[PATCH v6 04/11] drm/hisilicon: Add plane driver for ADE
Archit Taneja
architt at codeaurora.org
Mon Feb 29 18:48:15 UTC 2016
On 2/26/2016 2:10 PM, Xinliang Liu wrote:
> Add plane funcs and helper funcs for ADE.
>
> v6: None.
> v5: None.
> v4: None.
> v3:
> - A few cleanup.
> v2:
> - Remove abtraction layer.
>
> Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
> ---
> drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 535 +++++++++++++++++++++++-
> 1 file changed, 534 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
> index bb93616dcf3d..aa2cf75cab39 100644
> --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
> @@ -27,13 +27,23 @@
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_atomic.h>
> #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
>
> #include "kirin_drm_drv.h"
> #include "kirin_ade_reg.h"
>
> +#define PRIMARY_CH ADE_CH1 /* primary plane */
> +#define OUT_OVLY ADE_OVLY2 /* output overlay compositor */
Could you briefly explain this overlay/channel mapping? It looks like
it's something that is hard coded at the moment.
Do channels map to planes, and OVLs map to crtcs?
> +#define ADE_DEBUG 1
> +
> #define to_ade_crtc(crtc) \
> container_of(crtc, struct ade_crtc, base)
>
> +#define to_ade_plane(plane) \
> + container_of(plane, struct ade_plane, base)
> +
> struct ade_hw_ctx {
> void __iomem *base;
> struct regmap *noc_regmap;
> @@ -52,11 +62,76 @@ struct ade_crtc {
> u32 out_format;
> };
>
> +struct ade_plane {
> + struct drm_plane base;
> + void *ctx;
> + u8 ch; /* channel */
> +};
> +
> struct ade_data {
> struct ade_crtc acrtc;
> + struct ade_plane aplane[ADE_CH_NUM];
> struct ade_hw_ctx ctx;
> };
>
> +/* ade-format info: */
> +struct ade_format {
> + u32 pixel_format;
> + enum ade_fb_format ade_format;
> +};
> +
> +static const struct ade_format ade_formats[] = {
> + /* 16bpp RGB: */
> + { DRM_FORMAT_RGB565, ADE_RGB_565 },
> + { DRM_FORMAT_BGR565, ADE_BGR_565 },
> + /* 24bpp RGB: */
> + { DRM_FORMAT_RGB888, ADE_RGB_888 },
> + { DRM_FORMAT_BGR888, ADE_BGR_888 },
> + /* 32bpp [A]RGB: */
> + { DRM_FORMAT_XRGB8888, ADE_XRGB_8888 },
> + { DRM_FORMAT_XBGR8888, ADE_XBGR_8888 },
> + { DRM_FORMAT_RGBA8888, ADE_RGBA_8888 },
> + { DRM_FORMAT_BGRA8888, ADE_BGRA_8888 },
> + { DRM_FORMAT_ARGB8888, ADE_ARGB_8888 },
> + { DRM_FORMAT_ABGR8888, ADE_ABGR_8888 },
> +};
> +
> +static const u32 channel_formats1[] = {
> + /* channel 1,2,3,4 */
> + DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_RGB888,
> + DRM_FORMAT_BGR888, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
> + DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888, DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_ABGR8888
> +};
> +
> +u32 ade_get_channel_formats(u8 ch, const u32 **formats)
> +{
> + switch (ch) {
> + case ADE_CH1:
> + *formats = channel_formats1;
> + return ARRAY_SIZE(channel_formats1);
> + default:
> + DRM_ERROR("no this channel %d\n", ch);
> + *formats = NULL;
> + return 0;
> + }
> +}
> +
> +/* convert from fourcc format to ade format */
> +static u32 ade_get_format(u32 pixel_format)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ade_formats); i++)
> + if (ade_formats[i].pixel_format == pixel_format)
> + return ade_formats[i].ade_format;
> +
> + /* not found */
> + DRM_ERROR("Not found pixel format!!fourcc_format= %d\n",
> + pixel_format);
> + return ADE_FORMAT_NOT_SUPPORT;
> +}
> +
> static void ade_update_reload_bit(void __iomem *base, u32 bit_num, u32 val)
> {
> u32 bit_ofst, reg_num;
> @@ -89,7 +164,7 @@ static void ade_init(struct ade_hw_ctx *ctx)
> /* clear overlay */
> writel(0, base + ADE_OVLY1_TRANS_CFG);
> writel(0, base + ADE_OVLY_CTL);
> - writel(0, base + ADE_OVLYX_CTL(ADE_OVLY2));
> + writel(0, base + ADE_OVLYX_CTL(OUT_OVLY));
> /* clear reset and reload regs */
> writel(MASK(32), base + ADE_SOFT_RST_SEL(0));
> writel(MASK(32), base + ADE_SOFT_RST_SEL(1));
> @@ -147,6 +222,10 @@ static void ade_ldi_set_mode(struct ade_crtc *acrtc,
> mode->clock * 1000, ret);
> adj_mode->clock = clk_get_rate(ctx->ade_pix_clk) / 1000;
>
> + /* set overlay compositor output size */
> + writel(((width - 1) << OUTPUT_XSIZE_OFST) | (height - 1),
> + base + ADE_OVLY_OUTPUT_SIZE(OUT_OVLY));
> +
> /* ctran6 setting */
> writel(CTRAN_BYPASS_ON, base + ADE_CTRAN_DIS(ADE_CTRAN6));
> /* the configured value is actual value - 1 */
> @@ -219,6 +298,10 @@ static void ade_display_enable(struct ade_crtc *acrtc)
> void __iomem *base = ctx->base;
> u32 out_fmt = acrtc->out_format;
>
> + /* enable output overlay compositor */
> + writel(ADE_ENABLE, base + ADE_OVLYX_CTL(OUT_OVLY));
> + ade_update_reload_bit(base, OVLY_OFST + OUT_OVLY, 0);
> +
> /* display source setting */
> writel(DISP_SRC_OVLY2, base + ADE_DISP_SRC_CFG);
>
> @@ -232,6 +315,97 @@ static void ade_display_enable(struct ade_crtc *acrtc)
> writel(DSI_PCLK_ON, base + LDI_HDMI_DSI_GT);
> }
>
> +#if ADE_DEBUG
> +static void ade_rdma_dump_regs(void __iomem *base, u32 ch)
> +{
> + u32 reg_ctrl, reg_addr, reg_size, reg_stride, reg_space, reg_en;
> + u32 val;
> +
> + reg_ctrl = RD_CH_CTRL(ch);
> + reg_addr = RD_CH_ADDR(ch);
> + reg_size = RD_CH_SIZE(ch);
> + reg_stride = RD_CH_STRIDE(ch);
> + reg_space = RD_CH_SPACE(ch);
> + reg_en = RD_CH_EN(ch);
> +
> + val = ade_read_reload_bit(base, RDMA_OFST + ch);
> + DRM_DEBUG_DRIVER("[rdma%d]: reload(%d)\n", ch + 1, val);
> + val = readl(base + reg_ctrl);
> + DRM_DEBUG_DRIVER("[rdma%d]: reg_ctrl(0x%08x)\n", ch + 1, val);
> + val = readl(base + reg_addr);
> + DRM_DEBUG_DRIVER("[rdma%d]: reg_addr(0x%08x)\n", ch + 1, val);
> + val = readl(base + reg_size);
> + DRM_DEBUG_DRIVER("[rdma%d]: reg_size(0x%08x)\n", ch + 1, val);
> + val = readl(base + reg_stride);
> + DRM_DEBUG_DRIVER("[rdma%d]: reg_stride(0x%08x)\n", ch + 1, val);
> + val = readl(base + reg_space);
> + DRM_DEBUG_DRIVER("[rdma%d]: reg_space(0x%08x)\n", ch + 1, val);
> + val = readl(base + reg_en);
> + DRM_DEBUG_DRIVER("[rdma%d]: reg_en(0x%08x)\n", ch + 1, val);
> +}
> +
> +static void ade_clip_dump_regs(void __iomem *base, u32 ch)
> +{
> + u32 val;
> +
> + val = ade_read_reload_bit(base, CLIP_OFST + ch);
> + DRM_DEBUG_DRIVER("[clip%d]: reload(%d)\n", ch + 1, val);
> + val = readl(base + ADE_CLIP_DISABLE(ch));
> + DRM_DEBUG_DRIVER("[clip%d]: reg_clip_disable(0x%08x)\n", ch + 1, val);
> + val = readl(base + ADE_CLIP_SIZE0(ch));
> + DRM_DEBUG_DRIVER("[clip%d]: reg_clip_size0(0x%08x)\n", ch + 1, val);
> + val = readl(base + ADE_CLIP_SIZE1(ch));
> + DRM_DEBUG_DRIVER("[clip%d]: reg_clip_size1(0x%08x)\n", ch + 1, val);
> +}
> +
> +static void ade_compositor_routing_dump_regs(void __iomem *base, u32 ch)
> +{
> + u8 ovly_ch = 0; /* TODO: Only primary plane now */
> + u32 val;
> +
> + val = readl(base + ADE_OVLY_CH_XY0(ovly_ch));
> + DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_xy0(0x%08x)\n", ovly_ch, val);
> + val = readl(base + ADE_OVLY_CH_XY1(ovly_ch));
> + DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_xy1(0x%08x)\n", ovly_ch, val);
> + val = readl(base + ADE_OVLY_CH_CTL(ovly_ch));
> + DRM_DEBUG_DRIVER("[overlay ch%d]: reg_ch_ctl(0x%08x)\n", ovly_ch, val);
> +}
> +
> +static void ade_dump_overlay_compositor_regs(void __iomem *base, u32 comp)
> +{
> + u32 val;
> +
> + val = ade_read_reload_bit(base, OVLY_OFST + comp);
> + DRM_DEBUG_DRIVER("[overlay%d]: reload(%d)\n", comp + 1, val);
> + writel(ADE_ENABLE, base + ADE_OVLYX_CTL(comp));
> + DRM_DEBUG_DRIVER("[overlay%d]: reg_ctl(0x%08x)\n", comp + 1, val);
> + val = readl(base + ADE_OVLY_CTL);
> + DRM_DEBUG_DRIVER("ovly_ctl(0x%08x)\n", val);
> +}
> +
> +static void ade_dump_regs(void __iomem *base)
> +{
> + u32 i;
> +
> + /* dump channel regs */
> + for (i = 0; i < ADE_CH_NUM; i++) {
> + /* dump rdma regs */
> + ade_rdma_dump_regs(base, i);
> +
> + /* dump clip regs */
> + ade_clip_dump_regs(base, i);
> +
> + /* dump compositor routing regs */
> + ade_compositor_routing_dump_regs(base, i);
> + }
> +
> + /* dump overlay compositor regs */
> + ade_dump_overlay_compositor_regs(base, OUT_OVLY);
> +}
> +#else
> +static void ade_dump_regs(void __iomem *base) { }
> +#endif
> +
> static void ade_crtc_enable(struct drm_crtc *crtc)
> {
> struct ade_crtc *acrtc = to_ade_crtc(crtc);
> @@ -249,6 +423,7 @@ static void ade_crtc_enable(struct drm_crtc *crtc)
>
> ade_set_medianoc_qos(acrtc);
> ade_display_enable(acrtc);
> + ade_dump_regs(ctx->base);
> acrtc->enable = true;
> }
>
> @@ -303,6 +478,7 @@ static void ade_crtc_atomic_flush(struct drm_crtc *crtc,
>
> /* only crtc is eanbled regs take effect */
> if (acrtc->enable) {
> + ade_dump_regs(base);
> /* flush ade regitsters */
> writel(ADE_ENABLE, base + ADE_EN);
> }
> @@ -359,6 +535,338 @@ static int ade_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> return 0;
> }
>
> +static void ade_rdma_set(void __iomem *base, struct drm_framebuffer *fb,
> + u32 ch, u32 y, u32 in_h, u32 fmt)
> +{
> + struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0);
> + u32 reg_ctrl, reg_addr, reg_size, reg_stride, reg_space, reg_en;
> + u32 stride = fb->pitches[0];
> + u32 addr = (u32)obj->paddr + y * stride;
> +
> + DRM_DEBUG_DRIVER("rdma%d: (y=%d, height=%d), stride=%d, paddr=0x%x\n",
> + ch + 1, y, in_h, stride, (u32)obj->paddr);
> + DRM_DEBUG_DRIVER("addr=0x%x, fb:%dx%d, pixel_format=%d(%s)\n",
> + addr, fb->width, fb->height, fmt,
> + drm_get_format_name(fb->pixel_format));
> +
> + /* get reg offset */
> + reg_ctrl = RD_CH_CTRL(ch);
> + reg_addr = RD_CH_ADDR(ch);
> + reg_size = RD_CH_SIZE(ch);
> + reg_stride = RD_CH_STRIDE(ch);
> + reg_space = RD_CH_SPACE(ch);
> + reg_en = RD_CH_EN(ch);
> +
> + /*
> + * TODO: set rotation
> + */
> + writel((fmt << 16) & 0x1f0000, base + reg_ctrl);
> + writel(addr, base + reg_addr);
> + writel((in_h << 16) | stride, base + reg_size);
> + writel(stride, base + reg_stride);
> + writel(in_h * stride, base + reg_space);
> + writel(ADE_ENABLE, base + reg_en);
> + ade_update_reload_bit(base, RDMA_OFST + ch, 0);
> +}
> +
> +static void ade_rdma_disable(void __iomem *base, u32 ch)
> +{
> + u32 reg_en;
> +
> + /* get reg offset */
> + reg_en = RD_CH_EN(ch);
> + writel(0, base + reg_en);
> + ade_update_reload_bit(base, RDMA_OFST + ch, 1);
> +}
> +
> +static void ade_clip_set(void __iomem *base, u32 ch, u32 fb_w, u32 x,
> + u32 in_w, u32 in_h)
> +{
> + u32 disable_val;
> + u32 clip_left;
> + u32 clip_right;
> +
> + /*
> + * clip width, no need to clip height
> + */
> + if (fb_w == in_w) { /* bypass */
> + disable_val = 1;
> + clip_left = 0;
> + clip_right = 0;
> + } else {
> + disable_val = 0;
> + clip_left = x;
> + clip_right = fb_w - (x + in_w) - 1;
> + }
> +
> + DRM_DEBUG_DRIVER("clip%d: clip_left=%d, clip_right=%d\n",
> + ch + 1, clip_left, clip_right);
> +
> + writel(disable_val, base + ADE_CLIP_DISABLE(ch));
> + writel((fb_w - 1) << 16 | (in_h - 1), base + ADE_CLIP_SIZE0(ch));
> + writel(clip_left << 16 | clip_right, base + ADE_CLIP_SIZE1(ch));
> + ade_update_reload_bit(base, CLIP_OFST + ch, 0);
> +}
> +
> +static void ade_clip_disable(void __iomem *base, u32 ch)
> +{
> + writel(1, base + ADE_CLIP_DISABLE(ch));
> + ade_update_reload_bit(base, CLIP_OFST + ch, 1);
> +}
> +
> +static bool has_Alpha_channel(int format)
> +{
> + switch (format) {
> + case ADE_ARGB_8888:
> + case ADE_ABGR_8888:
> + case ADE_RGBA_8888:
> + case ADE_BGRA_8888:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static void ade_get_blending_params(u32 fmt, u8 glb_alpha, u8 *alp_mode,
> + u8 *alp_sel, u8 *under_alp_sel)
> +{
> + bool has_alpha = has_Alpha_channel(fmt);
> +
> + /*
> + * get alp_mode
> + */
> + if (has_alpha && glb_alpha < 255)
> + *alp_mode = ADE_ALP_PIXEL_AND_GLB;
> + else if (has_alpha)
> + *alp_mode = ADE_ALP_PIXEL;
> + else
> + *alp_mode = ADE_ALP_GLOBAL;
> +
> + /*
> + * get alp sel
> + */
> + *alp_sel = ADE_ALP_MUL_COEFF_3; /* 1 */
> + *under_alp_sel = ADE_ALP_MUL_COEFF_2; /* 0 */
> +}
> +
> +static void ade_compositor_routing_set(void __iomem *base, u8 ch,
> + u32 x0, u32 y0,
> + u32 in_w, u32 in_h, u32 fmt)
> +{
> + u8 ovly_ch = 0; /* TODO: This is the zpos, only one plane now */
Does the ovly_ch map to the crtc here? If so, maybe instead of hard
coding it here, you could extract the channel number via plane->crtc?
Other than the hard coding, it looks fine to me.
Thanks,
Archit
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the dri-devel
mailing list