[PATCH v10 10/13] clk: mediatek: make dpi0_sel propagate rate changes

[Michael Turquette]

Quoting Philipp Zabel (2016-02-03 11:25:59)
> This mux is supposed to select a fitting divider after the PLL
> is already set to the correct rate.
> 
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> Acked-by: James Liao <jamesjj.liao at mediatek.com>
> ---
>  drivers/clk/mediatek/clk-mt8173.c | 2 +-
>  drivers/clk/mediatek/clk-mtk.h    | 7 +++++--
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
> index 227e356..682b275 100644
> --- a/drivers/clk/mediatek/clk-mt8173.c
> +++ b/drivers/clk/mediatek/clk-mt8173.c
> @@ -558,7 +558,7 @@ static const struct mtk_composite top_muxes[] __initconst = {
>         MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
>         MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
>         /* CLK_CFG_6 */
> -       MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
> +       MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0),

So the only instance of MUX_GATE that should not propagate it's request
up to the parent is dpi0_sel? Are you sure? I hope so because this patch
changes all MUX_GATE clks to propagate their requests up to their
parents, which is sort of a big change.

Also, the name game is a bit confusing. I can see that you're trying to
prevent having a huge patch that touches every MUX_GATE initialization.
However it isn't obvious from the name "MUX_GATE()" that the macro will
enable CLK_SET_RATE_PARENT functionality. Maybe put a comment above it
just to make it extra clear?

Regards,
Mike

>         MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
>         MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
>         MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index 32d2e45..b607996 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -83,7 +83,7 @@ struct mtk_composite {
>         signed char num_parents;
>  };
>  
> -#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) {  \
> +#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) {    \
>                 .id = _id,                                              \
>                 .name = _name,                                          \
>                 .mux_reg = _reg,                                        \
> @@ -94,9 +94,12 @@ struct mtk_composite {
>                 .divider_shift = -1,                                    \
>                 .parent_names = _parents,                               \
>                 .num_parents = ARRAY_SIZE(_parents),                    \
> -               .flags = CLK_SET_RATE_PARENT,                           \
> +               .flags = _flags,                                        \
>         }
>  
> +#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate)    \
> +       MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
> +
>  #define MUX(_id, _name, _parents, _reg, _shift, _width) {              \
>                 .id = _id,                                              \
>                 .name = _name,                                          \
> -- 
> 2.7.0.rc3
>