[PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings

[Archit Taneja]

Add the regulator supply properties needed by ADV7511 and ADV7533.

Cc: devicetree at vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Archit Taneja <architt at codeaurora.org>
---
 Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 6532a59..00ce479 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -38,10 +38,18 @@ The following input format properties are required except in "rgb 1x" and
 - adi,input-justification: The input bit justification ("left", "evenly",
   "right").
 
+- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD
+  pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also powers
+  up the A2VDD pin.
+- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on
+  ADV7511 and V3P3 on ADV7533.
+
 The following properties are required for ADV7533:
 
 - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
   be one of 1, 2, 3 or 4.
+- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
+  either 1.2V or 1.8V. This supply is specific to ADV7533.
 
 Optional properties:
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation