[PATCH 07/12] drm/i915/hdmi: Port the infoframe code to the common hdmi helpers

[Ville Syrjälä]

On Tue, Aug 06, 2013 at 08:32:19PM +0100, Damien Lespiau wrote:
> Let's use the drivers/video/hmdi.c and drm infoframe helpers to build
> our infoframes.
> 
> v2: Simplify the logic to compute the buffer size. We can just take the
> maximum infoframe size rounded to 32, which happens to be what the
> hardware let us write anyway.
> 
> v3: Remove unnecessary memset() (Ville Syrjälä)
> 
> Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_hdmi.c | 82 +++++++++++++++++++++++++++------------
>  1 file changed, 58 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index ee67e23..455dfa7 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -325,14 +325,43 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
>  	POSTING_READ(ctl_reg);
>  }
>  
> +/*
> + * The data we write to the DIP data buffer registers is 1 byte bigger than the
> + * HDMI infoframe size because of an ECC/reserved byte at position 3 (starting
> + * at 0). It's also a byte used by DisplayPort so the same DIP registers can be
> + * used for both technologies.
> + *
> + * DW0: Reserved/ECC/DP | HB2 | HB1 | HB0
> + * DW1:       DB3       | DB2 | DB1 | DB0
> + * DW2:       DB7       | DB6 | DB5 | DB4
> + * DW3: ...
> + *
> + * (HB is Header Byte, DB is Data Byte)
> + *
> + * The hdmi pack() functions don't know about that hardware specific hole so we
> + * trick them by giving an offset into the buffer and moving back the header
> + * bytes by one.
> + */
>  static void intel_set_infoframe(struct drm_encoder *encoder,
> -				struct dip_infoframe *frame)
> +				union hdmi_infoframe *frame)
>  {
>  	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> +	uint8_t buffer[VIDEO_DIP_DATA_SIZE];
> +	ssize_t len;
>  
> -	intel_dip_infoframe_csum(frame);
> -	intel_hdmi->write_infoframe(encoder, frame->type, (uint8_t *)frame,
> -				    DIP_HEADER_SIZE + frame->len);
> +	/* see comment above for the reason for this offset */
> +	len = hdmi_infoframe_pack(frame, buffer + 1, sizeof(buffer) - 1);
> +	if (len < 0)
> +		return;
> +
> +	/* Insert the 'hole' (see big comment above) at position 3 */
> +	buffer[0] = buffer[1];
> +	buffer[1] = buffer[2];
> +	buffer[2] = buffer[3];
> +	buffer[3] = 0;
> +	len++;
> +
> +	intel_hdmi->write_infoframe(encoder, frame->any.type, buffer, len);
>  }
>  
>  static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
> @@ -340,40 +369,45 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
>  {
>  	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
>  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> -	struct dip_infoframe avi_if = {
> -		.type = DIP_TYPE_AVI,
> -		.ver = DIP_VERSION_AVI,
> -		.len = DIP_LEN_AVI,
> -	};
> +	union hdmi_infoframe frame;
> +	int ret;
> +
> +	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
> +						       adjusted_mode);
> +	if (ret < 0) {
> +		DRM_ERROR("couldn't fill AVI infoframe\n");
> +		return;
> +	}
>  
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
> -		avi_if.body.avi.YQ_CN_PR |= DIP_AVI_PR_2;
> +		frame.avi.pixel_repeat = 1;
>  
>  	if (intel_hdmi->rgb_quant_range_selectable) {
>  		if (intel_crtc->config.limited_color_range)
> -			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_LIMITED;
> +			frame.avi.quantization_range =
> +				HDMI_QUANTIZATION_RANGE_LIMITED;
>  		else
> -			avi_if.body.avi.ITC_EC_Q_SC |= DIP_AVI_RGB_QUANT_RANGE_FULL;
> +			frame.avi.quantization_range =
> +				HDMI_QUANTIZATION_RANGE_FULL;
>  	}
>  
> -	avi_if.body.avi.VIC = drm_match_cea_mode(adjusted_mode);
> -
> -	intel_set_infoframe(encoder, &avi_if);
> +	intel_set_infoframe(encoder, &frame);
>  }
>  
>  static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
>  {
> -	struct dip_infoframe spd_if;
> +	union hdmi_infoframe frame;
> +	int ret;
> +
> +	ret = hdmi_spd_infoframe_init(&frame.spd, "Intel", "Integrated gfx");
> +	if (ret < 0) {
> +		DRM_ERROR("couldn't fill SPD infoframe\n");
> +		return;
> +	}
>  
> -	memset(&spd_if, 0, sizeof(spd_if));
> -	spd_if.type = DIP_TYPE_SPD;
> -	spd_if.ver = DIP_VERSION_SPD;
> -	spd_if.len = DIP_LEN_SPD;
> -	strcpy(spd_if.body.spd.vn, "Intel");
> -	strcpy(spd_if.body.spd.pd, "Integrated gfx");
> -	spd_if.body.spd.sdi = DIP_SPD_PC;
> +	frame.spd.sdi = HDMI_SPD_SDI_PC;
>  
> -	intel_set_infoframe(encoder, &spd_if);
> +	intel_set_infoframe(encoder, &frame);
>  }
>  
>  static void g4x_set_infoframes(struct drm_encoder *encoder,
> -- 
> 1.8.3.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC