[RFC 4/5] video: panel: Add R61505 panel support
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Aug 16 17:49:42 PDT 2012
The R61505 is a SYS-80 bus panel controller from Renesas.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
drivers/video/panel/Kconfig | 9 +
drivers/video/panel/Makefile | 1 +
drivers/video/panel/panel-r61505.c | 520 ++++++++++++++++++++++++++++++++++++
include/video/panel-r61505.h | 27 ++
4 files changed, 557 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/panel/panel-r61505.c
create mode 100644 include/video/panel-r61505.h
diff --git a/drivers/video/panel/Kconfig b/drivers/video/panel/Kconfig
index fd0b3cf..12d7712 100644
--- a/drivers/video/panel/Kconfig
+++ b/drivers/video/panel/Kconfig
@@ -16,4 +16,13 @@ config DISPLAY_PANEL_DBI
tristate
default n
+config DISPLAY_PANEL_R61505
+ tristate "Renesas R61505-based Display Panel"
+ select DISPLAY_PANEL_DBI
+ ---help---
+ Support panels based on the Renesas R61505 panel controller.
+ Those panels are controlled through a MIPI DBI interface.
+
+ If you are in doubt, say N.
+
endif # DISPLAY_PANEL
diff --git a/drivers/video/panel/Makefile b/drivers/video/panel/Makefile
index 2ab0520..e4fb9fe 100644
--- a/drivers/video/panel/Makefile
+++ b/drivers/video/panel/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_DISPLAY_PANEL) += panel.o
obj-$(CONFIG_DISPLAY_PANEL_DUMMY) += panel-dummy.o
obj-$(CONFIG_DISPLAY_PANEL_DBI) += panel-dbi.o
+obj-$(CONFIG_DISPLAY_PANEL_R61505) += panel-r61505.o
diff --git a/drivers/video/panel/panel-r61505.c b/drivers/video/panel/panel-r61505.c
new file mode 100644
index 0000000..e09455e
--- /dev/null
+++ b/drivers/video/panel/panel-r61505.c
@@ -0,0 +1,520 @@
+/*
+ * Renesas R61505-based Display Panels
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Based on SuperH MigoR Quarter VGA LCD Panel
+ * Copyright (C) 2008 Magnus Damm
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <video/panel-r61505.h>
+#include <video/panel-dbi.h>
+
+#define R61505_DEVICE_CODE 0x0000
+#define R61505_DEVICE_CODE_VALUE 0x1505
+#define R61505_DRIVER_OUTPUT_CONTROL 0x0001
+#define R61505_DRIVER_OUTPUT_CONTROL_SM (1 << 10)
+#define R61505_DRIVER_OUTPUT_CONTROL_SS (1 << 8)
+#define R61505_LCD_WAVEFORM 0x0002
+#define R61505_LCD_WAVEFORM_BC0 (1 << 9)
+#define R61505_LCD_WAVEFORM_EOR (1 << 8)
+#define R61505_ENTRY_MODE 0x0003
+#define R61505_ENTRY_MODE_TRIREG (1 << 15)
+#define R61505_ENTRY_MODE_DFM (1 << 14)
+#define R61505_ENTRY_MODE_BGR (1 << 12)
+#define R61505_ENTRY_MODE_HWM (1 << 9)
+#define R61505_ENTRY_MODE_ORG (1 << 7)
+#define R61505_ENTRY_MODE_ID1 (1 << 5)
+#define R61505_ENTRY_MODE_ID0 (1 << 4)
+#define R61505_ENTRY_MODE_AM (1 << 3)
+#define R61505_RESIZE_CONTROL 0x0004
+#define R61505_RESIZE_CONTROL_RCV(n) (((n) & 3) << 8)
+#define R61505_RESIZE_CONTROL_RCH(n) (((n) & 3) << 4)
+#define R61505_RESIZE_CONTROL_RSZ_4 (3 << 0)
+#define R61505_RESIZE_CONTROL_RSZ_2 (1 << 0)
+#define R61505_RESIZE_CONTROL_RSZ_1 (0 << 0)
+#define R61505_DISPLAY_CONTROL1 0x0007
+#define R61505_DISPLAY_CONTROL1_PTDE1 (1 << 13)
+#define R61505_DISPLAY_CONTROL1_PTDE0 (1 << 12)
+#define R61505_DISPLAY_CONTROL1_BASEE (1 << 8)
+#define R61505_DISPLAY_CONTROL1_VON (1 << 6)
+#define R61505_DISPLAY_CONTROL1_GON (1 << 5)
+#define R61505_DISPLAY_CONTROL1_DTE (1 << 4)
+#define R61505_DISPLAY_CONTROL1_COL (1 << 3)
+#define R61505_DISPLAY_CONTROL1_D1 (1 << 1)
+#define R61505_DISPLAY_CONTROL1_D0 (1 << 0)
+#define R61505_DISPLAY_CONTROL2 0x0008
+#define R61505_DISPLAY_CONTROL2_FP(n) (((n) & 0xf) << 8)
+#define R61505_DISPLAY_CONTROL2_BP(n) (((n) & 0xf) << 0)
+#define R61505_DISPLAY_CONTROL3 0x0009
+#define R61505_DISPLAY_CONTROL3_PTS(n) (((n) & 7) << 8)
+#define R61505_DISPLAY_CONTROL3_PTG(n) (((n) & 3) << 3)
+#define R61505_DISPLAY_CONTROL3_ICS(n) (((n) & 0xf) << 0)
+#define R61505_DISPLAY_CONTROL4 0x000a
+#define R61505_DISPLAY_CONTROL4_FMARKOE (1 << 3)
+#define R61505_DISPLAY_CONTROL4_FMI_6 (5 << 0)
+#define R61505_DISPLAY_CONTROL4_FMI_4 (3 << 0)
+#define R61505_DISPLAY_CONTROL4_FMI_2 (1 << 0)
+#define R61505_DISPLAY_CONTROL4_FMI_1 (0 << 0)
+#define R61505_EXT_DISPLAY_IF_CONTROL1 0x000c
+#define R61505_EXT_DISPLAY_IF_CONTROL1_ENC(n) (((n) & 7) << 12)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_RM (1 << 8)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_DM_VSYNC (2 << 4)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_DM_RGB (1 << 4)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_DM_ICLK (0 << 4)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_RIM_6 (2 << 0)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_RIM_16 (1 << 0)
+#define R61505_EXT_DISPLAY_IF_CONTROL1_RIM_18 (0 << 0)
+#define R61505_FRAME_MARKER_CONTROL 0x000d
+#define R61505_FRAME_MARKER_CONTROL_FMP(n) (((n) & 0x1ff) << 0)
+#define R61505_EXT_DISPLAY_IF_CONTROL2 0x000f
+#define R61505_POWER_CONTROL1 0x0010
+#define R61505_POWER_CONTROL1_SAP (1 << 12)
+#define R61505_POWER_CONTROL1_BT(n) (((n) & 0xf) << 8)
+#define R61505_POWER_CONTROL1_APE (1 << 7)
+#define R61505_POWER_CONTROL1_AP_100 (3 << 4)
+#define R61505_POWER_CONTROL1_AP_075 (2 << 4)
+#define R61505_POWER_CONTROL1_AP_050 (1 << 4)
+#define R61505_POWER_CONTROL1_AP_HALT (0 << 4)
+#define R61505_POWER_CONTROL1_DSTB (1 << 2)
+#define R61505_POWER_CONTROL1_SLP (1 << 1)
+#define R61505_POWER_CONTROL2 0x0011
+#define R61505_POWER_CONTROL2_DC1_HALT (6 << 8)
+#define R61505_POWER_CONTROL2_DC1_FOSC_256 (4 << 8)
+#define R61505_POWER_CONTROL2_DC1_FOSC_128 (3 << 8)
+#define R61505_POWER_CONTROL2_DC1_FOSC_64 (2 << 8)
+#define R61505_POWER_CONTROL2_DC1_FOSC_32 (1 << 8)
+#define R61505_POWER_CONTROL2_DC1_FOSC_16 (0 << 8)
+#define R61505_POWER_CONTROL2_DC0_HALT (6 << 4)
+#define R61505_POWER_CONTROL2_DC0_FOSC_16 (4 << 4)
+#define R61505_POWER_CONTROL2_DC0_FOSC_8 (3 << 4)
+#define R61505_POWER_CONTROL2_DC0_FOSC_4 (2 << 4)
+#define R61505_POWER_CONTROL2_DC0_FOSC_2 (1 << 4)
+#define R61505_POWER_CONTROL2_DC0_FOSC (0 << 4)
+#define R61505_POWER_CONTROL2_VC_100 (7 << 0)
+#define R61505_POWER_CONTROL2_VC_076 (4 << 0)
+#define R61505_POWER_CONTROL2_VC_089 (1 << 0)
+#define R61505_POWER_CONTROL2_VC_094 (0 << 0)
+#define R61505_POWER_CONTROL3 0x0012
+#define R61505_POWER_CONTROL3_VCMR (1 << 8)
+#define R61505_POWER_CONTROL3_PSON (1 << 5)
+#define R61505_POWER_CONTROL3_PON (1 << 4)
+#define R61505_POWER_CONTROL3_VRH(n) (((n) & 0xf) << 0)
+#define R61505_POWER_CONTROL4 0x0013
+#define R61505_POWER_CONTROL4_VDV(n) (((n) & 0xf) << 8)
+#define R61505_POWER_CONTROL5 0x0015
+#define R61505_POWER_CONTROL5_BLDM (1 << 12)
+#define R61505_POWER_CONTROL6 0x0017
+#define R61505_POWER_CONTROL6_PSE (1 << 0)
+#define R61505_RAM_ADDR_HORZ 0x0020
+#define R61505_RAM_ADDR_VERT 0x0021
+#define R61505_RAM_DATA 0x0022
+#define R61505_POWER_CONTROL7 0x0029
+#define R61505_POWER_CONTROL7_VCM1(n) (((n) & 0x1f) << 0)
+#define R61505_GAMMA_CONTROL1 0x0030
+#define R61505_GAMMA_CONTROL2 0x0031
+#define R61505_GAMMA_CONTROL3 0x0032
+#define R61505_GAMMA_CONTROL4 0x0033
+#define R61505_GAMMA_CONTROL5 0x0034
+#define R61505_GAMMA_CONTROL6 0x0035
+#define R61505_GAMMA_CONTROL7 0x0036
+#define R61505_GAMMA_CONTROL8 0x0037
+#define R61505_GAMMA_CONTROL9 0x0038
+#define R61505_GAMMA_CONTROL10 0x0039
+#define R61505_GAMMA_CONTROL11 0x003a
+#define R61505_GAMMA_CONTROL12 0x003b
+#define R61505_GAMMA_CONTROL13 0x003c
+#define R61505_GAMMA_CONTROL14 0x003d
+#define R61505_WINDOW_HORZ_START 0x0050
+#define R61505_WINDOW_HORZ_END 0x0051
+#define R61505_WINDOW_VERT_START 0x0052
+#define R61505_WINDOW_VERT_END 0x0053
+#define R61505_DRIVER_OUTPUT_CONTROL2 0x0060
+#define R61505_DRIVER_OUTPUT_CONTROL2_GS (1 << 15)
+#define R61505_DRIVER_OUTPUT_CONTROL2_NL(n) (((n) & 0x3f) << 8)
+#define R61505_DRIVER_OUTPUT_CONTROL2_SCN(n) (((n) & 0x3f) << 0)
+#define R61505_BASE_IMG_DISPLAY_CONTROL 0x0061
+#define R61505_BASE_IMG_DISPLAY_CONTROL_NDL (1 << 2)
+#define R61505_BASE_IMG_DISPLAY_CONTROL_VLE (1 << 1)
+#define R61505_BASE_IMG_DISPLAY_CONTROL_REV (1 << 0)
+#define R61505_VERTICAL_SCROLL_CONTROL 0x006a
+#define R61505_PANEL_IF_CONTROL1 0x0090
+#define R61505_PANEL_IF_CONTROL1_DIVI(n) (((n) & 3) << 8)
+#define R61505_PANEL_IF_CONTROL1_RTNI(n) (((n) & 0x1f) << 0)
+#define R61505_PANEL_IF_CONTROL2 0x0092
+#define R61505_PANEL_IF_CONTROL2_NOWI(n) (((n) & 7) << 8)
+#define R61505_PANEL_IF_CONTROL3 0x0093
+#define R61505_PANEL_IF_CONTROL3_MCP(n) (((n) & 7) << 8)
+#define R61505_PANEL_IF_CONTROL4 0x0095
+#define R61505_PANEL_IF_CONTROL5 0x0097
+#define R61505_PANEL_IF_CONTROL6 0x0098
+#define R61505_OSCILLATION_CONTROL 0x00a4
+#define R61505_OSCILLATION_CONTROL_CALB (1 << 0)
+
+struct r61505 {
+ struct panel panel;
+ struct panel_dbi_device *dbi;
+ const struct panel_r61505_platform_data *pdata;
+};
+
+#define to_panel(p) container_of(p, struct r61505, panel)
+
+/* -----------------------------------------------------------------------------
+ * Read, write and reset
+ */
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(u16 data)
+{
+ return (((data << 1) | 0x00000001) & 0x000001ff) |
+ (((data << 2) | 0x00000200) & 0x0003fe00);
+}
+
+static void r61505_write_command(struct r61505 *panel, u16 reg)
+{
+ panel_dbi_write_command(panel->dbi, adjust_reg18(reg));
+}
+
+static void r61505_write(struct r61505 *panel, u16 reg, u16 data)
+{
+ panel_dbi_write_command(panel->dbi, adjust_reg18(reg));
+ panel_dbi_write_data(panel->dbi, adjust_reg18(data));
+}
+
+static u16 r61505_read(struct r61505 *panel, u16 reg)
+{
+ unsigned long data;
+
+ panel_dbi_write_command(panel->dbi, adjust_reg18(reg));
+ data = panel_dbi_read_data(panel->dbi);
+
+ return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void r61505_write_array(struct r61505 *panel,
+ const u16 *data, unsigned int len)
+{
+ unsigned int i;
+
+ for (i = 0; i < len; i += 2)
+ r61505_write(panel, data[i], data[i + 1]);
+}
+
+static void r61505_reset(struct r61505 *panel)
+{
+ if (panel->pdata->reset < 0)
+ return;
+
+ gpio_set_value(panel->pdata->reset, 0);
+ usleep_range(2000, 2500);
+ gpio_set_value(panel->pdata->reset, 1);
+ usleep_range(1000, 1500);
+}
+
+/* -----------------------------------------------------------------------------
+ * Configuration
+ */
+
+static const unsigned short sync_data[] = {
+ 0x0000, 0x0000,
+ 0x0000, 0x0000,
+ 0x0000, 0x0000,
+ 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+ R61505_DISPLAY_CONTROL2, R61505_DISPLAY_CONTROL2_FP(8) |
+ R61505_DISPLAY_CONTROL2_BP(8),
+ R61505_PANEL_IF_CONTROL1, R61505_PANEL_IF_CONTROL1_RTNI(26),
+ R61505_DISPLAY_CONTROL1, R61505_DISPLAY_CONTROL1_D0,
+ R61505_POWER_CONTROL6, R61505_POWER_CONTROL6_PSE,
+ 0x0019, 0x0000,
+ R61505_POWER_CONTROL1, R61505_POWER_CONTROL1_SAP |
+ R61505_POWER_CONTROL1_BT(7) |
+ R61505_POWER_CONTROL1_APE |
+ R61505_POWER_CONTROL1_AP_100,
+ R61505_POWER_CONTROL2, R61505_POWER_CONTROL2_DC1_FOSC_32 |
+ R61505_POWER_CONTROL2_DC0_FOSC_2 | 6,
+ R61505_POWER_CONTROL3, R61505_POWER_CONTROL3_VCMR | 0x80 |
+ R61505_POWER_CONTROL3_PON |
+ R61505_POWER_CONTROL3_VRH(8),
+ R61505_POWER_CONTROL4, 0x1000 | R61505_POWER_CONTROL4_VDV(4),
+ R61505_POWER_CONTROL7, R61505_POWER_CONTROL7_VCM1(12),
+ R61505_POWER_CONTROL3, R61505_POWER_CONTROL3_VCMR | 0x80 |
+ R61505_POWER_CONTROL3_PSON |
+ R61505_POWER_CONTROL3_PON |
+ R61505_POWER_CONTROL3_VRH(8),
+};
+
+static const unsigned short magic1_data[] = {
+ R61505_GAMMA_CONTROL1, 0x0307,
+ R61505_GAMMA_CONTROL2, 0x0303,
+ R61505_GAMMA_CONTROL3, 0x0603,
+ R61505_GAMMA_CONTROL4, 0x0202,
+ R61505_GAMMA_CONTROL5, 0x0202,
+ R61505_GAMMA_CONTROL6, 0x0202,
+ R61505_GAMMA_CONTROL7, 0x1f1f,
+ R61505_GAMMA_CONTROL8, 0x0303,
+ R61505_GAMMA_CONTROL9, 0x0303,
+ R61505_GAMMA_CONTROL10, 0x0603,
+ R61505_GAMMA_CONTROL11, 0x0202,
+ R61505_GAMMA_CONTROL12, 0x0102,
+ R61505_GAMMA_CONTROL13, 0x0204,
+ R61505_GAMMA_CONTROL14, 0x0000,
+ R61505_DRIVER_OUTPUT_CONTROL, R61505_DRIVER_OUTPUT_CONTROL_SS,
+ R61505_LCD_WAVEFORM, R61505_LCD_WAVEFORM_BC0 |
+ R61505_LCD_WAVEFORM_EOR,
+ R61505_ENTRY_MODE, R61505_ENTRY_MODE_DFM |
+ R61505_ENTRY_MODE_BGR |
+ R61505_ENTRY_MODE_ID1 |
+ R61505_ENTRY_MODE_AM,
+ R61505_RAM_ADDR_HORZ, 239,
+ R61505_RAM_ADDR_VERT, 0,
+ R61505_RESIZE_CONTROL, R61505_RESIZE_CONTROL_RCV(0) |
+ R61505_RESIZE_CONTROL_RCH(0) |
+ R61505_RESIZE_CONTROL_RSZ_1,
+ R61505_DISPLAY_CONTROL3, R61505_DISPLAY_CONTROL3_PTS(0) |
+ R61505_DISPLAY_CONTROL3_PTG(0) |
+ R61505_DISPLAY_CONTROL3_ICS(0),
+ R61505_DISPLAY_CONTROL4, R61505_DISPLAY_CONTROL4_FMARKOE |
+ R61505_DISPLAY_CONTROL4_FMI_1,
+ R61505_EXT_DISPLAY_IF_CONTROL1, R61505_EXT_DISPLAY_IF_CONTROL1_ENC(0) |
+ R61505_EXT_DISPLAY_IF_CONTROL1_DM_ICLK |
+ R61505_EXT_DISPLAY_IF_CONTROL1_RIM_18,
+ R61505_FRAME_MARKER_CONTROL, R61505_FRAME_MARKER_CONTROL_FMP(0),
+ R61505_POWER_CONTROL5, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+ R61505_BASE_IMG_DISPLAY_CONTROL, R61505_BASE_IMG_DISPLAY_CONTROL_REV,
+ R61505_PANEL_IF_CONTROL2, R61505_PANEL_IF_CONTROL2_NOWI(1),
+ R61505_PANEL_IF_CONTROL3, R61505_PANEL_IF_CONTROL3_MCP(1),
+ R61505_DISPLAY_CONTROL1, R61505_DISPLAY_CONTROL1_GON |
+ R61505_DISPLAY_CONTROL1_D0,
+};
+
+static const unsigned short magic3_data[] = {
+ R61505_POWER_CONTROL1, R61505_POWER_CONTROL1_SAP |
+ R61505_POWER_CONTROL1_BT(6) |
+ R61505_POWER_CONTROL1_APE |
+ R61505_POWER_CONTROL1_AP_100,
+ R61505_POWER_CONTROL2, R61505_POWER_CONTROL2_DC1_FOSC_32 |
+ R61505_POWER_CONTROL2_DC0_FOSC_2 |
+ R61505_POWER_CONTROL2_VC_089,
+ R61505_DISPLAY_CONTROL1, R61505_DISPLAY_CONTROL1_VON |
+ R61505_DISPLAY_CONTROL1_GON |
+ R61505_DISPLAY_CONTROL1_D0,
+};
+
+static void r61505_enable_panel(struct r61505 *panel)
+{
+ unsigned long xres = panel->pdata->mode->xres;
+ unsigned long yres = panel->pdata->mode->yres;
+ unsigned int i;
+
+ r61505_write_array(panel, sync_data, ARRAY_SIZE(sync_data));
+
+ r61505_write(panel, R61505_OSCILLATION_CONTROL,
+ R61505_OSCILLATION_CONTROL_CALB);
+ usleep_range(10000, 11000);
+
+ r61505_write(panel, R61505_DRIVER_OUTPUT_CONTROL2,
+ R61505_DRIVER_OUTPUT_CONTROL2_NL((xres / 8) - 1));
+ r61505_write_array(panel, magic0_data, ARRAY_SIZE(magic0_data));
+ usleep_range(100000, 101000);
+
+ r61505_write_array(panel, magic1_data, ARRAY_SIZE(magic1_data));
+
+ r61505_write(panel, R61505_WINDOW_HORZ_START, 239 - (yres - 1));
+ r61505_write(panel, R61505_WINDOW_HORZ_END, 239);
+ r61505_write(panel, R61505_WINDOW_VERT_START, 0);
+ r61505_write(panel, R61505_WINDOW_VERT_END, xres - 1);
+
+ r61505_write_array(panel, magic2_data, ARRAY_SIZE(magic2_data));
+ usleep_range(10000, 11000);
+
+ r61505_write_array(panel, magic3_data, ARRAY_SIZE(magic3_data));
+ usleep_range(40000, 41000);
+
+ /* Clear GRAM to avoid displaying garbage. */
+ r61505_write(panel, R61505_RAM_ADDR_HORZ, 0);
+ r61505_write(panel, R61505_RAM_ADDR_VERT, 0);
+
+ for (i = 0; i < (xres * 256); i++) /* yes, 256 words per line */
+ r61505_write(panel, R61505_RAM_DATA, 0);
+
+ r61505_write(panel, R61505_RAM_ADDR_HORZ, 0);
+ r61505_write(panel, R61505_RAM_ADDR_VERT, 0);
+}
+
+static void r61505_disable_panel(struct r61505 *panel)
+{
+ r61505_reset(panel);
+}
+
+static void r61505_display_on(struct r61505 *panel)
+{
+ r61505_write(panel, R61505_DISPLAY_CONTROL1,
+ R61505_DISPLAY_CONTROL1_BASEE |
+ R61505_DISPLAY_CONTROL1_VON |
+ R61505_DISPLAY_CONTROL1_GON |
+ R61505_DISPLAY_CONTROL1_DTE |
+ R61505_DISPLAY_CONTROL1_D1 |
+ R61505_DISPLAY_CONTROL1_D0);
+ usleep_range(40000, 41000);
+}
+
+static void r61505_display_off(struct r61505 *panel)
+{
+ r61505_write(panel, R61505_DISPLAY_CONTROL1,
+ R61505_DISPLAY_CONTROL1_VON |
+ R61505_DISPLAY_CONTROL1_GON |
+ R61505_DISPLAY_CONTROL1_D0);
+}
+
+/* -----------------------------------------------------------------------------
+ * Panel operations
+ */
+
+static int r61505_enable(struct panel *p, enum panel_enable_mode enable)
+{
+ struct r61505 *panel = to_panel(p);
+
+ switch (enable) {
+ case PANEL_ENABLE_OFF:
+ r61505_disable_panel(panel);
+ break;
+
+ case PANEL_ENABLE_BLANK:
+ if (p->enable == PANEL_ENABLE_OFF)
+ r61505_enable_panel(panel);
+ else
+ r61505_display_off(panel);
+ break;
+
+ case PANEL_ENABLE_ON:
+ if (p->enable == PANEL_ENABLE_OFF)
+ r61505_enable_panel(panel);
+
+ r61505_display_on(panel);
+ break;
+ }
+
+ return 0;
+}
+
+static int r61505_start_transfer(struct panel *p)
+{
+ struct r61505 *panel = to_panel(p);
+
+ r61505_write_command(panel, R61505_RAM_DATA);
+ usleep_range(100000, 101000);
+
+ return 0;
+}
+
+static int r61505_get_modes(struct panel *p, const struct fb_videomode **modes)
+{
+ struct r61505 *panel = to_panel(p);
+
+ *modes = panel->pdata->mode;
+ return 1;
+}
+
+static const struct panel_ops r61505_ops = {
+ .enable = r61505_enable,
+ .start_transfer = r61505_start_transfer,
+ .get_modes = r61505_get_modes,
+};
+
+static void r61505_release(struct panel *p)
+{
+ struct r61505 *panel = to_panel(p);
+
+ kfree(panel);
+}
+
+static int r61505_remove(struct panel_dbi_device *dev)
+{
+ struct r61505 *panel = panel_dbi_get_drvdata(dev);
+
+ panel_dbi_set_drvdata(dev, NULL);
+ panel_unregister(&panel->panel);
+
+ return 0;
+}
+
+static int __devinit r61505_probe(struct panel_dbi_device *dev)
+{
+ const struct panel_r61505_platform_data *pdata = dev->dev.platform_data;
+ struct r61505 *panel;
+ int ret;
+
+ if (pdata == NULL)
+ return -ENODEV;
+
+ panel = kzalloc(sizeof(*panel), GFP_KERNEL);
+ if (panel == NULL)
+ return -ENOMEM;
+
+ panel->pdata = pdata;
+ panel->dbi = dev;
+
+ r61505_reset(panel);
+ r61505_write_array(panel, sync_data, ARRAY_SIZE(sync_data));
+
+ if (r61505_read(panel, 0) != R61505_DEVICE_CODE_VALUE) {
+ kfree(panel);
+ return -ENODEV;
+ }
+
+ panel->panel.dev = &dev->dev;
+ panel->panel.release = r61505_release;
+ panel->panel.ops = &r61505_ops;
+ panel->panel.width = pdata->width;
+ panel->panel.height = pdata->height;
+
+ ret = panel_register(&panel->panel);
+ if (ret < 0) {
+ kfree(panel);
+ return ret;
+ }
+
+ panel_dbi_set_drvdata(dev, panel);
+
+ return 0;
+}
+
+static const struct dev_pm_ops r61505_dev_pm_ops = {
+};
+
+static struct panel_dbi_driver r61505_driver = {
+ .probe = r61505_probe,
+ .remove = r61505_remove,
+ .driver = {
+ .name = "panel_r61505",
+ .owner = THIS_MODULE,
+ .pm = &r61505_dev_pm_ops,
+ },
+};
+
+module_panel_dbi_driver(r61505_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart at ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R61505-based Display Panel");
+MODULE_LICENSE("GPL");
diff --git a/include/video/panel-r61505.h b/include/video/panel-r61505.h
new file mode 100644
index 0000000..90b3d62
--- /dev/null
+++ b/include/video/panel-r61505.h
@@ -0,0 +1,27 @@
+/*
+ * Renesas R61505-based Display Panels
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PANEL_R61505_H__
+#define __PANEL_R61505_H__
+
+#include <linux/fb.h>
+#include <video/panel.h>
+
+struct panel_r61505_platform_data {
+ unsigned long width; /* Panel width in mm */
+ unsigned long height; /* Panel height in mm */
+ const struct fb_videomode *mode;
+
+ int reset; /* Reset GPIO */
+};
+
+#endif /* __PANEL_R61505_H__ */
--
1.7.8.6
More information about the dri-devel
mailing list