[PATCH] drm/amdgpu: Stop clearing kiq position during unload

[YuBiao Wang]

Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform
IDLE-SAVE after VF fini. CPG also needs to be active in save command.

Signed-off-by: YuBiao Wang <YuBiao.Wang at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 14 ++++++--------
 drivers/gpu/drm/amd/amdgpu/mes_v11_0.c |  4 +++-
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 9447999a3a48..232ccd639184 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -4411,15 +4411,13 @@ static int gfx_v11_0_hw_fini(void *handle)
 		amdgpu_mes_kiq_hw_fini(adev);
 	}
 
-	if (amdgpu_sriov_vf(adev)) {
-		gfx_v11_0_cp_gfx_enable(adev, false);
-		/* Program KIQ position of RLC_CP_SCHEDULERS during destroy */
-		tmp = RREG32_SOC15(GC, 0, regRLC_CP_SCHEDULERS);
-		tmp &= 0xffffff00;
-		WREG32_SOC15(GC, 0, regRLC_CP_SCHEDULERS, tmp);
-
+	if (amdgpu_sriov_vf(adev))
+		/* Remove the steps disabling CPG and clearing KIQ position,
+		 * so that CP could perform IDLE-SAVE during switch.
+		 * Those steps were to avoid a DMAR error in gfx9 but it is not reproduced on gfx11.
+		 */
 		return 0;
-	}
+
 	gfx_v11_0_cp_enable(adev, false);
 	gfx_v11_0_enable_gui_idle_interrupt(adev, false);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c b/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c
index 7bfe862aa83e..02ad84a1526a 100644
--- a/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c
@@ -1248,7 +1248,9 @@ static int mes_v11_0_kiq_hw_fini(struct amdgpu_device *adev)
 	if (adev->mes.ring.sched.ready)
 		mes_v11_0_kiq_dequeue_sched(adev);
 
-	mes_v11_0_enable(adev, false);
+	if (!amdgpu_sriov_vf(adev))
+		mes_v11_0_enable(adev, false);
+
 	return 0;
 }
 
-- 
2.25.1