Compiling dbus 0.21 errors
Owen Fraser-Green
owen at discobabe.net
Mon May 3 21:03:57 EST 2004
Hi,
Sorry, I missed an 's'. That should have been
locate Lexicons.py
It should be located in the Plex directory unlike Lexicon.py which
should be Pyrex/Compiler. On my system Lexicons.py is part of the same
Pyrex package but maybe your package didn't contain the Plex directory.
Cheers,
Owen
On Mon, 2004-05-03 at 11:55, Peter wrote:
> Owen Fraser-Green wrote:
>
> > Hi,
> >
> > I'm not exactly a sage here either I'm afraid as I've never even looked
> > at the Python bindings but according to your error message your missing
> > a module called Plex.Lexicons. Looking at my own Pyrex installation,
> > Lexicons.py is a part of that installation. I see from the error stack
> > that you do, however, have a lot of other files from Pyrex.
> >
> > If you do:
> >
> > locate Lexicon.py
> >
> > does it find anything?
>
> Yes, in the Pyrex Source and Build dirs, and in the python
> 2.3/site-packages/Pyrex/Compiler directory.
>
> Maybe someone else will have an inspiration! Thanks again.
>
> > If not then I'd suggest going back to the Pyrex
> > installation and figuring out why it didn't get installed. If it does
> > exist but at a path other than '/usr/lib/python2.3/site-packages/' then
> > you could try typing:
> >
> > export PYTHONPATH=/usr/...your path here without the site-packages...
> >
> > then try again. Good luck!
> >
> > Cheers,
> > Owen
> >
> >
> > On Sun, 2004-05-02 at 21:12, Peter wrote:
> >> Thanks, Owen. Got over the hump in the mono dir, but I still have a
> >> problem here. Pyrex DID install properly, but I am no sage here. Any
> >> suggestions are appreciated!
> >>
> >> make[2]: Entering directory `/mnt/src/rox/dbus/dbus/python'
> >> pyrexc dbus_bindings.pyx
> >> Traceback (most recent call last):
> >> File "/usr/bin/pyrexc", line 8, in ?
> >> main(command_line = 1)
> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
> >> 270,
> >> in main
> >> result = context.compile(source, options)
> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
> >> 174,
> >> in compile
> >> tree = self.parse(source, scope.type_names, pxd = 0)
> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
> >> 137,
> >> in parse
> >> type_names = type_names, context = self)
> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
> >> line
> >> 175, in __init__
> >> Scanner.__init__(self, get_lexicon(), file, filename)
> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
> >> line
> >> 127, in get_lexicon
> >> try_to_unpickle_lexicon()
> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
> >> line
> >> 93, in try_to_unpickle_lexicon
> >> lexicon = pickle.load(f)
> >> ImportError: No module named Plex.Lexicons
> >> make[2]: [dbus_bindings.c] Error 1 (ignored)
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..
> >> -I..
> >> -I../glib -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
> >> -I/usr/include/python2.3 -DDBUS_API_SUBJECT_TO_CHANGE=1 -g -O2 -Wall
> >> -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes
> >> -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -MT
> >> dbus_bindings.lo -MD -MP -MF ".deps/dbus_bindings.Tpo" \
> >> -c -o dbus_bindings.lo `test -f 'dbus_bindings.c' || echo
> >> './'`dbus_bindings.c; \
> >> then mv -f ".deps/dbus_bindings.Tpo" ".deps/dbus_bindings.Plo"; \
> >> else rm -f ".deps/dbus_bindings.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/dbus_bindings.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../glib -I/usr/include/glib-2.0
> >> -I/usr/lib/glib-2.0/include -I/usr/include/python2.3
> >> -DDBUS_API_SUBJECT_TO_CHANGE=1 -g -O2 -Wall -Wchar-subscripts
> >> -Wmissing-declarations -Wmissing-prototypes -Wnested-externs
> >> -Wpointer-arith -Wcast-align -Wsign-compare -MT dbus_bindings.lo -MD -MP
> >> -MF .deps/dbus_bindings.Tpo -c ./dbus_bindings.c -fPIC -DPIC
> >> -o .libs/dbus_bindings.lo
> >> gcc: ./dbus_bindings.c: No such file or directory
> >> gcc: no input files
> >> make[2]: *** [dbus_bindings.lo] Error 1
> >> make[2]: Leaving directory `/mnt/src/rox/dbus/dbus/python'
> >> make[1]: *** [all-recursive] Error 1
> >> make[1]: Leaving directory `/mnt/src/rox/dbus/dbus'
> >> make: *** [all] Error 2
> >> peter at peter:/mnt/src/rox/dbus/dbus$
> >> Owen Fraser-Green wrote:
> >>
> >> > Hi,
> >> >
> >> > That test-dbus-sharp.exe program had some threading issues anyway so
> >> > for now I've disabled it from the 'all' target in the build until I get
> >> > a chance to look into it later. If you do another checkout from CVS it
> >> > should skip it now.
> >> >
> >> > Cheers,
> >> > Owen
> >> >
> >> > On Sun, 2004-05-02 at 15:24, Peter wrote:
> >> >> Kernel 2.6.5
> >> >> Slackware 9.1
> >> >> Python -V: 2.3.1
> >> >> Pyrex: 0.9.1.1
> >> >>
> >> >> I intend to use this in order to compile Rox-Session.
> >> >>
> >> >> I tried CVS-ing the latest 5/2/04 and received the following.
> >> >>
> >> >> Making all in mono
> >> >> make[2]: Entering directory `/mnt/src/rox/dbus/dbus/mono'
> >> >> mcs --unsafe --target exe -L . -r dbus-sharp.dll -r gtk-sharp.dll -o
> >> >> test-dbus-sharp.exe Test.cs
> >> >> error CS0006: Cannot find assembly `gtk-sharp.dll'
> >> >> Log:
> >> >>
> >> >> Compilation failed: 1 error(s), 0 warnings
> >> >> make[2]: *** [test-dbus-sharp.exe] Error 1
> >> >> make[2]: Leaving directory `/mnt/src/rox/dbus/dbus/mono'
> >> >> make[1]: *** [all-recursive] Error 1
> >> >> make[1]: Leaving directory `/mnt/src/rox/dbus/dbus'
> >> >> make: *** [all] Error 2
> >> >>
> >> >> I tried to make gtk-sharp.dll directly, but there was no rule.
> >> >> ----------------
> >> >> I downloaded the 0.21 tarball and received the following error:
> >> >>
> >> >> Making all in python
> >> >> Traceback (most recent call last):
> >> >> File "/usr/bin/pyrexc", line 8, in ?
> >> >> main(command_line = 1)
> >> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
> >> >> 270,
> >> >> in main
> >> >> result = context.compile(source, options)
> >> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
> >> >> 174,
> >> >> in compile
> >> >> tree = self.parse(source, scope.type_names, pxd = 0)
> >> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Main.py", line
> >> >> 137,
> >> >> in parse
> >> >> type_names = type_names, context = self)
> >> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
> >> >> line
> >> >> 175, in __init__
> >> >> Scanner.__init__(self, get_lexicon(), file, filename)
> >> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
> >> >> line
> >> >> 127, in get_lexicon
> >> >> try_to_unpickle_lexicon()
> >> >> File "/usr/lib/python2.3/site-packages/Pyrex/Compiler/Scanning.py",
> >> >> line
> >> >> 93, in try_to_unpickle_lexicon
> >> >> lexicon = pickle.load(f)
> >> >> ImportError: No module named Plex.Lexicons
> >> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../glib
> >> >> -I/usr/include/glib-2.0
> >> >> -I/usr/lib/glib-2.0/include -I/usr/include/python2.3
> >> >> -DDBUS_API_SUBJECT_TO_CHANGE=1 -g -O2 -Wall -Wchar-subscripts
> >> >> -Wmissing-declarations -Wmissing-prototypes -Wnested-externs
> >> >> -Wpointer-arith -Wcast-align -Wsign-compare -MT dbus_bindings.lo -MD
> >> >> -MP
> >> >> -MF .deps/dbus_bindings.Tpo -c ./dbus_bindings.c -fPIC -DPIC
> >> >> -o .libs/dbus_bindings.o
> >> >> gcc: ./dbus_bindings.c: No such file or directory
> >> >> gcc: no input files
> >> >> make[2]: *** [dbus_bindings.lo] Error 1
> >> >> make[1]: *** [all-recursive] Error 1
> >> >> make: *** [all] Error 2
> >> >>
> >> >> In both cases, I used the default ./configure switches but added
> >> >> --sysconfdir=/etc.
> >> >>
> >> >> Thanks for any suggestions.
> >> >>
> >>
> >>
>
>
More information about the dbus
mailing list