CIK hangs with kernel 3.15, bisected

Fri May 30 04:51:25 PDT 2014

That's right.

Also, you probably want to enable automatic addition of the git-sha1
to the kernel version in menuconfig, there is an option for it, so
that you can have several kernels with the same version but different
sha1 installed.

Marek

On Fri, May 30, 2014 at 1:46 PM, Grigori Goronzy <greg at chown.ath.cx> wrote:
> On 30.05.2014 13:30, Marek Olšák wrote:
>>
>> Grigori,
>>
>> you can git-checkout the commit before and after the memory management
>> changes, compile both and test them.
>>
>
> I was trying to revert the changes, but it looks like too much changed in
> the meantime. The suitable commits to check out should be 0bc490a8 (before)
> and 19dff56a (after), right?
>
>
> Best regards
> Grigori
>
>> Marek
>>
>> On Fri, May 30, 2014 at 2:30 AM, Grigori Goronzy <greg at chown.ath.cx>
>> wrote:
>>>
>>> On 13.05.2014 22:27, Marek Olšák wrote:
>>>>
>>>>
>>>> I applied these two patches Christian sent to dri-devel:
>>>>
>>>> drm/radeon: fix page directory update size estimation
>>>> drm/radeon: fix buffer placement under memory pressure v2
>>>>
>>>> on top of torvalds's master branch.
>>>>
>>>
>>> With latest kernel master (a991639c) I still see a regression, compared
>>> to
>>> 3.13 or 3.14, which have similar performance. Xonotic is about 7% slower.
>>> OpenArena and Unigine Tropics are also noticeably slower, but I didn't
>>> record accurate numbers.
>>>
>>> Maybe the improved memory management has some overhead, but this is not
>>> acceptable IMHO. I'll try to investigate further.
>>>
>>> Best regards
>>>
>>> Grigori
>>>
>>>> Marek
>>>>
>>>> On Tue, May 13, 2014 at 10:19 PM, Grigori Goronzy <greg at chown.ath.cx>
>>>> wrote:
>>>>>
>>>>>
>>>>> On 13.05.2014 21:50, Marek Olšák wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Christian,
>>>>>>
>>>>>> The performance regression I saw with piglit seems to be fixed with
>>>>>> latest kernel git. It's difficult to bisect the kernel, because there
>>>>>> are only merges between 3.14 and 3.15 and the merged committs are
>>>>>> actually based on 3.14-rc1 and 3.14-rc4.
>>>>>>
>>>>>> All seems to be fine with your fixes.
>>>>>>
>>>>>
>>>>> Which fixes have you applied? There are quite a few pending patches on
>>>>> dri-devel, that aren't yet part of drm-fixes-3.15.
>>>>>
>>>>> Grigori
>>>>>
>>>>>
>>>>>> Marek
>>>>>>
>>>>>> On Tue, May 13, 2014 at 5:31 PM, Christian König
>>>>>> <deathsimple at vodafone.de> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Is the performance regression regression caused by the page table
>>>>>>> changes
>>>>>>> or
>>>>>>> something else?
>>>>>>>
>>>>>>> I did made some tests with xonotic while developing it and it didn't
>>>>>>> showed
>>>>>>> anything obvious, but I didn't made tests on different systems.
>>>>>>>
>>>>>>> Christian.
>>>>>>>
>>>>>>> Am 13.05.2014 17:19, schrieb Marek Olšák:
>>>>>>>
>>>>>>>> Your latest patches fix the regression.
>>>>>>>>
>>>>>>>> The performance regression can also be reproduced with piglit "-t
>>>>>>>> texelFetch.fs".
>>>>>>>>
>>>>>>>> Kernel 3.14:
>>>>>>>>        real    0m17.724s
>>>>>>>>        user    0m41.905s
>>>>>>>>        sys    0m11.299s
>>>>>>>>
>>>>>>>> The problematic commit checked out + your fixes (without the PTE
>>>>>>>> patch
>>>>>>>> I
>>>>>>>> think):
>>>>>>>>        real    0m23.474s
>>>>>>>>        user    1m1.008s
>>>>>>>>        sys    0m13.812s
>>>>>>>>
>>>>>>>> Marek
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, May 13, 2014 at 3:57 PM, Christian König
>>>>>>>> <deathsimple at vodafone.de> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Am 13.05.2014 15:22, schrieb Alex Deucher:
>>>>>>>>>
>>>>>>>>>> On Mon, May 12, 2014 at 7:38 PM, Grigori Goronzy
>>>>>>>>>> <greg at chown.ath.cx>
>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I can confirm this fixes it for me, too.
>>>>>>>>>>>
>>>>>>>>>>> 3.15 with these fixes and the large PTE patches actually ends up
>>>>>>>>>>> being
>>>>>>>>>>> noticeably slower than earlier kernels with Xonotic, though. I
>>>>>>>>>>> wonder
>>>>>>>>>>> what's
>>>>>>>>>>> going on.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Allocation overhead?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Unlikely, Xonotic just allocates a single page table at start,
>>>>>>>>> which
>>>>>>>>> then
>>>>>>>>> gets extended to a certain rate until they no longer need more
>>>>>>>>> address
>>>>>>>>> space
>>>>>>>>> and are done with it.
>>>>>>>>>
>>>>>>>>> Grigori, can you bisect and/or try to figure out what's wrong here?
>>>>>>>>>
>>>>>>>>> Christian.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Grigori
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 12.05.2014 14:50, Christian König wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I could reproduce the problem with xonotic and I think I've
>>>>>>>>>>>> found
>>>>>>>>>>>> the
>>>>>>>>>>>> issue.
>>>>>>>>>>>>
>>>>>>>>>>>> Please test the attached patch.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>> Christian.
>>>>>>>>>>>>
>>>>>>>>>>>> Am 11.05.2014 11:06, schrieb Christian König:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have tested it and it doesn't fix the hangs.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Yeah, thought so. Well it was just a guess.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> (Also, I don't like the patch, because it reverts the behavior
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> added
>>>>>>>>>>>>>> for userspace buffers.)
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Actually it shouldn't affect that. The alternative domain
>>>>>>>>>>>>> always
>>>>>>>>>>>>> contains GART even when userspace only specified VRAM as
>>>>>>>>>>>>> placement
>>>>>>>>>>>>> (as
>>>>>>>>>>>>> long as it is technical possible to do so).
>>>>>>>>>>>>>
>>>>>>>>>>>>> So what should happen is that TTM sees the current placement,
>>>>>>>>>>>>> matches
>>>>>>>>>>>>> that with the desired placement and should find that it doesn't
>>>>>>>>>>>>> need
>>>>>>>>>>>>> to move the buffer (we should just test if this behavior really
>>>>>>>>>>>>> works
>>>>>>>>>>>>> as expected).
>>>>>>>>>>>>>
>>>>>>>>>>>>> Christian.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Am 10.05.2014 23:38, schrieb Marek Olšák:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Christian,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have tested it and it doesn't fix the hangs.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> (Also, I don't like the patch, because it reverts the behavior
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> added
>>>>>>>>>>>>>> for userspace buffers.)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Marek
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sat, May 10, 2014 at 6:34 PM, Christian König
>>>>>>>>>>>>>> <deathsimple at vodafone.de> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Couldn't reproduce the issue so far. So the attached patch is
>>>>>>>>>>>>>>> just
>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>> complete shoot into the dark found by rereading the code, but
>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>> might
>>>>>>>>>>>>>>> actually be the problem.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Please give it a try.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Going to keep testing in the meantime,
>>>>>>>>>>>>>>> Christian.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Am 10.05.2014 10:23, schrieb Christian König:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I see hangs with kernel 3.15 and SI under memory pressure,
>>>>>>>>>>>>>>>>> e.g.
>>>>>>>>>>>>>>>>> if
>>>>>>>>>>>>>>>>> I boot
>>>>>>>>>>>>>>>>> with radeon.vramlimit=256 and then run Xonotic timedemo
>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>> high
>>>>>>>>>>>>>>>>> settings.
>>>>>>>>>>>>>>>>> I haven't had a chance to bisect it yet, but it might be a
>>>>>>>>>>>>>>>>> similar
>>>>>>>>>>>>>>>>> problem.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sounds like the same issue to me. Thx for the good test
>>>>>>>>>>>>>>>> case.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Any idea what is wrong with it?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Actually I already wondered that it went so smooth without
>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>> regression
>>>>>>>>>>>>>>>> so far, didn't noticed the bug in bugzilla.kernel.org yet.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Some of the tests allocate a lot of MSAA textures and the
>>>>>>>>>>>>>>>>> tests
>>>>>>>>>>>>>>>>> also
>>>>>>>>>>>>>>>>> run in parallel, which creates a lot of memory pressure and
>>>>>>>>>>>>>>>>> probably
>>>>>>>>>>>>>>>>> causes buffer evictions.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sounds like the underlying problem to me. We probably evict
>>>>>>>>>>>>>>>> some
>>>>>>>>>>>>>>>> part of a
>>>>>>>>>>>>>>>> page table without updating the page directory. Going to dig
>>>>>>>>>>>>>>>> into
>>>>>>>>>>>>>>>> it today,
>>>>>>>>>>>>>>>> it's probably just a one liner missing somewhere in the VM
>>>>>>>>>>>>>>>> code.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Christian.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Am 09.05.2014 23:39, schrieb Grigori Goronzy:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 09.05.2014 20:03, Marek Olšák wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This commit which first appeared in 3.15-rc1 causes hangs
>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>> Bonaire:
>>>>>>>>>>>>>>>>>> [...]
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> The simplest way to reproduce the hangs is to run piglit
>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>> these
>>>>>>>>>>>>>>>>>> parameters:
>>>>>>>>>>>>>>>>>> -t texelFetch.fs
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Some of the tests allocate a lot of MSAA textures and the
>>>>>>>>>>>>>>>>>> tests
>>>>>>>>>>>>>>>>>> also
>>>>>>>>>>>>>>>>>> run in parallel, which creates a lot of memory pressure
>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>> probably
>>>>>>>>>>>>>>>>>> causes buffer evictions.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I see hangs with kernel 3.15 and SI under memory pressure,
>>>>>>>>>>>>>>>>> e.g.
>>>>>>>>>>>>>>>>> if
>>>>>>>>>>>>>>>>> I boot
>>>>>>>>>>>>>>>>> with radeon.vramlimit=256 and then run Xonotic timedemo
>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>> high
>>>>>>>>>>>>>>>>> settings.
>>>>>>>>>>>>>>>>> I haven't had a chance to bisect it yet, but it might be a
>>>>>>>>>>>>>>>>> similar
>>>>>>>>>>>>>>>>> problem.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Grigori
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> dri-devel mailing list
>>>>>>>>>>> dri-devel at lists.freedesktop.org
>>>>>>>>>>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>
>>>
>