gma500 suspend to ram fails (3.4)
Mattia Dongili
malattia at linux.it
Sun Jun 17 03:03:43 PDT 2012
Hi,
I just switched from an ancient installation of emgd on a vaio X11 to
the mainstream gma500_gfx driver.
One issue I have on 3.4 is that suspend to ram fails in
psb_save_display_registers. I could only take a picture of the oops but
it's quite incomplete:
http://kamineko.org/oops/2012-06-17%2018.32.17.jpg
3.5-rc2 is not quite usable, I get a pile of warnings for
DRM_OBJECT_MAX_PROPERTY being too small and in the end I don't get
neither a console nor X.
here's attached a 3.4 boot dmesg, I'll recompile 3.5 soon to get started
with that too.
Is there anything else I can provide to help debug this?
Thanks!
--
mattia
:wq!
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0+ (mattia at ludwig) (gcc version 4.7.0 (Debian 4.7.1-1) ) #28 SMP PREEMPT Sat Jun 16 17:25:13 JST 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f64d000 (usable)
[ 0.000000] BIOS-e820: 000000007f64d000 - 000000007f64e000 (reserved)
[ 0.000000] BIOS-e820: 000000007f64e000 - 000000007f656000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f656000 - 000000007f69f000 (reserved)
[ 0.000000] BIOS-e820: 000000007f69f000 - 000000007f6a2000 (usable)
[ 0.000000] BIOS-e820: 000000007f6a2000 - 000000007f6df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f6ef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6ef000 - 000000007f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6f0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed4c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Sony Corporation VPCX11AKJ/VAIO, BIOS R0082U4 10/13/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask 080000000 write-back
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 base 07F6F0000 mask 0FFFF0000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000007f6f0000 - 000000007f700000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 7f6ee120 00064 (v01 Sony VAIO 20091013 01000013)
[ 0.000000] ACPI: FACP 7f6ed000 000F4 (v03 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20120320/tbfadt-629)
[ 0.000000] ACPI: DSDT 7f6e2000 0582B (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: FACS 7f6a6000 00040
[ 0.000000] ACPI: HPET 7f6ec000 00038 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: APIC 7f6eb000 00068 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: MCFG 7f6ea000 0003C (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: SLIC 7f6e9000 00176 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: ASF! 7f6e8000 000A5 (v32 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: BOOT 7f6e1000 00028 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: SSDT 7f6df000 004CE (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f64d
[ 0.000000] 0: 0x0007f69f -> 0x0007f6a2
[ 0.000000] 0: 0x0007f6ef -> 0x0007f6f0
[ 0.000000] On node 0 totalpages: 521696
[ 0.000000] free_area_init_node: node 0, pgdat c139d780, node_mem_map f680d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292181 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f67e9000 s25280 r0 d23872 u49152
[ 0.000000] pcpu-alloc: s25280 r0 d23872 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517618
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0+ root=/dev/sda1 ro no_console_suspend acpi_backlight=vendor resume=/dev/sda2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6f0)
[ 0.000000] Memory: 2065060k/2087872k available (2621k kernel code, 21724k reserved, 1103k data, 336k init, 1177932k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13a4000 - 0xc13f8000 ( 336 kB)
[ 0.000000] .data : 0xc128f643 - 0xc13a3480 (1103 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128f643 (2621 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 1999.932 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.86 BogoMIPS (lpj=7999728)
[ 0.004171] pid_max: default: 32768 minimum: 301
[ 0.004344] Security Framework initialized
[ 0.004453] Mount-cache hash table entries: 512
[ 0.004859] Initializing cgroup subsys cpuacct
[ 0.004941] Initializing cgroup subsys devices
[ 0.005022] Initializing cgroup subsys freezer
[ 0.005103] Initializing cgroup subsys blkio
[ 0.005230] Disabled fast string operations
[ 0.005312] CPU: Physical Processor ID: 0
[ 0.005386] CPU: Processor Core ID: 0
[ 0.005463] mce: CPU supports 5 MCE banks
[ 0.005549] CPU0: Thermal monitoring enabled (TM2)
[ 0.005634] using mwait in idle threads.
[ 0.005755] ACPI: Core revision 20120320
[ 0.016140] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020242] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060025] CPU0: Intel(R) Atom(TM) CPU Z550 @ 2.00GHz stepping 02
[ 0.064003] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.064003] ... version: 3
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.088099] CPU 1 irqstacks, hard=f609c000 soft=f609e000
[ 0.088112] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.100051] Brought up 2 CPUs
[ 0.100278] Total of 2 processors activated (7999.72 BogoMIPS).
[ 0.100764] PM: Registering ACPI NVS region [mem 0x7f64e000-0x7f655fff] (32768 bytes)
[ 0.100764] PM: Registering ACPI NVS region [mem 0x7f6a2000-0x7f6defff] (249856 bytes)
[ 0.100764] NET: Registered protocol family 16
[ 0.100864] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100970] ACPI: bus type pci registered
[ 0.101098] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.101217] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.101305] PCI: Using MMCONFIG for extended config space
[ 0.101392] PCI: Using configuration type 1 for base access
[ 0.104203] bio: create slab <bio-0> at 0
[ 0.104341] ACPI: Added _OSI(Module Device)
[ 0.104341] ACPI: Added _OSI(Processor Device)
[ 0.104341] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.104356] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.108338] ACPI: EC: Look up EC in DSDT
[ 0.111611] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.126530] ACPI: SSDT 7f658c10 0027B (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.127539] ACPI: Dynamic OEM Table Load:
[ 0.127714] ACPI: SSDT (null) 0027B (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.128218] ACPI: SSDT 7f657690 0061C (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.129180] ACPI: Dynamic OEM Table Load:
[ 0.129348] ACPI: SSDT (null) 0061C (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.132671] ACPI: SSDT 7f658f10 000D0 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.133657] ACPI: Dynamic OEM Table Load:
[ 0.133832] ACPI: SSDT (null) 000D0 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.134233] ACPI: SSDT 7f656f10 00083 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.136551] ACPI: Dynamic OEM Table Load:
[ 0.136726] ACPI: SSDT (null) 00083 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.136961] ACPI: Interpreter enabled
[ 0.136961] ACPI: (supports S0 S3 S4 S5)
[ 0.136961] ACPI: Using IOAPIC for interrupt routing
[ 0.147377] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
[ 0.147793] ACPI: No dock devices found.
[ 0.147882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.148407] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.149117] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.149201] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.149293] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.149405] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0x7fffffff]
[ 0.149515] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.149627] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
[ 0.149739] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.149849] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.150043] PCI host bridge to bus 0000:00
[ 0.150124] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.150204] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.150293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.150383] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff]
[ 0.150474] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.150565] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.150655] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.150746] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.150852] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000
[ 0.150944] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000
[ 0.150972] pci 0000:00:02.0: reg 10: [mem 0x94200000-0x9427ffff]
[ 0.150987] pci 0000:00:02.0: reg 14: [io 0x6070-0x6077]
[ 0.151001] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff]
[ 0.151016] pci 0000:00:02.0: reg 1c: [mem 0x94280000-0x942bffff]
[ 0.151151] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300
[ 0.151174] pci 0000:00:1b.0: reg 10: [mem 0x942c0000-0x942c3fff 64bit]
[ 0.151257] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.151293] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400
[ 0.151382] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.151416] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400
[ 0.151505] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.151543] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300
[ 0.151593] pci 0000:00:1d.0: reg 20: [io 0x6040-0x605f]
[ 0.151637] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300
[ 0.152032] pci 0000:00:1d.1: reg 20: [io 0x6020-0x603f]
[ 0.152080] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300
[ 0.152130] pci 0000:00:1d.2: reg 20: [io 0x6000-0x601f]
[ 0.152190] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320
[ 0.152223] pci 0000:00:1d.7: reg 10: [mem 0x00000000-0x000003ff]
[ 0.152355] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152389] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100
[ 0.152475] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180
[ 0.152523] pci 0000:00:1f.1: reg 20: [io 0x6060-0x606f]
[ 0.152638] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[ 0.152670] pci 0000:01:00.0: reg 10: [mem 0x93100000-0x9310ffff 64bit]
[ 0.152801] pci 0000:01:00.0: supports D1
[ 0.152806] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.160061] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.160167] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.160186] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x941fffff]
[ 0.160205] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff pref]
[ 0.160345] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.160378] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit]
[ 0.160396] pci 0000:02:00.0: reg 18: [io 0x3000-0x30ff]
[ 0.160450] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.160536] pci 0000:02:00.0: supports D1 D2
[ 0.160541] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168058] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.168163] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.168181] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x930fffff]
[ 0.168200] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff pref]
[ 0.168234] pci_bus 0000:00: on NUMA node 0
[ 0.168254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.168674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.168834] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.168926] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.169042] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.174151] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12)
[ 0.174807] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12)
[ 0.175457] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.176127] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.176778] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.177433] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178091] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178741] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.179422] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.179551] vgaarb: loaded
[ 0.179628] vgaarb: bridge control possible 0000:00:02.0
[ 0.179948] SCSI subsystem initialized
[ 0.180058] libata version 3.00 loaded.
[ 0.180133] PCI: Using ACPI for IRQ routing
[ 0.188891] PCI: pci_cache_line_size set to 64 bytes
[ 0.188988] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.188995] reserve RAM buffer: 000000007f64d000 - 000000007fffffff
[ 0.189002] reserve RAM buffer: 000000007f6a2000 - 000000007fffffff
[ 0.189008] reserve RAM buffer: 000000007f6f0000 - 000000007fffffff
[ 0.189350] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.189445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.189713] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.196037] Switching to clocksource hpet
[ 0.196358] pnp: PnP ACPI init
[ 0.196459] ACPI: bus type pnp registered
[ 0.197322] pnp 00:00: [bus 00-ff]
[ 0.197330] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.197335] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.197341] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.197346] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.197352] pnp 00:00: [mem 0x7f800000-0x7fffffff window]
[ 0.197358] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.197363] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.197369] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.197374] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.197496] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.197691] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.197697] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.197703] pnp 00:01: [mem 0x40000000-0x7fffffff]
[ 0.197708] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.197713] pnp 00:01: [mem 0xfed40000-0xfed4bfff]
[ 0.197718] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.197724] pnp 00:01: [mem 0xffc00000-0xffc3ffff]
[ 0.197822] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.197912] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.197996] system 00:01: [mem 0x40000000-0x7fffffff] could not be reserved
[ 0.198088] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.198180] system 00:01: [mem 0xfed40000-0xfed4bfff] has been reserved
[ 0.198270] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.198361] system 00:01: [mem 0xffc00000-0xffc3ffff] has been reserved
[ 0.198454] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198882] pnp 00:02: Plug and Play ACPI device, IDs SNY6001 (disabled)
[ 0.198908] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.198989] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.199061] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.199176] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.199270] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.199308] pnp 00:05: [io 0x0070-0x0077]
[ 0.199329] pnp 00:05: [irq 8]
[ 0.199414] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.199447] pnp 00:06: [io 0x002e-0x002f]
[ 0.199452] pnp 00:06: [io 0x004e-0x004f]
[ 0.199457] pnp 00:06: [io 0x0061]
[ 0.199462] pnp 00:06: [io 0x0063]
[ 0.199466] pnp 00:06: [io 0x0065]
[ 0.199471] pnp 00:06: [io 0x0067]
[ 0.199476] pnp 00:06: [io 0x0080-0x0083]
[ 0.199480] pnp 00:06: [io 0x0092]
[ 0.199485] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.199490] pnp 00:06: [io 0x2000]
[ 0.199494] pnp 00:06: [io 0x2004]
[ 0.199499] pnp 00:06: [io 0x0820-0x0823]
[ 0.199504] pnp 00:06: [io 0x0000]
[ 0.199509] pnp 00:06: [io 0x0084-0x008f]
[ 0.199514] pnp 00:06: [io 0x0374-0x0375]
[ 0.199518] pnp 00:06: [io 0x0377]
[ 0.199523] pnp 00:06: [io 0x03f4-0x03f5]
[ 0.199528] pnp 00:06: [io 0x03f7]
[ 0.199532] pnp 00:06: [io 0x0400-0x040f]
[ 0.199540] pnp 00:06: [io 0x0410-0x041f]
[ 0.199545] pnp 00:06: [io 0x0600-0x063f]
[ 0.199550] pnp 00:06: [io 0x0500-0x055f]
[ 0.199555] pnp 00:06: [io 0x1040-0x107f]
[ 0.199690] system 00:06: [io 0x2000] has been reserved
[ 0.199774] system 00:06: [io 0x2004] has been reserved
[ 0.199855] system 00:06: [io 0x0820-0x0823] has been reserved
[ 0.199949] system 00:06: [io 0x0374-0x0375] has been reserved
[ 0.200048] system 00:06: [io 0x0377] has been reserved
[ 0.200135] system 00:06: [io 0x03f4-0x03f5] has been reserved
[ 0.200223] system 00:06: [io 0x03f7] has been reserved
[ 0.200309] system 00:06: [io 0x0400-0x040f] has been reserved
[ 0.200398] system 00:06: [io 0x0410-0x041f] has been reserved
[ 0.200487] system 00:06: [io 0x0600-0x063f] has been reserved
[ 0.200575] system 00:06: [io 0x0500-0x055f] has been reserved
[ 0.200664] system 00:06: [io 0x1040-0x107f] has been reserved
[ 0.200752] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.200788] pnp 00:07: [io 0x0060]
[ 0.200793] pnp 00:07: [io 0x0064]
[ 0.200805] pnp 00:07: [irq 1]
[ 0.200896] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.200926] pnp 00:08: [irq 12]
[ 0.201015] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
[ 0.201055] pnp: PnP ACPI: found 9 devices
[ 0.201136] ACPI: ACPI bus type pnp unregistered
[ 0.238442] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.238592] pci 0000:00:1d.7: BAR 0: assigned [mem 0x942c4000-0x942c43ff]
[ 0.238688] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.238772] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.238856] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x941fffff]
[ 0.238946] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff pref]
[ 0.239067] pci 0000:02:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref]
[ 0.239181] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.239268] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.239359] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x930fffff]
[ 0.239452] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff pref]
[ 0.239614] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.239620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.239626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239632] pci_bus 0000:00: resource 7 [mem 0x7f800000-0x7fffffff]
[ 0.239638] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.239643] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000effff]
[ 0.239649] pci_bus 0000:00: resource 10 [mem 0x000f0000-0x000fffff]
[ 0.239655] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
[ 0.239661] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.239667] pci_bus 0000:01: resource 1 [mem 0x93100000-0x941fffff]
[ 0.239672] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff pref]
[ 0.239679] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.239684] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
[ 0.239690] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff pref]
[ 0.239879] NET: Registered protocol family 2
[ 0.240093] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.240624] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.241832] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.242577] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.242668] TCP: reno registered
[ 0.242751] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.242853] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243242] NET: Registered protocol family 1
[ 0.243369] pci 0000:00:02.0: Boot video device
[ 0.243522] pci 0000:00:1d.7: enabling device (0000 -> 0002)
[ 1.840076] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.840353] PCI: CLS 0 bytes, default 64
[ 1.840534] Simple Boot Flag at 0x44 set to 0x1
[ 1.841304] audit: initializing netlink socket (disabled)
[ 1.841406] type=2000 audit(1339927150.840:1): initialized
[ 1.842018] highmem bounce pool size: 64 pages
[ 1.842338] VFS: Disk quotas dquot_6.5.2
[ 1.842464] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.843078] msgmni has been set to 1732
[ 1.843524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.843630] io scheduler noop registered
[ 1.843703] io scheduler deadline registered
[ 1.843824] io scheduler cfq registered (default)
[ 1.844375] intel_idle: MWAIT substates: 0x3020220
[ 1.844391] intel_idle: v0.4 model 0x1C
[ 1.844396] intel_idle: lapic_timer_reliable_states 0x2
[ 1.844401] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.844579] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.845568] pata_sch 0000:00:1f.1: version 0.2
[ 1.845648] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 1.846286] scsi0 : pata_sch
[ 1.846581] scsi1 : pata_sch
[ 1.847246] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6060 irq 14
[ 1.847331] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6068 irq 15
[ 1.847480] sky2: driver version 1.30
[ 1.847683] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.847891] sky2 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1.848312] sky2 0000:02:00.0: eth0: addr 00:1d:ba:be:2e:a7
[ 1.848504] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.851573] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.851714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.851940] mousedev: PS/2 mouse device common for all mice
[ 1.852363] cpuidle: using governor ladder
[ 1.852590] cpuidle: using governor menu
[ 1.853058] TCP: cubic registered
[ 1.853284] NET: Registered protocol family 10
[ 1.853859] NET: Registered protocol family 17
[ 1.853943] Registering the dns_resolver key type
[ 1.854130] Using IPI No-Shortcut mode
[ 1.854333] PM: Checking hibernation image partition /dev/sda2
[ 1.866722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.008583] ata1.00: ATA-7: SAMSUNG MMCRE28GFMXP-MVB, VBM1AS1Q, max UDMA/100
[ 2.008669] ata1.00: 250069680 sectors, multi 16: LBA48
[ 2.016542] ata1.00: configured for UDMA/100
[ 2.016887] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCRE28G VBM1 PQ: 0 ANSI: 5
[ 2.017355] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.017663] sd 0:0:0:0: [sda] Write Protect is off
[ 2.017742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.017825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.018911] sda: sda1 sda2 sda3
[ 2.019744] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.782989] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.796185] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 2.798850] PM: Hibernation image partition 8:2 present
[ 2.798864] PM: Looking for hibernation image.
[ 2.799524] PM: Image not found (code -22)
[ 2.799535] PM: Hibernation image not present or could not be loaded.
[ 2.799568] registered taskstats version 1
[ 2.803168] kjournald starting. Commit interval 5 seconds
[ 2.803275] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.803300] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 2.803488] Freeing unused kernel memory: 336k freed
[ 2.803869] Write protecting the kernel text: 2624k
[ 2.804001] Write protecting the kernel read-only data: 908k
[ 3.560562] ACPI: Requesting acpi_cpufreq
[ 3.612239] ACPI: AC Adapter [AC] (on-line)
[ 3.614365] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 3.615068] ACPI: Lid Switch [LID0]
[ 3.637388] usbcore: registered new interface driver usbfs
[ 3.637546] usbcore: registered new interface driver hub
[ 3.640129] ACPI: Battery Slot [BAT0] (battery present)
[ 3.640540] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 3.640678] ACPI: Power Button [PWRB]
[ 3.642696] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.642838] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.645308] usbcore: registered new device driver usb
[ 3.652108] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.652208] ACPI: Thermal Zone [ATF0] (46 C)
[ 3.653463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.653573] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.653581] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.653597] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.653680] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.659932] Linux agpgart interface v0.103
[ 3.679062] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.679123] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x942c4000
[ 3.686211] [drm] Initialized drm 1.1.0 20060810
[ 3.690058] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.699641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.699751] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.699870] usb usb1: Product: EHCI Host Controller
[ 3.699956] usb usb1: Manufacturer: Linux 3.4.0+ ehci_hcd
[ 3.700518] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.701299] hub 1-0:1.0: USB hub found
[ 3.701535] hub 1-0:1.0: 8 ports detected
[ 3.703929] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.704228] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.704239] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.704338] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.704530] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00006040
[ 3.704720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.704812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.705202] usb usb2: Product: UHCI Host Controller
[ 3.705291] usb usb2: Manufacturer: Linux 3.4.0+ uhci_hcd
[ 3.705378] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.705740] hub 2-0:1.0: USB hub found
[ 3.705833] hub 2-0:1.0: 2 ports detected
[ 3.706237] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.706248] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.706353] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.706547] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006020
[ 3.706737] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.706831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.706949] usb usb3: Product: UHCI Host Controller
[ 3.707035] usb usb3: Manufacturer: Linux 3.4.0+ uhci_hcd
[ 3.707124] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.707895] hub 3-0:1.0: USB hub found
[ 3.707999] hub 3-0:1.0: 2 ports detected
[ 3.708661] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.708673] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.708777] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.708970] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00006000
[ 3.718022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.718128] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.721884] usb usb4: Product: UHCI Host Controller
[ 3.721985] usb usb4: Manufacturer: Linux 3.4.0+ uhci_hcd
[ 3.722193] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.723233] cfg80211: Calling CRDA to update world regulatory domain
[ 3.725144] hub 4-0:1.0: USB hub found
[ 3.725256] hub 4-0:1.0: 2 ports detected
[ 3.739213] gma500 0000:00:02.0: setting latency timer to 64
[ 3.750007] Stolen memory information
[ 3.750094] base in RAM: 0x7f800000
[ 3.750175] size: 7932K, calculated by (GTT RAM base) - (Stolen base), seems wrong
[ 3.750287] the correct size should be: 8M(dvmt mode=3)
[ 3.771708] sony_laptop: Sony Notebook Control Driver v0.6
[ 3.778699] Set up 1983 stolen pages starting at 0x7f800000, GTT offset 0K
[ 3.778988] [drm] SGX core id = 0x01130000
[ 3.779072] [drm] SGX core rev major = 0x01, minor = 0x02
[ 3.779156] [drm] SGX core rev maintenance = 0x01, designer = 0x00
[ 3.780316] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:21/SNY5001:00/input/input6
[ 3.780636] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:21/SNY5001:00/input/input7
[ 3.792094] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.792194] [drm] No driver support for vblank timestamp query.
[ 3.820623] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 3.836620] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x217
[ 4.010880] ath: EEPROM regdomain: 0x65
[ 4.010889] ath: EEPROM indicates we should expect a direct regpair map
[ 4.010898] ath: Country alpha2 being used: 00
[ 4.010903] ath: Regpair used: 0x65
[ 4.012105] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 4.037352] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 4.038019] Registered led device: ath9k-phy0
[ 4.038068] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8180000, irq=16
[ 4.146049] usb 1-5: config 1 has an invalid interface number: 1 but max is 0
[ 4.146163] usb 1-5: config 1 has no interface number 0
[ 4.148164] usb 1-5: New USB device found, idVendor=05c6, idProduct=9224
[ 4.148270] usb 1-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 4.148369] usb 1-5: Product: Qualcomm Gobi 2000
[ 4.148520] usb 1-5: Manufacturer: Qualcomm Incorporated
[ 4.194764] cfg80211: World regulatory domain updated:
[ 4.194859] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.194976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.195088] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.195200] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.195315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.195432] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.205739] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x217
[ 4.255756] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 4.260068] usb 1-8: new high-speed USB device number 3 using ehci_hcd
[ 4.396443] usb 1-8: New USB device found, idVendor=05ca, idProduct=18b6
[ 4.396580] usb 1-8: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 4.396704] usb 1-8: Manufacturer: Ricoh co. Ltd.
[ 4.474597] usbcore: registered new interface driver usbserial
[ 4.475305] usbcore: registered new interface driver usbserial_generic
[ 4.476071] USB Serial support registered for generic
[ 4.476232] usbserial: USB Serial Driver core
[ 4.481451] usbcore: registered new interface driver qcserial
[ 4.482287] USB Serial support registered for Qualcomm USB modem
[ 4.483027] qcserial 1-5:1.1: Qualcomm USB modem converter detected
[ 4.484196] usb 1-5: Qualcomm USB modem converter now attached to ttyUSB0
[ 4.488177] Linux video capture interface: v2.00
[ 4.494208] uvcvideo: Unable to create debugfs directory
[ 4.494422] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b6)
[ 4.497739] input: UVC Camera (05ca:18b6) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 4.498077] usbcore: registered new interface driver uvcvideo
[ 4.498168] USB Video Class driver (1.1.1)
[ 5.303774] gma500 0000:00:02.0: allocated 1366x768 fb
[ 5.303981] fbcon: psbfb (fb0) is primary device
[ 5.644684] Console: switching to colour frame buffer device 170x48
[ 5.655496] fb0: psbfb frame buffer device
[ 5.655571] drm: registered panic notifier
[ 5.655743] gma500 0000:00:02.0: Backlight lvds set brightness 74407440
[ 5.655903] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 5.656284] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 5.656567] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.656870] lpc_sch: probe of 0000:00:1f.0 failed with error -16
[ 5.676435] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.676597] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.732230] hda_codec: ALC262: SKU not ready 0x411111f0
[ 5.734660] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 5.737769] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.801678] Adding 4883756k swap on /dev/sda2. Priority:-1 extents:1 across:4883756k SS
[ 7.045086] EXT3-fs (sda1): using internal journal
[ 7.290963] loop: module loaded
[ 8.948321] kjournald starting. Commit interval 5 seconds
[ 8.954521] EXT3-fs (sda3): using internal journal
[ 8.958766] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 10.267043] RPC: Registered named UNIX socket transport module.
[ 10.273375] RPC: Registered udp transport module.
[ 10.277630] RPC: Registered tcp transport module.
[ 10.281752] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.311705] NFS: Registering the id_resolver key type
[ 10.330211] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 13.682997] Bluetooth: Core ver 2.16
[ 13.689366] NET: Registered protocol family 31
[ 13.695323] Bluetooth: HCI device and connection manager initialized
[ 13.701198] Bluetooth: HCI socket layer initialized
[ 13.706950] Bluetooth: L2CAP socket layer initialized
[ 13.712149] Bluetooth: SCO socket layer initialized
[ 13.749405] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.749411] Bluetooth: BNEP filters: protocol multicast
[ 13.754263] Bluetooth: RFCOMM TTY layer initialized
[ 13.754274] Bluetooth: RFCOMM socket layer initialized
[ 13.754279] Bluetooth: RFCOMM ver 1.11
[ 14.734426] gma500 0000:00:02.0: Backlight lvds set brightness 74407440
[ 15.404870] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.126206] gma500 0000:00:02.0: Backlight lvds set brightness 74407440
[ 19.222173] colord[3031]: segfault at 8 ip 08052674 sp bf9e4980 error 4 in colord[8048000+20000]
[ 21.096875] sky2 0000:02:00.0: eth0: enabling interface
[ 21.097565] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.826359] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.213794] sky2 0000:02:00.0: eth0: disabling interface
[ 25.226725] sky2 0000:02:00.0: eth0: enabling interface
[ 25.227520] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.832242] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.869543] wlan0: authenticate with 00:3a:9d:72:7d:66
[ 28.876046] wlan0: send auth to 00:3a:9d:72:7d:66 (try 1/3)
[ 28.878055] wlan0: authenticated
[ 28.888040] wlan0: associate with 00:3a:9d:72:7d:66 (try 1/3)
[ 28.892186] wlan0: RX AssocResp from 00:3a:9d:72:7d:66 (capab=0x31 status=0 aid=1)
[ 28.892206] wlan0: associated
[ 28.899077] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 39.504089] wlan0: no IPv6 routers present
More information about the dri-devel
mailing list