM_ANNOTATE_FPU(1b) \
> : [err] "=r" (err), output \
> : "0"(0), input); \
> err; \
> @@ -131,6 +137,7 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
> " jmp 2b\n" \
> ".previous\n" \
> _ASM_EXTABLE(1b, 3b) \
> + _ASM_ANNOTATE_FPU(1b) \
> : [err] "=r" (err), output \
> : "0"(0), input); \
> err; \
> @@ -140,6 +147,7 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
> asm volatile("1:" #insn "\n\t" \
> "2:\n" \
> _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_fprestore) \
> + _ASM_ANNOTATE_FPU(1b) \
> : output : input)
>
> static inline int copy_fregs_to_user(struct fregs_state __user *fx)
> @@ -197,6 +205,7 @@ static inline int copy_user_to_fregs(struct fregs_state __user *fx)
>
> static inline void copy_fxregs_to_kernel(struct fpu *fpu)
> {
> + annotate_fpu();
> if (IS_ENABLED(CONFIG_X86_32))
> asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state.fxsave));
> else
> @@ -437,6 +446,7 @@ static inline int copy_fpregs_to_fpstate(struct fpu *fpu)
> * Legacy FPU register saving, FNSAVE always clears FPU registers,
> * so we have to mark them inactive:
> */
> + annotate_fpu();
> asm volatile("fnsave %[fp]; fwait" : [fp] "=m" (fpu->state.fsave));
>
> return 0;
> @@ -462,6 +472,7 @@ static inline void copy_kernel_to_fpregs(union fpregs_state *fpstate)
> * "m" is a random variable that should be in L1.
> */
> if (unlikely(static_cpu_has_bug(X86_BUG_FXSAVE_LEAK))) {
> + annotate_fpu();
> asm volatile(
> "fnclex\n\t"
> "emms\n\t"
> diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
> index 6ce7e0a23268..ca7890bd197c 100644
> --- a/arch/x86/kernel/fpu/init.c
> +++ b/arch/x86/kernel/fpu/init.c
> @@ -38,7 +38,10 @@ static void fpu__init_cpu_generic(void)
> fpstate_init_soft(¤t->thread.fpu.state.soft);
> else
> #endif
> + {
> + annotate_fpu();
> asm volatile ("fninit");
> + }
> }
>
> /*
> @@ -61,6 +64,7 @@ static bool fpu__probe_without_cpuid(void)
> cr0 &= ~(X86_CR0_TS | X86_CR0_EM);
> write_cr0(cr0);
>
> + annotate_fpu();
> asm volatile("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw));
>
> pr_info("x86/fpu: Probing for FPU: FSW=0x%04hx FCW=0x%04hx\n", fsw, fcw);
> @@ -101,6 +105,7 @@ static void __init fpu__init_system_mxcsr(void)
> /* Static because GCC does not get 16-byte stack alignment right: */
> static struct fxregs_state fxregs __initdata;
>
> + annotate_fpu();
> asm volatile("fxsave %0" : "+m" (fxregs));
>
> mask = fxregs.mxcsr_mask;
> diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h
> index ced3765c4f44..e748ddc92958 100644
> --- a/tools/objtool/arch.h
> +++ b/tools/objtool/arch.h
> @@ -27,6 +27,7 @@ enum insn_type {
> INSN_CLAC,
> INSN_STD,
> INSN_CLD,
> + INSN_FPU,
> INSN_OTHER,
> };
>
> diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c
> index a62e032863a8..7be6e1384efb 100644
> --- a/tools/objtool/arch/x86/decode.c
> +++ b/tools/objtool/arch/x86/decode.c
> @@ -92,8 +92,10 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
> *len = insn.length;
> *type = INSN_OTHER;
>
> - if (insn.vex_prefix.nbytes)
> + if (insn.vex_prefix.nbytes) {
> + *type = INSN_FPU;
> return 0;
> + }
>
> op1 = insn.opcode.bytes[0];
> op2 = insn.opcode.bytes[1];
> @@ -357,48 +359,71 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
>
> case 0x0f:
>
> - if (op2 == 0x01) {
> -
> + switch (op2) {
> + case 0x01:
> if (modrm == 0xca)
> *type = INSN_CLAC;
> else if (modrm == 0xcb)
> *type = INSN_STAC;
> + break;
>
> - } else if (op2 >= 0x80 && op2 <= 0x8f) {
> -
> + case 0x80 ... 0x8f: /* Jcc */
> *type = INSN_JUMP_CONDITIONAL;
> + break;
>
> - } else if (op2 == 0x05 || op2 == 0x07 || op2 == 0x34 ||
> - op2 == 0x35) {
> -
> - /* sysenter, sysret */
> + case 0x05: /* syscall */
> + case 0x07: /* sysret */
> + case 0x34: /* sysenter */
> + case 0x35: /* sysexit */
> *type = INSN_CONTEXT_SWITCH;
> + break;
>
> - } else if (op2 == 0x0b || op2 == 0xb9) {
> -
> - /* ud2 */
> + case 0x0b: /* ud2 */
> + case 0xb9: /* ud1 */
> *type = INSN_BUG;
> + break;
>
> - } else if (op2 == 0x0d || op2 == 0x1f) {
> -
> + case 0x0d:
> + case 0x1f:
> /* nopl/nopw */
> *type = INSN_NOP;
> + break;
>
> - } else if (op2 == 0xa0 || op2 == 0xa8) {
> -
> - /* push fs/gs */
> + case 0xa0: /* push fs */
> + case 0xa8: /* push gs */
> *type = INSN_STACK;
> op->src.type = OP_SRC_CONST;
> op->dest.type = OP_DEST_PUSH;
> + break;
>
> - } else if (op2 == 0xa1 || op2 == 0xa9) {
> -
> - /* pop fs/gs */
> + case 0xa1: /* pop fs */
> + case 0xa9: /* pop gs */
> *type = INSN_STACK;
> op->src.type = OP_SRC_POP;
> op->dest.type = OP_DEST_MEM;
> - }
> + break;
> +
> + case 0xae:
> + /* insane!! */
> + if ((modrm_reg >= 0 && modrm_reg <= 3) && modrm_mod != 3 && !insn.prefixes.nbytes)
> + *type = INSN_FPU;
> + break;
>
> + case 0x10 ... 0x17:
> + case 0x28 ... 0x2f:
> + case 0x3a:
> + case 0x50 ... 0x77:
> + case 0x7a ... 0x7f:
> + case 0xc2:
> + case 0xc4 ... 0xc6:
> + case 0xd0 ... 0xff:
> + /* MMX, SSE, VMX */
> + *type = INSN_FPU;
> + break;
> +
> + default:
> + break;
> + }
> break;
>
> case 0xc9:
> @@ -414,6 +439,10 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
>
> break;
>
> + case 0xd8 ... 0xdf: /* x87 FPU range */
> + *type = INSN_FPU;
> + break;
> +
> case 0xe3:
> /* jecxz/jrcxz */
> *type = INSN_JUMP_CONDITIONAL;
> diff --git a/tools/objtool/check.c b/tools/objtool/check.c
> index e3bb76358148..af6be584f6a5 100644
> --- a/tools/objtool/check.c
> +++ b/tools/objtool/check.c
> @@ -1316,6 +1316,43 @@ static int read_unwind_hints(struct objtool_file *file)
> return 0;
> }
>
> +static int read_fpu_hints(struct objtool_file *file)
> +{
> + struct section *sec;
> + struct instruction *insn;
> + struct rela *rela;
> +
> + sec = find_section_by_name(file->elf, ".rela.discard.fpu_safe");
> + if (!sec)
> + return 0;
> +
> + list_for_each_entry(rela, &sec->rela_list, list) {
> + if (rela->sym->type != STT_SECTION) {
> + WARN("unexpected relocation symbol type in %s", sec->name);
> + return -1;
> + }
> +
> + insn = find_insn(file, rela->sym->sec, rela->addend);
> + if (!insn) {
> + WARN("bad .discard.fpu_safe entry");
> + return -1;
> + }
> +
> + if (insn->type != INSN_FPU) {
> + WARN_FUNC("fpu_safe hint not an FPU instruction",
> + insn->sec, insn->offset);
> +// return -1;
> + }
> +
> + while (insn && insn->type == INSN_FPU) {
> + insn->fpu_safe = true;
> + insn = next_insn_same_func(file, insn);
> + }
> + }
> +
> + return 0;
> +}
> +
> static int read_retpoline_hints(struct objtool_file *file)
> {
> struct section *sec;
> @@ -1422,6 +1459,10 @@ static int decode_sections(struct objtool_file *file)
> if (ret)
> return ret;
>
> + ret = read_fpu_hints(file);
> + if (ret)
> + return ret;
> +
> return 0;
> }
>
> @@ -2167,6 +2208,16 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
> if (dead_end_function(file, insn->call_dest))
> return 0;
>
> + if (insn->call_dest) {
> + if (!strcmp(insn->call_dest->name, "kernel_fpu_begin") ||
> + !strcmp(insn->call_dest->name, "emulator_get_fpu"))
> + state.fpu = true;
> +
> + if (!strcmp(insn->call_dest->name, "kernel_fpu_end") ||
> + !strcmp(insn->call_dest->name, "emulator_put_fpu"))
> + state.fpu = false;
> + }
> +
> break;
>
> case INSN_JUMP_CONDITIONAL:
> @@ -2275,6 +2326,13 @@ static int validate_branch(struct objtool_file *file, struct symbol *func,
> state.df = false;
> break;
>
> + case INSN_FPU:
> + if (!state.fpu && !insn->fpu_safe) {
> + WARN_FUNC("FPU instruction outside of kernel_fpu_{begin,end}()", sec, insn->offset);
> + return 1;
> + }
> + break;
> +
> default:
> break;
> }
> diff --git a/tools/objtool/check.h b/tools/objtool/check.h
> index f0ce8ffe7135..89c22bcdc64f 100644
> --- a/tools/objtool/check.h
> +++ b/tools/objtool/check.h
> @@ -20,6 +20,7 @@ struct insn_state {
> unsigned char type;
> bool bp_scratch;
> bool drap, end, uaccess, df;
> + bool fpu;
> unsigned int uaccess_stack;
> int drap_reg, drap_offset;
> struct cfi_reg vals[CFI_NUM_REGS];
> @@ -34,7 +35,7 @@ struct instruction {
> enum insn_type type;
> unsigned long immediate;
> bool alt_group, dead_end, ignore, hint, save, restore, ignore_alts;
> - bool retpoline_safe;
> + bool retpoline_safe, fpu_safe;
> u8 visited;
> struct symbol *call_dest;
> struct instruction *jump_dest;
--
Masami Hiramatsu <mhiramat at kernel.org>
More information about the amd-gfx
mailing list