[PATCH] drm/amd/display: Add feature flags to disable LTTPR

[Aurabindo Pillai]

[Why]
Allow for disabling non transparent mode of LTTPR for running tests.

[How]
Add a feature flag and set them during init sequence. The flags are
already being used in DC.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai at amd.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++
 drivers/gpu/drm/amd/include/amd_shared.h          | 4 ++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index d25e5be77dea..9433b9a660e2 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1453,6 +1453,13 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 	if (amdgpu_dc_feature_mask & DC_EDP_NO_POWER_SEQUENCING)
 		init_data.flags.edp_no_power_sequencing = true;
 
+#ifdef CONFIG_DRM_AMD_DC_DCN
+	if (amdgpu_dc_feature_mask & DC_DISABLE_LTTPR_DP1_4A)
+		init_data.flags.allow_lttpr_non_transparent_mode.bits.DP1_4A = true;
+	if (amdgpu_dc_feature_mask & DC_DISABLE_LTTPR_DP2_0)
+		init_data.flags.allow_lttpr_non_transparent_mode.bits.DP2_0 = true;
+#endif
+
 	init_data.flags.power_down_display_on_boot = true;
 
 	if (check_seamless_boot_capability(adev)) {
diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h
index 4b9e68a79f06..3c72208b4754 100644
--- a/drivers/gpu/drm/amd/include/amd_shared.h
+++ b/drivers/gpu/drm/amd/include/amd_shared.h
@@ -231,6 +231,10 @@ enum DC_FEATURE_MASK {
 	DC_DISABLE_FRACTIONAL_PWM_MASK = (1 << 2), //0x4, disabled by default
 	DC_PSR_MASK = (1 << 3), //0x8, disabled by default for dcn < 3.1
 	DC_EDP_NO_POWER_SEQUENCING = (1 << 4), //0x10, disabled by default
+#ifdef CONFIG_DRM_AMD_DC_DCN
+	DC_DISABLE_LTTPR_DP1_4A = (1 << 5), //0x20, disabled by default
+	DC_DISABLE_LTTPR_DP2_0 = (1 << 6), //0x40, disabled by default
+#endif
 };
 
 enum DC_DEBUG_MASK {
-- 
2.30.2