[PATCH] drm/amd/display: Use orientated source size when checking cursor scaling

[Vlad Zahorodnii]

dm_check_crtc_cursor() doesn't take into account plane transforms when
calculating plane scaling, this can result in false positives.

For example, if there's an output with resolution 3840x2160 and the
output is rotated 90 degrees, CRTC_W and CRTC_H will be 3840 and 2160,
respectively, but SRC_W and SRC_H will be 2160 and 3840, respectively.

Since the cursor plane usually has a square buffer attached to it, the
dm_check_crtc_cursor() will think that there's a scale factor mismatch
even though there isn't really.

This fixes an issue where kwin fails to use hardware plane transforms.

Signed-off-by: Vlad Zahorodnii <vlad.zahorodnii at kde.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 35 ++++++++++++++-----
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a3c0f2e4f4c1..27e5a26ae67c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -10736,6 +10736,24 @@ static int dm_update_plane_state(struct dc *dc,
 	return ret;
 }
 
+static void dm_get_orientated_plane_size(struct drm_plane_state *plane_state,
+					 int *src_w, int *src_h)
+{
+	switch (plane_state->rotation & DRM_MODE_ROTATE_MASK) {
+	case DRM_MODE_ROTATE_90:
+	case DRM_MODE_ROTATE_270:
+		*src_w = plane_state->src_h >> 16;
+		*src_h = plane_state->src_w >> 16;
+		break;
+	case DRM_MODE_ROTATE_0:
+	case DRM_MODE_ROTATE_180:
+	default:
+		*src_w = plane_state->src_w >> 16;
+		*src_h = plane_state->src_h >> 16;
+		break;
+	}
+}
+
 static int dm_check_crtc_cursor(struct drm_atomic_state *state,
 				struct drm_crtc *crtc,
 				struct drm_crtc_state *new_crtc_state)
@@ -10744,6 +10762,8 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state,
 	struct drm_plane_state *new_cursor_state, *new_underlying_state;
 	int i;
 	int cursor_scale_w, cursor_scale_h, underlying_scale_w, underlying_scale_h;
+	int cursor_src_w, cursor_src_h;
+	int underlying_src_w, underlying_src_h;
 
 	/* On DCE and DCN there is no dedicated hardware cursor plane. We get a
 	 * cursor per pipe but it's going to inherit the scaling and
@@ -10755,10 +10775,9 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state,
 		return 0;
 	}
 
-	cursor_scale_w = new_cursor_state->crtc_w * 1000 /
-			 (new_cursor_state->src_w >> 16);
-	cursor_scale_h = new_cursor_state->crtc_h * 1000 /
-			 (new_cursor_state->src_h >> 16);
+	dm_get_orientated_plane_size(new_cursor_state, &cursor_src_w, &cursor_src_h);
+	cursor_scale_w = new_cursor_state->crtc_w * 1000 / cursor_src_w;
+	cursor_scale_h = new_cursor_state->crtc_h * 1000 / cursor_src_h;
 
 	for_each_new_plane_in_state_reverse(state, underlying, new_underlying_state, i) {
 		/* Narrow down to non-cursor planes on the same CRTC as the cursor */
@@ -10769,10 +10788,10 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state,
 		if (!new_underlying_state->fb)
 			continue;
 
-		underlying_scale_w = new_underlying_state->crtc_w * 1000 /
-				     (new_underlying_state->src_w >> 16);
-		underlying_scale_h = new_underlying_state->crtc_h * 1000 /
-				     (new_underlying_state->src_h >> 16);
+		dm_get_orientated_plane_size(new_underlying_state,
+					     &underlying_src_w, &underlying_src_h);
+		underlying_scale_w = new_underlying_state->crtc_w * 1000 / underlying_src_w;
+		underlying_scale_h = new_underlying_state->crtc_h * 1000 / underlying_src_h;
 
 		if (cursor_scale_w != underlying_scale_w ||
 		    cursor_scale_h != underlying_scale_h) {
-- 
2.34.1