[PATCH v8 08/13] arm64: dts: mt8173: Add display subsystem related nodes

Philipp Zabel p.zabel at pengutronix.de
Wed Feb 3 11:01:50 UTC 2016


Hi Daniel,

Am Dienstag, den 02.02.2016, 16:10 +0800 schrieb Daniel Kurtz:
> On Tue, Jan 5, 2016 at 1:36 AM, Philipp Zabel <p.zabel at pengutronix.de> wrote:
> > From: CK Hu <ck.hu at mediatek.com>
> >
> > This patch adds the device nodes for the DISP function blocks
> > comprising the display subsystem.
> >
> > Signed-off-by: CK Hu <ck.hu at mediatek.com>
> > Signed-off-by: Cawa Cheng <cawa.cheng at mediatek.com>
> > Signed-off-by: Jie Qiu <jie.qiu at mediatek.com>
> > Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
> > Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> > ---
> > Changes since v7:
> >  - Add 26 MHz PLL reference input clock and the high-speed output clock to
> >    the MIPI TX D-PHY nodes
> >  - The HS output clock is routed to the DSI encoder module
> >  - Add power-domains property to all nodes in the MM domain
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi | 237 +++++++++++++++++++++++++++++++
> >  1 file changed, 237 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index 4901f13..68c1cb2 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -25,6 +25,23 @@
[...]
> > +               dpi0: dpi at 1401d000 {
> > +                       compatible = "mediatek,mt8173-dpi";
> > +                       reg = <0 0x1401d000 0 0x1000>;
> > +                       interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
> > +                       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > +                       clocks = <&mmsys CLK_MM_DPI_PIXEL>,
> > +                                <&mmsys CLK_MM_DPI_ENGINE>,
> > +                                <&apmixedsys CLK_APMIXED_TVDPLL>;
> > +                       clock-names = "pixel", "engine", "pll";
> > +
> > +                       port {
> > +                               dpi0_out: endpoint {
> > +                                       remote-endpoint = <&hdmi0_in>;
> 
> nit: At this point in the patch series, you haven't defined hdmi0_in yet.
> Move this port to "Add HDMI related nodes".

Thanks, will do in v10.

regards
Philipp




More information about the dri-devel mailing list