Compiling dbus 0.21 errors

[Peter]

Owen Fraser-Green wrote:

> Hi,
> 
> I'm not exactly a sage here either I'm afraid as I've never even looked
> at the Python bindings but according to your error message your missing
> a module called Plex.Lexicons. Looking at my own Pyrex installation,
> Lexicons.py is a part of that installation. I see from the error stack
> that you do, however, have a lot of other files from Pyrex.
> 
> If you do:
> 
> locate Lexicon.py
> 
> does it find anything? 

Yes, in the Pyrex Source and Build dirs, and in the python
2.3/site-packages/Pyrex/Compiler directory.

Maybe someone else will have an inspiration! Thanks again.

> If not then I'd suggest going back to the Pyrex 
> installation and figuring out why it didn't get installed. If it does
> exist but at a path other than '/usr/lib/python2.3/site-packages/' then
> you could try typing:
> 
> export PYTHONPATH=/usr/...your path here without the site-packages...
> 
> then try again. Good luck!
> 
> Cheers,
> Owen
> 
> 
> On Sun, 2004-05-02 at 21:12, Peter wrote:
>> Thanks, Owen. Got over the hump in the mono dir, but I still have a
>> problem here. Pyrex DID install properly, but I am no sage here. Any
>> suggestions are appreciated!
>> 
>> make[2]: Entering directory `/mnt/src/rox/dbus/dbus/python'
>> pyrexc dbus_bindings.pyx
>> Traceback (most recent call last):
>>   File "/usr/bin/pyrexc", line 8, in ?
>>     main(command_line = 1)
>>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
>>   270,
>> in main
>>     result = context.compile(source, options)
>>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
>>   174,
>> in compile
>>     tree = self.parse(source, scope.type_names, pxd = 0)
>>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
>>   137,
>> in parse
>>     type_names = type_names, context = self)
>>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
>>   line
>> 175, in __init__
>>     Scanner.__init__(self, get_lexicon(), file, filename)
>>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
>>   line
>> 127, in get_lexicon
>>     try_to_unpickle_lexicon()
>>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
>>   line
>> 93, in try_to_unpickle_lexicon
>>     lexicon = pickle.load(f)
>> ImportError: No module named Plex.Lexicons
>> make[2]: [dbus_bindings.c] Error 1 (ignored)
>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
>> -I..
>> -I../glib  -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
>> -I/usr/include/python2.3  -DDBUS_API_SUBJECT_TO_CHANGE=1   -g -O2 -Wall
>> -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes
>> -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -MT
>> dbus_bindings.lo -MD -MP -MF ".deps/dbus_bindings.Tpo" \
>>   -c -o dbus_bindings.lo `test -f 'dbus_bindings.c' || echo
>> './'`dbus_bindings.c; \
>> then mv -f ".deps/dbus_bindings.Tpo" ".deps/dbus_bindings.Plo"; \
>> else rm -f ".deps/dbus_bindings.Tpo"; exit 1; \
>> fi
>> rm -f .libs/dbus_bindings.lo
>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../glib -I/usr/include/glib-2.0
>> -I/usr/lib/glib-2.0/include -I/usr/include/python2.3
>> -DDBUS_API_SUBJECT_TO_CHANGE=1 -g -O2 -Wall -Wchar-subscripts
>> -Wmissing-declarations -Wmissing-prototypes -Wnested-externs
>> -Wpointer-arith -Wcast-align -Wsign-compare -MT dbus_bindings.lo -MD -MP
>> -MF .deps/dbus_bindings.Tpo -c ./dbus_bindings.c  -fPIC -DPIC
>> -o .libs/dbus_bindings.lo
>> gcc: ./dbus_bindings.c: No such file or directory
>> gcc: no input files
>> make[2]: *** [dbus_bindings.lo] Error 1
>> make[2]: Leaving directory `/mnt/src/rox/dbus/dbus/python'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/mnt/src/rox/dbus/dbus'
>> make: *** [all] Error 2
>> peter at peter:/mnt/src/rox/dbus/dbus$
>> Owen Fraser-Green wrote:
>> 
>> > Hi,
>> > 
>> > That test-dbus-sharp.exe program had some threading issues anyway so
>> > for now I've disabled it from the 'all' target in the build until I get
>> > a chance to look into it later. If you do another checkout from CVS it
>> > should skip it now.
>> > 
>> > Cheers,
>> > Owen
>> > 
>> > On Sun, 2004-05-02 at 15:24, Peter wrote:
>> >> Kernel 2.6.5
>> >> Slackware 9.1
>> >> Python -V: 2.3.1
>> >> Pyrex: 0.9.1.1
>> >> 
>> >> I intend to use this in order to compile Rox-Session.
>> >> 
>> >> I tried CVS-ing the latest 5/2/04 and received the following.
>> >> 
>> >> Making all in mono
>> >> make[2]: Entering directory `/mnt/src/rox/dbus/dbus/mono'
>> >> mcs  --unsafe --target exe -L . -r dbus-sharp.dll -r gtk-sharp.dll -o
>> >> test-dbus-sharp.exe Test.cs
>> >> error CS0006: Cannot find assembly `gtk-sharp.dll'
>> >> Log:
>> >> 
>> >> Compilation failed: 1 error(s), 0 warnings
>> >> make[2]: *** [test-dbus-sharp.exe] Error 1
>> >> make[2]: Leaving directory `/mnt/src/rox/dbus/dbus/mono'
>> >> make[1]: *** [all-recursive] Error 1
>> >> make[1]: Leaving directory `/mnt/src/rox/dbus/dbus'
>> >> make: *** [all] Error 2
>> >> 
>> >> I tried to make gtk-sharp.dll directly, but there was no rule.
>> >> ----------------
>> >> I downloaded the 0.21 tarball and received the following error:
>> >> 
>> >> Making all in python
>> >> Traceback (most recent call last):
>> >>   File "/usr/bin/pyrexc", line 8, in ?
>> >>     main(command_line = 1)
>> >>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
>> >>   270,
>> >> in main
>> >>     result = context.compile(source, options)
>> >>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
>> >>   174,
>> >> in compile
>> >>     tree = self.parse(source, scope.type_names, pxd = 0)
>> >>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
>> >>   137,
>> >> in parse
>> >>     type_names = type_names, context = self)
>> >>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
>> >>   line
>> >> 175, in __init__
>> >>     Scanner.__init__(self, get_lexicon(), file, filename)
>> >>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
>> >>   line
>> >> 127, in get_lexicon
>> >>     try_to_unpickle_lexicon()
>> >>   File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
>> >>   line
>> >> 93, in try_to_unpickle_lexicon
>> >>     lexicon = pickle.load(f)
>> >> ImportError: No module named Plex.Lexicons
>> >>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../glib
>> >>  -I/usr/include/glib-2.0
>> >> -I/usr/lib/glib-2.0/include -I/usr/include/python2.3
>> >> -DDBUS_API_SUBJECT_TO_CHANGE=1 -g -O2 -Wall -Wchar-subscripts
>> >> -Wmissing-declarations -Wmissing-prototypes -Wnested-externs
>> >> -Wpointer-arith -Wcast-align -Wsign-compare -MT dbus_bindings.lo -MD
>> >> -MP
>> >> -MF .deps/dbus_bindings.Tpo -c ./dbus_bindings.c  -fPIC -DPIC
>> >> -o .libs/dbus_bindings.o
>> >> gcc: ./dbus_bindings.c: No such file or directory
>> >> gcc: no input files
>> >> make[2]: *** [dbus_bindings.lo] Error 1
>> >> make[1]: *** [all-recursive] Error 1
>> >> make: *** [all] Error 2
>> >> 
>> >> In both cases, I used the default ./configure switches but added
>> >> --sysconfdir=/etc.
>> >> 
>> >> Thanks for any suggestions.
>> >>
>> 
>>