[PATCH 07/12] drm/i915/hdmi: Port the infoframe code to the common hdmi helpers

Damien Lespiau damien.lespiau at intel.com
Tue Aug 6 12:32:19 PDT 2013


Let's use the drivers/video/hmdi.c and drm infoframe helpers to build
our infoframes.

v2: Simplify the logic to compute the buffer size. We can just take the
maximum infoframe size rounded to 32, which happens to be what the
hardware let us write anyway.

v3: Remove unnecessary memset() (Ville Syrjälä)

Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 82 +++++++++++++++++++++++++++------------
 1 file changed, 58 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index ee67e23..455dfa7 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -325,14 +325,43 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
 	POSTING_READ(ctl_reg);
 }
 
+/*
+ * The data we write to the DIP data buffer registers is 1 byte bigger than the
+ * HDMI infoframe size because of an ECC/reserved byte at position 3 (starting
+ * at 0). It's also a byte used by DisplayPort so the same DIP registers can be
+ * used for both technologies.
+ *
+ * DW0: Reserved/ECC/DP | HB2 | HB1 | HB0
+ * DW1:       DB3       | DB2 | DB1 | DB0
+ * DW2:       DB7       | DB6 | DB5 | DB4
+ * DW3: ...
+ *
+ * (HB is Header Byte, DB is Data Byte)
+ *
+ * The hdmi pack() functions don't know about that hardware specific hole so we
+ * trick them by giving an offset into the buffer and moving back the header
+ * bytes by one.
+ */
 static void intel_set_infoframe(struct drm_encoder *encoder,
-				struct dip_infoframe *frame)
+				union hdmi_infoframe *frame)
 {
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	uint8_t buffer[VIDEO_DIP_DATA_SIZE];
+	ssize_t len;
 
-	intel_dip_infoframe_csum(frame);
-	intel_hdmi->write_infoframe(encoder, frame->type, (uint8_t *)frame,
-				    DIP_HEADER_SIZE + frame->len);
+	/* see comment above for the reason for this offset */
+	len = hdmi_infoframe_pack(frame, buffer + 1, sizeof(buffer) - 1);
+	if (len < 0)
+		return;
+
+	/* Insert the 'hole' (see big comment above) at position 3 */
+	buffer[0] = buffer[1];
+	buffer[1] = buffer[2];
+	buffer[2] = buffer[3];
+	buffer[3] = 0;
+	len++;
+
+	intel_hdmi->write_infoframe(encoder, frame->any.type, buffer, len);
 }
 
 static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
@@ -340,40 +369,45 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 {
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	struct dip_infoframe avi_if = {
-		.type = DIP_TYPE_AVI,
-		.ver = DIP_VERSION_AVI,
-		.len = DIP_LEN_AVI,
-	};
+	union hdmi_infoframe frame;
+	int ret;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
+						       adjusted_mode);
+	if (ret < 0) {
+		DRM_ERROR("couldn't fill AVI infoframe\n");
+		return;
+	}
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
-		avi_if.body.avi.YQ_CN_PR |= DIP_AVI_PR_2;
+		frame.avi.pixel_repeat = 1;
 
 	if (intel_hdmi->rgb_quant_range_selectable) {
 		if (intel_crtc->config.limited_color_range)
-			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_LIMITED;
+			frame.avi.quantization_range =
+				HDMI_QUANTIZATION_RANGE_LIMITED;
 		else
-			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_FULL;
+			frame.avi.quantization_range =
+				HDMI_QUANTIZATION_RANGE_FULL;
 	}
 
-	avi_if.body.avi.VIC = drm_match_cea_mode(adjusted_mode);
-
-	intel_set_infoframe(encoder, &avi_if);
+	intel_set_infoframe(encoder, &frame);
 }
 
 static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
 {
-	struct dip_infoframe spd_if;
+	union hdmi_infoframe frame;
+	int ret;
+
+	ret = hdmi_spd_infoframe_init(&frame.spd, "Intel", "Integrated gfx");
+	if (ret < 0) {
+		DRM_ERROR("couldn't fill SPD infoframe\n");
+		return;
+	}
 
-	memset(&spd_if, 0, sizeof(spd_if));
-	spd_if.type = DIP_TYPE_SPD;
-	spd_if.ver = DIP_VERSION_SPD;
-	spd_if.len = DIP_LEN_SPD;
-	strcpy(spd_if.body.spd.vn, "Intel");
-	strcpy(spd_if.body.spd.pd, "Integrated gfx");
-	spd_if.body.spd.sdi = DIP_SPD_PC;
+	frame.spd.sdi = HDMI_SPD_SDI_PC;
 
-	intel_set_infoframe(encoder, &spd_if);
+	intel_set_infoframe(encoder, &frame);
 }
 
 static void g4x_set_infoframes(struct drm_encoder *encoder,
-- 
1.8.3.1



More information about the dri-devel mailing list