[PATCH] drm/amdgpu: device: fix spellos and punctuation

[Alex Deucher]

Applied.  Thanks!

On Wed, Nov 27, 2024 at 11:17 PM Randy Dunlap <rdunlap at infradead.org> wrote:
>
> Make spelling and punctuation changes to ease reading of the comments.
>
> Signed-off-by: Randy Dunlap <rdunlap at infradead.org>
> Cc: Alex Deucher <alexander.deucher at amd.com>
> Cc: Christian König <christian.koenig at amd.com>
> Cc: Xinhui Pan <Xinhui.Pan at amd.com>
> Cc: amd-gfx at lists.freedesktop.org
> Cc: David Airlie <airlied at gmail.com>
> Cc: Simona Vetter <simona at ffwll.ch>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |   30 +++++++++----------
>  1 file changed, 15 insertions(+), 15 deletions(-)
>
> --- linux-next-20241125.orig/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> +++ linux-next-20241125/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
> @@ -204,9 +204,9 @@ static inline void amdgpu_device_stop_pe
>   * DOC: pcie_replay_count
>   *
>   * The amdgpu driver provides a sysfs API for reporting the total number
> - * of PCIe replays (NAKs)
> + * of PCIe replays (NAKs).
>   * The file pcie_replay_count is used for this and returns the total
> - * number of replays as a sum of the NAKs generated and NAKs received
> + * number of replays as a sum of the NAKs generated and NAKs received.
>   */
>
>  static ssize_t amdgpu_device_get_pcie_replay_count(struct device *dev,
> @@ -429,8 +429,8 @@ bool amdgpu_device_supports_boco(struct
>   * @dev: drm_device pointer
>   *
>   * Return:
> - * 1 if the device supporte BACO;
> - * 3 if the device support MACO (only works if BACO is supported)
> + * 1 if the device supports BACO;
> + * 3 if the device supports MACO (only works if BACO is supported)
>   * otherwise return 0.
>   */
>  int amdgpu_device_supports_baco(struct drm_device *dev)
> @@ -577,7 +577,7 @@ void amdgpu_device_mm_access(struct amdg
>  }
>
>  /**
> - * amdgpu_device_aper_access - access vram by vram aperature
> + * amdgpu_device_aper_access - access vram by vram aperture
>   *
>   * @adev: amdgpu_device pointer
>   * @pos: offset of the buffer in vram
> @@ -668,7 +668,7 @@ bool amdgpu_device_skip_hw_access(struct
>          * here is that the GPU reset is not running on another thread in parallel.
>          *
>          * For this we trylock the read side of the reset semaphore, if that succeeds
> -        * we know that the reset is not running in paralell.
> +        * we know that the reset is not running in parallel.
>          *
>          * If the trylock fails we assert that we are either already holding the read
>          * side of the lock or are the reset thread itself and hold the write side of
> @@ -1733,7 +1733,7 @@ bool amdgpu_device_need_post(struct amdg
>                         uint32_t fw_ver;
>
>                         err = request_firmware(&adev->pm.fw, "amdgpu/fiji_smc.bin", adev->dev);
> -                       /* force vPost if error occured */
> +                       /* force vPost if error occurred */
>                         if (err)
>                                 return true;
>
> @@ -2378,7 +2378,7 @@ int amdgpu_device_ip_block_add(struct am
>   * the module parameter virtual_display.  This feature provides a virtual
>   * display hardware on headless boards or in virtualized environments.
>   * This function parses and validates the configuration string specified by
> - * the user and configues the virtual display configuration (number of
> + * the user and configures the virtual display configuration (number of
>   * virtual connectors, crtcs, etc.) specified.
>   */
>  static void amdgpu_device_enable_virtual_display(struct amdgpu_device *adev)
> @@ -2441,7 +2441,7 @@ void amdgpu_device_set_sriov_virtual_dis
>   * @adev: amdgpu_device pointer
>   *
>   * Parses the asic configuration parameters specified in the gpu info
> - * firmware and makes them availale to the driver for use in configuring
> + * firmware and makes them available to the driver for use in configuring
>   * the asic.
>   * Returns 0 on success, -EINVAL on failure.
>   */
> @@ -2501,7 +2501,7 @@ static int amdgpu_device_parse_gpu_info_
>                                                                 le32_to_cpu(hdr->header.ucode_array_offset_bytes));
>
>                 /*
> -                * Should be droped when DAL no longer needs it.
> +                * Should be dropped when DAL no longer needs it.
>                  */
>                 if (adev->asic_type == CHIP_NAVI12)
>                         goto parse_soc_bounding_box;
> @@ -3061,7 +3061,7 @@ init_failed:
>   *
>   * Writes a reset magic value to the gart pointer in VRAM.  The driver calls
>   * this function before a GPU reset.  If the value is retained after a
> - * GPU reset, VRAM has not been lost.  Some GPU resets may destry VRAM contents.
> + * GPU reset, VRAM has not been lost. Some GPU resets may destroy VRAM contents.
>   */
>  static void amdgpu_device_fill_reset_magic(struct amdgpu_device *adev)
>  {
> @@ -3376,7 +3376,7 @@ static int amdgpu_device_ip_fini_early(s
>
>         amdgpu_amdkfd_suspend(adev, false);
>
> -       /* Workaroud for ASICs need to disable SMC first */
> +       /* Workaround for ASICs need to disable SMC first */
>         amdgpu_device_smu_fini_early(adev);
>
>         for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
> @@ -4271,7 +4271,7 @@ int amdgpu_device_init(struct amdgpu_dev
>
>         /*
>          * Reset domain needs to be present early, before XGMI hive discovered
> -        * (if any) and intitialized to use reset sem and in_gpu reset flag
> +        * (if any) and initialized to use reset sem and in_gpu reset flag
>          * early on during init and before calling to RREG32.
>          */
>         adev->reset_domain = amdgpu_reset_create_reset_domain(SINGLE_DEVICE, "amdgpu-reset-dev");
> @@ -5862,7 +5862,7 @@ int amdgpu_device_gpu_recover(struct amd
>                 amdgpu_amdkfd_pre_reset(tmp_adev, reset_context);
>
>                 /*
> -                * Mark these ASICs to be reseted as untracked first
> +                * Mark these ASICs to be reset as untracked first
>                  * And add them back after reset completed
>                  */
>                 amdgpu_unregister_gpu_instance(tmp_adev);
> @@ -6065,7 +6065,7 @@ static void amdgpu_device_partner_bandwi
>   *
>   * @adev: amdgpu_device pointer
>   *
> - * Fetchs and stores in the driver the PCIE capabilities (gen speed
> + * Fetches and stores in the driver the PCIE capabilities (gen speed
>   * and lanes) of the slot the device is in. Handles APUs and
>   * virtualized environments where PCIE config space may not be available.
>   */