[PATCH 2/3] drm/bridge: adv7533: Initialize regulators
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Wed Aug 31 15:53:54 UTC 2016
Hi Archit,
Thank you for the patch.
On Wednesday 31 Aug 2016 16:22:09 Archit Taneja wrote:
> ADV7533 requires supply to the AVDD, V1P2 and V3P3 pins for proper
> functionality.
>
> Initialize and enable the regulators during probe itself. Controlling
> these dynamically is left for later.
You should document the power supplies in the DT bindings.
> Cc: dri-devel at lists.freedesktop.org
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Archit Taneja <architt at codeaurora.org>
> ---
> drivers/gpu/drm/bridge/adv7511/adv7511.h | 16 ++++++++++
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 34 +++++++++++++++------
> drivers/gpu/drm/bridge/adv7511/adv7533.c | 45 +++++++++++++++++++++++++
> 3 files changed, 86 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> b/drivers/gpu/drm/bridge/adv7511/adv7511.h index 161c923..3fcb202 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -12,6 +12,7 @@
> #include <linux/hdmi.h>
> #include <linux/i2c.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_mipi_dsi.h>
> @@ -327,6 +328,10 @@ struct adv7511 {
>
> struct gpio_desc *gpio_pd;
>
> + struct regulator *avdd;
> + struct regulator *v1p2;
> + struct regulator *v3p3;
> +
> /* ADV7533 DSI RX related params */
> struct device_node *host_node;
> struct mipi_dsi_device *dsi;
> @@ -343,6 +348,8 @@ void adv7533_mode_set(struct adv7511 *adv, struct
> drm_display_mode *mode); int adv7533_patch_registers(struct adv7511 *adv);
> void adv7533_uninit_cec(struct adv7511 *adv);
> int adv7533_init_cec(struct adv7511 *adv);
> +int adv7533_init_regulators(struct adv7511 *adv);
> +void adv7533_uninit_regulators(struct adv7511 *adv);
> int adv7533_attach_dsi(struct adv7511 *adv);
> void adv7533_detach_dsi(struct adv7511 *adv);
> int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
> @@ -374,6 +381,15 @@ static inline int adv7533_init_cec(struct adv7511 *adv)
> return -ENODEV;
> }
>
> +static inline int adv7533_init_regulators(struct adv7511 *adv)
> +{
> + return -ENODEV;
> +}
> +
> +static inline void adv7533_uninit_regulators(struct adv7511 *adv)
> +{
> +}
> +
> static inline int adv7533_attach_dsi(struct adv7511 *adv)
> {
> return -ENODEV;
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index ec8fb2e..221bc75
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -941,6 +941,7 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) if (!adv7511)
> return -ENOMEM;
>
> + adv7511->i2c_main = i2c;
> adv7511->powered = false;
> adv7511->status = connector_status_disconnected;
>
> @@ -958,13 +959,21 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) if (ret)
> return ret;
>
> + if (adv7511->type == ADV7533) {
> + ret = adv7533_init_regulators(adv7511);
> + if (ret)
> + return ret;
> + }
> +
> /*
> * The power down GPIO is optional. If present, toggle it from active
to
> * inactive to wake up the encoder.
> */
> adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
> - if (IS_ERR(adv7511->gpio_pd))
> - return PTR_ERR(adv7511->gpio_pd);
> + if (IS_ERR(adv7511->gpio_pd)) {
> + ret = PTR_ERR(adv7511->gpio_pd);
> + goto uninit_regulators;
> + }
>
> if (adv7511->gpio_pd) {
> mdelay(5);
> @@ -972,12 +981,14 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) }
>
> adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> - if (IS_ERR(adv7511->regmap))
> - return PTR_ERR(adv7511->regmap);
> + if (IS_ERR(adv7511->regmap)) {
> + ret = PTR_ERR(adv7511->regmap);
> + goto uninit_regulators;
> + }
>
> ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> if (ret)
> - return ret;
> + goto uninit_regulators;
> dev_dbg(dev, "Rev. %d\n", val);
>
> if (adv7511->type == ADV7511)
> @@ -987,7 +998,7 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) else
> ret = adv7533_patch_registers(adv7511);
> if (ret)
> - return ret;
> + goto uninit_regulators;
>
> regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
edid_i2c_addr);
> regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> @@ -995,10 +1006,11 @@ static int adv7511_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id) regmap_write(adv7511->regmap,
> ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr); adv7511_packet_disable(adv7511,
> 0xffff);
>
> - adv7511->i2c_main = i2c;
> adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> - if (!adv7511->i2c_edid)
> - return -ENOMEM;
> + if (!adv7511->i2c_edid) {
> + ret = -ENOMEM;
> + goto uninit_regulators;
> + }
>
> if (adv7511->type == ADV7533) {
> ret = adv7533_init_cec(adv7511);
> @@ -1043,6 +1055,9 @@ err_unregister_cec:
> adv7533_uninit_cec(adv7511);
> err_i2c_unregister_edid:
> i2c_unregister_device(adv7511->i2c_edid);
> +uninit_regulators:
> + if (adv7511->type == ADV7533)
> + adv7533_uninit_regulators(adv7511);
>
> return ret;
> }
> @@ -1054,6 +1069,7 @@ static int adv7511_remove(struct i2c_client *i2c)
> if (adv7511->type == ADV7533) {
> adv7533_detach_dsi(adv7511);
> adv7533_uninit_cec(adv7511);
> + adv7533_uninit_regulators(adv7511);
> }
>
> drm_bridge_remove(&adv7511->bridge);
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c
> b/drivers/gpu/drm/bridge/adv7511/adv7533.c index 5eebd15..03a59fd 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> @@ -178,6 +178,51 @@ err:
> return ret;
> }
>
> +int adv7533_init_regulators(struct adv7511 *adv)
> +{
> + struct device *dev = &adv->i2c_main->dev;
> + int ret;
> +
> + adv->avdd = devm_regulator_get(dev, "avdd");
> + if (IS_ERR(adv->avdd))
> + return PTR_ERR(adv->avdd);
Doesn't this cause backward compatibility issues with existing device trees
that don't declare regulators ?
> + adv->v1p2 = devm_regulator_get(dev, "v1p2");
> + if (IS_ERR(adv->v1p2))
> + return PTR_ERR(adv->v1p2);
> +
> + adv->v3p3 = devm_regulator_get(dev, "v3p3");
> + if (IS_ERR(adv->v3p3))
> + return PTR_ERR(adv->v3p3);
> +
> + ret = regulator_enable(adv->avdd);
> + if (ret)
> + return ret;
> +
> + ret = regulator_enable(adv->v1p2);
> + if (ret)
> + goto err_v1p2;
> +
> + ret = regulator_enable(adv->v3p3);
> + if (ret)
> + goto err_v3p3;
How about using the devm_regulator_bulk_*() API ?
> + return 0;
> +err_v3p3:
> + regulator_disable(adv->v1p2);
> +err_v1p2:
> + regulator_disable(adv->avdd);
> +
> + return ret;
> +}
> +
> +void adv7533_uninit_regulators(struct adv7511 *adv)
> +{
> + regulator_disable(adv->v3p3);
> + regulator_disable(adv->v1p2);
> + regulator_disable(adv->avdd);
> +}
> +
> int adv7533_attach_dsi(struct adv7511 *adv)
> {
> struct device *dev = &adv->i2c_main->dev;
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list