dbus-1.2.20 & nexenta(based on opensolaris b133): crash

[eXeC001er]

additional information:

only dbus-daemon is corrupted. other files (dbus-lauch, dbus-send,
dbus-monitor, ...) are normaly.

2010/2/22 eXeC001er <execooler at gmail.com>

> dbus built with gnu-gcc-4.2.3.
>
> On Nexenta i installed dbx and
> 1. tried to load dbus-daemon (compiled on nexenta):
> dbx: File `/usr/bin/dbus-daemon' is not ELF executable
>
> 2. tried to load dbus-daemon (compiled on opensolaris):
> no error messages
>
>
> Why? dbus-1.1.20 on this system (nexenta) compiled and works without
> problem.
>
> Thanks.
>
> 2010/2/22 Brian Cameron <Brian.Cameron at sun.com>
>
>
>> The following stack trace isn't very useful.  Is dbus-daemon
>> built with Sun Studio?  If so, you might get a better stack trace
>> from dbx, rather than using gdb.
>>
>> Brian
>>
>>  Program received signal SIGSEGV, Segmentation fault.
>>> 0x00000000 in ?? ()
>>> (gdb) bt
>>> #0  0x00000000 in ?? ()
>>> #1  0xfe916680 in ?? () from /lib/libgcc_s.so.1
>>> #2  0xfe9163d5 in ?? () from /lib/libgcc_s.so.1
>>> #3  0xfef893c6 in call_init () from /lib/ld.so.1
>>> #4  0xfef882cb in setup () from /lib/ld.so.1
>>> #5  0xfef9626c in _setup () from /lib/ld.so.1
>>> #6  0xfef7c694 in _rt_boot () from /lib/ld.so.1
>>> #7  0x08047524 in ?? ()
>>> #8  0x08047644 in ?? ()
>>> Backtrace stopped: previous frame inner to this frame (corrupt stack?)
>>> (gdb)
>>>
>>>
>>> I tried to build version 1.2.20 on native Opensolaris and net run on
>>> NexentaOS. dbus-daemon running without problem.
>>> NexentaOS has gcc 4.2.3 and dbus 1.1.20 worked without problem.
>>>
>>> truss output for dbus-daemon (compilled on NexentaOS):
>>> ........
>>>   mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC,
>>> MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFECD0000
>>>   getcontext(0x08047038)
>>>   getrlimit(RLIMIT_STACK, 0x08047030)             = 0
>>>   getpid()                                        = 6752 [6751]
>>>   lwp_private(0, 1, 0xFECD2A00)                   = 0x000001C3
>>>   setustack(0xFECD2A60)
>>>       Incurred fault #6, FLTBOUNDS  %pc = 0x00000000
>>>         siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
>>>       Received signal #11, SIGSEGV [default]
>>>         siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
>>>
>>> truss output for dbus-daemon (compilled on opensolaris):
>>> .......
>>>   mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC,
>>> MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF20000
>>>   getcontext(0x08046FE8)
>>>   getrlimit(RLIMIT_STACK, 0x08046FE0)             = 0
>>>   getpid()                                        = 6762 [6761]
>>>   lwp_private(0, 1, 0xFEF22A00)                   = 0x000001C3
>>>   setustack(0xFEF22A60)
>>>   sysconfig(_CONFIG_STACK_PROT)                   = 7
>>>   sigfillset(0xFEC296A0)                          = 0
>>>    sysi86(SI86FPSTART, 0xFEC29FCC, 0x0000133F, 0x00001F80) = 0x00000001
>>>    brk(0x080C4930)                                 = 0
>>>    brk(0x080C6930)                                 = 0
>>>    fstat64(2, 0x08047170)                          = 0
>>>    write(2, " N o   c o n f i g u r a".., 33)      = 33
>>>    write(2, " d b u s - d a e m o n ".., 161)     = 161
>>>    _exit(1)
>>>
>>> Maybe you have any thoughts on any subject.
>>> Thanks.
>>>
>>>
>>>
>>> _______________________________________________
>>> dbus mailing list
>>> dbus at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/dbus
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dbus/attachments/20100222/dae83d35/attachment.htm>