[PATCH v10 10/13] clk: mediatek: make dpi0_sel propagate rate changes

Philipp Zabel p.zabel at pengutronix.de
Wed Feb 17 09:19:26 UTC 2016


Hi Michael,

thank you for the comments.

Am Montag, den 15.02.2016, 15:14 -0800 schrieb Michael Turquette:
> Quoting Philipp Zabel (2016-02-03 11:25:59)
> > This mux is supposed to select a fitting divider after the PLL
> > is already set to the correct rate.
> > 
> > Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> > Acked-by: James Liao <jamesjj.liao at mediatek.com>
> > ---
> >  drivers/clk/mediatek/clk-mt8173.c | 2 +-
> >  drivers/clk/mediatek/clk-mtk.h    | 7 +++++--
> >  2 files changed, 6 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
> > index 227e356..682b275 100644
> > --- a/drivers/clk/mediatek/clk-mt8173.c
> > +++ b/drivers/clk/mediatek/clk-mt8173.c
> > @@ -558,7 +558,7 @@ static const struct mtk_composite top_muxes[] __initconst = {
> >         MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
> >         MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
> >         /* CLK_CFG_6 */
> > -       MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
> > +       MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0),
> 
> So the only instance of MUX_GATE that should not propagate it's request
> up to the parent is dpi0_sel? Are you sure?

The other way around. This is the only clock I'm sure of that it
shouldn't propagate. For the others I don't know, so I want to leave
them as they are.

> I hope so because this patch changes all MUX_GATE clks to propagate
> their requests up to their parents, which is sort of a big change.

The MUX_GATE macro previously unconditionally set the
CLK_SET_RATE_PARENT, so nothing should have changed there. See (way)
below.

> Also, the name game is a bit confusing. I can see that you're trying to
> prevent having a huge patch that touches every MUX_GATE initialization.
> However it isn't obvious from the name "MUX_GATE()" that the macro will
> enable CLK_SET_RATE_PARENT functionality. Maybe put a comment above it
> just to make it extra clear?

I can do that.

> >         MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
> >         MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
> >         MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
> > diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> > index 32d2e45..b607996 100644
> > --- a/drivers/clk/mediatek/clk-mtk.h
> > +++ b/drivers/clk/mediatek/clk-mtk.h
> > @@ -83,7 +83,7 @@ struct mtk_composite {
> >         signed char num_parents;
> >  };
> >  
> > -#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) {  \
> > +#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) {    \
> >                 .id = _id,                                              \
> >                 .name = _name,                                          \
> >                 .mux_reg = _reg,                                        \
> > @@ -94,9 +94,12 @@ struct mtk_composite {
> >                 .divider_shift = -1,                                    \
> >                 .parent_names = _parents,                               \
> >                 .num_parents = ARRAY_SIZE(_parents),                    \
> > -               .flags = CLK_SET_RATE_PARENT,                           \
> > +               .flags = _flags,                                        \

This.

> >         }
> >  
> > +#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate)    \
> > +       MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
> > +
> >  #define MUX(_id, _name, _parents, _reg, _shift, _width) {              \
> >                 .id = _id,                                              \
> >                 .name = _name,                                          \
> > -- 
> > 2.7.0.rc3

best regards
Philipp



More information about the dri-devel mailing list