[PATCH 1/6] drm/amdgpu: Power up UVD 3 for FW validation

[Timur Kristóf]

Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.

When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.

Fixes: b38f3e80ecec ("drm amdgpu: SI UVD v3_1 (v2)")
Signed-off-by: Timur Kristóf <timur.kristof at gmail.com>
---
 drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c b/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
index 5dbaebb592b3..9ad06c1e150d 100644
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
@@ -633,6 +633,12 @@ static int uvd_v3_1_hw_init(struct amdgpu_ip_block *ip_block)
 	int r;
 
 	uvd_v3_1_mc_resume(adev);
+	uvd_v3_1_enable_mgcg(adev, true);
+
+	if (adev->pm.dpm_enabled)
+		amdgpu_dpm_enable_uvd(adev, true);
+	else
+		amdgpu_asic_set_uvd_clocks(adev, 53300, 40000);
 
 	r = uvd_v3_1_fw_validate(adev);
 	if (r) {
@@ -640,9 +646,6 @@ static int uvd_v3_1_hw_init(struct amdgpu_ip_block *ip_block)
 		return r;
 	}
 
-	uvd_v3_1_enable_mgcg(adev, true);
-	amdgpu_asic_set_uvd_clocks(adev, 53300, 40000);
-
 	uvd_v3_1_start(adev);
 
 	r = amdgpu_ring_test_helper(ring);
-- 
2.50.1