[PATCH 1/1] drm/amdgpu: Read clock counter via MMIO to reduce delay (v4)

[YuBiao Wang]

[Why]
GPU timing counters are read via KIQ under sriov, which will introduce
a delay.

[How]
It could be directly read by MMIO.

v2: Add additional check to prevent carryover issue.
v3: Only check for carryover for once to prevent performance issue.
v4: Add comments of the rough frequency where carryover happens.

Signed-off-by: YuBiao Wang <YuBiao.Wang at amd.com>
Acked-by: Horace Chen <horace.chen at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index ff7e9f49040e..9355494002a1 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -7609,7 +7609,7 @@ static int gfx_v10_0_soft_reset(void *handle)
 
 static uint64_t gfx_v10_0_get_gpu_clock_counter(struct amdgpu_device *adev)
 {
-	uint64_t clock;
+	uint64_t clock, clock_lo, clock_hi, hi_check;
 
 	amdgpu_gfx_off_ctrl(adev, false);
 	mutex_lock(&adev->gfx.gpu_clock_mutex);
@@ -7620,8 +7620,15 @@ static uint64_t gfx_v10_0_get_gpu_clock_counter(struct amdgpu_device *adev)
 			((uint64_t)RREG32_SOC15(SMUIO, 0, mmGOLDEN_TSC_COUNT_UPPER_Vangogh) << 32ULL);
 		break;
 	default:
-		clock = (uint64_t)RREG32_SOC15(SMUIO, 0, mmGOLDEN_TSC_COUNT_LOWER) |
-			((uint64_t)RREG32_SOC15(SMUIO, 0, mmGOLDEN_TSC_COUNT_UPPER) << 32ULL);
+		clock_hi = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_UPPER);
+		clock_lo = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_LOWER);
+		hi_check = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_UPPER);
+		/* Carryover happens every 4 Giga time cycles counts which is roughly 42 secs */
+		if (hi_check != clock_hi) {
+			clock_lo = RREG32_SOC15_NO_KIQ(SMUIO, 0, mmGOLDEN_TSC_COUNT_LOWER);
+			clock_hi = hi_check;
+		}
+		clock = (uint64_t)clock_lo | ((uint64_t)clock_hi << 32ULL);
 		break;
 	}
 	mutex_unlock(&adev->gfx.gpu_clock_mutex);
-- 
2.25.1