[RFC 5/5] video: panel: Add R61517 panel support
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Aug 16 17:49:43 PDT 2012
The R61517 is a MIPI DBI panel controller from Renesas.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
drivers/video/panel/Kconfig | 9 +
drivers/video/panel/Makefile | 1 +
drivers/video/panel/panel-r61517.c | 408 ++++++++++++++++++++++++++++++++++++
include/video/panel-r61517.h | 28 +++
4 files changed, 446 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/panel/panel-r61517.c
create mode 100644 include/video/panel-r61517.h
diff --git a/drivers/video/panel/Kconfig b/drivers/video/panel/Kconfig
index 12d7712..bd643be 100644
--- a/drivers/video/panel/Kconfig
+++ b/drivers/video/panel/Kconfig
@@ -25,4 +25,13 @@ config DISPLAY_PANEL_R61505
If you are in doubt, say N.
+config DISPLAY_PANEL_R61517
+ tristate "Renesas R61517-based Display Panel"
+ select DISPLAY_PANEL_DBI
+ ---help---
+ Support panels based on the Renesas R61517 panel controller.
+ Those panels are controlled through a MIPI DBI interface.
+
+ If you are in doubt, say N.
+
endif # DISPLAY_PANEL
diff --git a/drivers/video/panel/Makefile b/drivers/video/panel/Makefile
index e4fb9fe..3c11d26 100644
--- a/drivers/video/panel/Makefile
+++ b/drivers/video/panel/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_DISPLAY_PANEL) += panel.o
obj-$(CONFIG_DISPLAY_PANEL_DUMMY) += panel-dummy.o
obj-$(CONFIG_DISPLAY_PANEL_DBI) += panel-dbi.o
obj-$(CONFIG_DISPLAY_PANEL_R61505) += panel-r61505.o
+obj-$(CONFIG_DISPLAY_PANEL_R61517) += panel-r61517.o
diff --git a/drivers/video/panel/panel-r61517.c b/drivers/video/panel/panel-r61517.c
new file mode 100644
index 0000000..6e8d933
--- /dev/null
+++ b/drivers/video/panel/panel-r61517.c
@@ -0,0 +1,408 @@
+/*
+ * Renesas R61517-based Display Panels
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Based on KFR2R09 LCD panel support
+ * Copyright (C) 2009 Magnus Damm
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+
+#include <video/panel-dbi.h>
+#include <video/panel-r61517.h>
+
+struct r61517 {
+ struct panel panel;
+ struct panel_dbi_device *dbi;
+ const struct panel_r61517_platform_data *pdata;
+};
+
+#define to_panel(p) container_of(p, struct r61517, panel)
+
+/* -----------------------------------------------------------------------------
+ * Read, write and reset
+ */
+
+static void r61517_write_command(struct r61517 *panel, u16 reg)
+{
+ panel_dbi_write_command(panel->dbi, reg);
+}
+
+static void r61517_write_data(struct r61517 *panel, u16 data)
+{
+ panel_dbi_write_data(panel->dbi, data);
+}
+
+static void r61517_write(struct r61517 *panel, u16 reg, u16 data)
+{
+ panel_dbi_write_command(panel->dbi, reg);
+ panel_dbi_write_data(panel->dbi, data);
+}
+
+static u16 r61517_read_data(struct r61517 *panel)
+{
+ return panel_dbi_read_data(panel->dbi);
+}
+
+static void __r61517_write_array(struct r61517 *panel, const u8 *data,
+ unsigned int len)
+{
+ unsigned int i;
+
+ for (i = 0; i < len; ++i)
+ r61517_write_data(panel, data[i]);
+}
+
+#define r61517_write_array(p, a) \
+ __r61517_write_array(p, a, ARRAY_SIZE(a))
+
+static void r61517_reset(struct r61517 *panel)
+{
+ gpio_set_value(panel->pdata->protect, 0); /* PROTECT/ -> L */
+ gpio_set_value(panel->pdata->reset, 0); /* LCD_RST/ -> L */
+ gpio_set_value(panel->pdata->protect, 1); /* PROTECT/ -> H */
+ usleep_range(1100, 1200);
+ gpio_set_value(panel->pdata->reset, 1); /* LCD_RST/ -> H */
+ usleep_range(10, 100);
+ gpio_set_value(panel->pdata->protect, 0); /* PROTECT/ -> L */
+ msleep(20);
+}
+
+/* -----------------------------------------------------------------------------
+ * Configuration
+ */
+
+static const u8 data_frame_if[] = {
+ 0x02, /* WEMODE: 1=cont, 0=one-shot */
+ 0x00, 0x00,
+ 0x00, /* EPF, DFM */
+ 0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const u8 data_panel[] = {
+ 0x0b,
+ 0x63, /* 400 lines */
+ 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const u8 data_timing[] = {
+ 0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const u8 data_timing_src[] = {
+ 0x11, 0x01, 0x00, 0x01,
+};
+
+static const u8 data_gamma[] = {
+ 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
+ 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const u8 data_power[] = {
+ 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
+};
+
+static unsigned long r61517_read_device_code(struct r61517 *panel)
+{
+ /* access protect OFF */
+ r61517_write(panel, 0xb0, 0x00);
+
+ /* deep standby OFF */
+ r61517_write(panel, 0xb1, 0x00);
+
+ /* device code command */
+ r61517_write_command(panel, 0xbf);
+ mdelay(50);
+
+ /* dummy read */
+ r61517_read_data(panel);
+
+ /* read device code */
+ return ((r61517_read_data(panel) & 0xff) << 24) |
+ ((r61517_read_data(panel) & 0xff) << 16) |
+ ((r61517_read_data(panel) & 0xff) << 8) |
+ ((r61517_read_data(panel) & 0xff) << 0);
+}
+
+static void r61517_write_memory_start(struct r61517 *panel)
+{
+ r61517_write_command(panel, 0x2c);
+}
+
+static void r61517_clear_memory(struct r61517 *panel)
+{
+ unsigned int i;
+
+ r61517_write_memory_start(panel);
+
+ for (i = 0; i < (240 * 400); i++)
+ r61517_write_data(panel, 0);
+}
+
+static void r61517_enable_panel(struct r61517 *panel)
+{
+ /* access protect off */
+ r61517_write(panel, 0xb0, 0x00);
+
+ /* exit deep standby mode */
+ r61517_write(panel, 0xb1, 0x00);
+
+ /* frame memory I/F */
+ r61517_write_command(panel, 0xb3);
+ r61517_write_array(panel, data_frame_if);
+
+ /* display mode and frame memory write mode */
+ r61517_write(panel, 0xb4, 0x00); /* DBI, internal clock */
+
+ /* panel */
+ r61517_write_command(panel, 0xc0);
+ r61517_write_array(panel, data_panel);
+
+ /* timing (normal) */
+ r61517_write_command(panel, 0xc1);
+ r61517_write_array(panel, data_timing);
+
+ /* timing (partial) */
+ r61517_write_command(panel, 0xc2);
+ r61517_write_array(panel, data_timing);
+
+ /* timing (idle) */
+ r61517_write_command(panel, 0xc3);
+ r61517_write_array(panel, data_timing);
+
+ /* timing (source/VCOM/gate driving) */
+ r61517_write_command(panel, 0xc4);
+ r61517_write_array(panel, data_timing_src);
+
+ /* gamma (red) */
+ r61517_write_command(panel, 0xc8);
+ r61517_write_array(panel, data_gamma);
+
+ /* gamma (green) */
+ r61517_write_command(panel, 0xc9);
+ r61517_write_array(panel, data_gamma);
+
+ /* gamma (blue) */
+ r61517_write_command(panel, 0xca);
+ r61517_write_array(panel, data_gamma);
+
+ /* power (common) */
+ r61517_write_command(panel, 0xd0);
+ r61517_write_array(panel, data_power);
+
+ /* VCOM */
+ r61517_write_command(panel, 0xd1);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0x0f);
+ r61517_write_data(panel, 0x02);
+
+ /* power (normal) */
+ r61517_write_command(panel, 0xd2);
+ r61517_write_data(panel, 0x63);
+ r61517_write_data(panel, 0x24);
+
+ /* power (partial) */
+ r61517_write_command(panel, 0xd3);
+ r61517_write_data(panel, 0x63);
+ r61517_write_data(panel, 0x24);
+
+ /* power (idle) */
+ r61517_write_command(panel, 0xd4);
+ r61517_write_data(panel, 0x63);
+ r61517_write_data(panel, 0x24);
+
+ r61517_write_command(panel, 0xd8);
+ r61517_write_data(panel, 0x77);
+ r61517_write_data(panel, 0x77);
+
+ /* TE signal */
+ r61517_write(panel, 0x35, 0x00);
+
+ /* TE signal line */
+ r61517_write_command(panel, 0x44);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0x00);
+
+ /* column address */
+ r61517_write_command(panel, 0x2a);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0xef);
+
+ /* page address */
+ r61517_write_command(panel, 0x2b);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0x00);
+ r61517_write_data(panel, 0x01);
+ r61517_write_data(panel, 0x8f);
+
+ /* exit sleep mode */
+ r61517_write_command(panel, 0x11);
+
+ mdelay(120);
+
+ /* clear vram */
+ r61517_clear_memory(panel);
+}
+
+static void r61517_disable_panel(struct r61517 *panel)
+{
+ r61517_reset(panel);
+}
+
+static void r61517_display_on(struct r61517 *panel)
+{
+ r61517_write_command(panel, 0x29);
+ mdelay(1);
+}
+
+static void r61517_display_off(struct r61517 *panel)
+{
+ r61517_write_command(panel, 0x28);
+}
+
+/* -----------------------------------------------------------------------------
+ * Panel operations
+ */
+
+static int r61517_enable(struct panel *p, enum panel_enable_mode enable)
+{
+ struct r61517 *panel = to_panel(p);
+
+ switch (enable) {
+ case PANEL_ENABLE_OFF:
+ r61517_disable_panel(panel);
+ break;
+
+ case PANEL_ENABLE_BLANK:
+ if (p->enable == PANEL_ENABLE_OFF)
+ r61517_enable_panel(panel);
+ else
+ r61517_display_off(panel);
+ break;
+
+ case PANEL_ENABLE_ON:
+ if (p->enable == PANEL_ENABLE_OFF)
+ r61517_enable_panel(panel);
+
+ r61517_display_on(panel);
+ break;
+ }
+
+ return 0;
+}
+
+static int r61517_start_transfer(struct panel *p)
+{
+ struct r61517 *panel = to_panel(p);
+
+ r61517_write_memory_start(panel);
+ return 0;
+}
+
+static int r61517_get_modes(struct panel *p, const struct fb_videomode **modes)
+{
+ struct r61517 *panel = to_panel(p);
+
+ *modes = panel->pdata->mode;
+ return 1;
+}
+
+static const struct panel_ops r61517_ops = {
+ .enable = r61517_enable,
+ .start_transfer = r61517_start_transfer,
+ .get_modes = r61517_get_modes,
+};
+
+static void r61517_release(struct panel *p)
+{
+ struct r61517 *panel = to_panel(p);
+
+ kfree(panel);
+}
+
+static int r61517_remove(struct panel_dbi_device *dev)
+{
+ struct r61517 *panel = panel_dbi_get_drvdata(dev);
+
+ panel_dbi_set_drvdata(dev, NULL);
+ panel_unregister(&panel->panel);
+
+ return 0;
+}
+
+static int __devinit r61517_probe(struct panel_dbi_device *dev)
+{
+ const struct panel_r61517_platform_data *pdata = dev->dev.platform_data;
+ struct r61517 *panel;
+ int ret;
+
+ if (pdata == NULL)
+ return -ENODEV;
+
+ panel = kzalloc(sizeof(*panel), GFP_KERNEL);
+ if (panel == NULL)
+ return -ENOMEM;
+
+ panel->pdata = pdata;
+ panel->dbi = dev;
+
+ r61517_reset(panel);
+
+ if (r61517_read_device_code(panel) != 0x01221517) {
+ kfree(panel);
+ return -ENODEV;
+ }
+
+ pr_info("R61517 panel controller detected.\n");
+
+ panel->panel.dev = &dev->dev;
+ panel->panel.release = r61517_release;
+ panel->panel.ops = &r61517_ops;
+ panel->panel.width = pdata->width;
+ panel->panel.height = pdata->height;
+
+ ret = panel_register(&panel->panel);
+ if (ret < 0) {
+ kfree(panel);
+ return ret;
+ }
+
+ panel_dbi_set_drvdata(dev, panel);
+
+ return 0;
+}
+
+static const struct dev_pm_ops r61517_dev_pm_ops = {
+};
+
+static struct panel_dbi_driver r61517_driver = {
+ .probe = r61517_probe,
+ .remove = r61517_remove,
+ .driver = {
+ .name = "panel_r61517",
+ .owner = THIS_MODULE,
+ .pm = &r61517_dev_pm_ops,
+ },
+};
+
+module_panel_dbi_driver(r61517_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart at ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R61517-based Display Panel");
+MODULE_LICENSE("GPL");
diff --git a/include/video/panel-r61517.h b/include/video/panel-r61517.h
new file mode 100644
index 0000000..c9e6ddf
--- /dev/null
+++ b/include/video/panel-r61517.h
@@ -0,0 +1,28 @@
+/*
+ * Renesas R61517-based Display Panels
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PANEL_R61517_H__
+#define __PANEL_R61517_H__
+
+#include <linux/fb.h>
+#include <video/panel.h>
+
+struct panel_r61517_platform_data {
+ unsigned long width; /* Panel width in mm */
+ unsigned long height; /* Panel height in mm */
+ const struct fb_videomode *mode;
+
+ int protect; /* Protect GPIO */
+ int reset; /* Reset GPIO */
+};
+
+#endif /* __PANEL_R61517_H__ */
--
1.7.8.6
More information about the dri-devel
mailing list