[PATCH v6 05/11] drm/hisilicon: Add vblank driver for ADE
Xinliang Liu
xinliang.liu at linaro.org
Fri Feb 26 08:40:22 UTC 2016
Add vblank irq handle.
v6: None.
v5: None.
v4: None.
v3:
- Remove hisi_get_crtc_from_index func.
- A few cleanup.
v2:
- Remove abtraction layer.
Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
---
drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 62 +++++++++++++++++++++++++
drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 14 +++++-
2 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index aa2cf75cab39..749382952ab7 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -292,6 +292,59 @@ static void ade_set_medianoc_qos(struct ade_crtc *acrtc)
SOCKET_QOS_EN, SOCKET_QOS_EN);
}
+static int ade_enable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+ struct kirin_drm_private *priv = dev->dev_private;
+ struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
+ struct ade_hw_ctx *ctx = acrtc->ctx;
+ void __iomem *base = ctx->base;
+
+ if (!ctx->power_on)
+ (void)ade_power_up(ctx);
+
+ ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
+ MASK(1), 1);
+
+ return 0;
+}
+
+static void ade_disable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+ struct kirin_drm_private *priv = dev->dev_private;
+ struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
+ struct ade_hw_ctx *ctx = acrtc->ctx;
+ void __iomem *base = ctx->base;
+
+ if (!ctx->power_on) {
+ DRM_ERROR("power is down! vblank disable fail\n");
+ return;
+ }
+
+ ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
+ MASK(1), 0);
+}
+
+static irqreturn_t ade_irq_handler(int irq, void *data)
+{
+ struct ade_crtc *acrtc = data;
+ struct ade_hw_ctx *ctx = acrtc->ctx;
+ struct drm_crtc *crtc = &acrtc->base;
+ void __iomem *base = ctx->base;
+ u32 status;
+
+ status = readl(base + LDI_MSK_INT);
+ DRM_DEBUG_VBL("LDI IRQ: status=0x%X\n", status);
+
+ /* vblank irq */
+ if (status & BIT(FRAME_END_INT_EN_OFST)) {
+ ade_update_bits(base + LDI_INT_CLR, FRAME_END_INT_EN_OFST,
+ MASK(1), 1);
+ drm_crtc_handle_vblank(crtc);
+ }
+
+ return IRQ_HANDLED;
+}
+
static void ade_display_enable(struct ade_crtc *acrtc)
{
struct ade_hw_ctx *ctx = acrtc->ctx;
@@ -967,6 +1020,15 @@ int ade_drm_init(struct drm_device *dev)
if (ret)
return ret;
+ /* vblank irq init */
+ ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler,
+ DRIVER_IRQ_SHARED, dev->driver->name, acrtc);
+ if (ret)
+ return ret;
+ dev->driver->get_vblank_counter = drm_vblank_no_hw_counter;
+ dev->driver->enable_vblank = ade_enable_vblank;
+ dev->driver->disable_vblank = ade_disable_vblank;
+
return 0;
}
diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
index 055729c1889c..723888feb760 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
@@ -32,6 +32,7 @@ static int kirin_drm_kms_cleanup(struct drm_device *dev)
{
struct kirin_drm_private *priv = dev->dev_private;
+ drm_vblank_cleanup(dev);
dc_ops->cleanup(dev);
drm_mode_config_cleanup(dev);
devm_kfree(dev->dev, priv);
@@ -85,11 +86,22 @@ static int kirin_drm_kms_init(struct drm_device *dev)
goto err_dc_cleanup;
}
+ /* vblank init */
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (ret) {
+ DRM_ERROR("failed to initialize vblank.\n");
+ goto err_unbind_all;
+ }
+ /* with irq_enabled = true, we can use the vblank feature. */
+ dev->irq_enabled = true;
+
/* reset all the states of crtc/plane/encoder/connector */
drm_mode_config_reset(dev);
return 0;
+err_unbind_all:
+ component_unbind_all(dev->dev, dev);
err_dc_cleanup:
dc_ops->cleanup(dev);
err_mode_config_cleanup:
@@ -123,7 +135,7 @@ static int kirin_gem_cma_dumb_create(struct drm_file *file,
static struct drm_driver kirin_drm_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
- DRIVER_ATOMIC,
+ DRIVER_ATOMIC | DRIVER_HAVE_IRQ,
.fops = &kirin_drm_fops,
.set_busid = drm_platform_set_busid,
--
2.7.1
More information about the dri-devel
mailing list