[PATCH v6 05/11] drm/hisilicon: Add vblank driver for ADE

[Archit Taneja]

On 2/26/2016 2:10 PM, Xinliang Liu wrote:
> Add vblank irq handle.
>
> v6: None.
> v5: None.
> v4: None.
> v3:
> - Remove hisi_get_crtc_from_index func.
> - A few cleanup.
> v2:
> - Remove abtraction layer.
>
> Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
> ---
>   drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 62 +++++++++++++++++++++++++
>   drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c | 14 +++++-
>   2 files changed, 75 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
> index aa2cf75cab39..749382952ab7 100644
> --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
> @@ -292,6 +292,59 @@ static void ade_set_medianoc_qos(struct ade_crtc *acrtc)
>   			   SOCKET_QOS_EN, SOCKET_QOS_EN);
>   }
>
> +static int ade_enable_vblank(struct drm_device *dev, unsigned int pipe)
> +{
> +	struct kirin_drm_private *priv = dev->dev_private;
> +	struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
> +	struct ade_hw_ctx *ctx = acrtc->ctx;
> +	void __iomem *base = ctx->base;
> +
> +	if (!ctx->power_on)
> +		(void)ade_power_up(ctx);
> +
> +	ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
> +			MASK(1), 1);
> +
> +	return 0;
> +}
> +
> +static void ade_disable_vblank(struct drm_device *dev, unsigned int pipe)
> +{
> +	struct kirin_drm_private *priv = dev->dev_private;
> +	struct ade_crtc *acrtc = to_ade_crtc(priv->crtc[pipe]);
> +	struct ade_hw_ctx *ctx = acrtc->ctx;
> +	void __iomem *base = ctx->base;
> +
> +	if (!ctx->power_on) {
> +		DRM_ERROR("power is down! vblank disable fail\n");
> +		return;
> +	}
> +
> +	ade_update_bits(base + LDI_INT_EN, FRAME_END_INT_EN_OFST,
> +			MASK(1), 0);
> +}
> +
> +static irqreturn_t ade_irq_handler(int irq, void *data)
> +{
> +	struct ade_crtc *acrtc = data;
> +	struct ade_hw_ctx *ctx = acrtc->ctx;
> +	struct drm_crtc *crtc = &acrtc->base;
> +	void __iomem *base = ctx->base;
> +	u32 status;
> +
> +	status = readl(base + LDI_MSK_INT);
> +	DRM_DEBUG_VBL("LDI IRQ: status=0x%X\n", status);
> +
> +	/* vblank irq */
> +	if (status & BIT(FRAME_END_INT_EN_OFST)) {
> +		ade_update_bits(base + LDI_INT_CLR, FRAME_END_INT_EN_OFST,
> +				MASK(1), 1);
> +		drm_crtc_handle_vblank(crtc);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
>   static void ade_display_enable(struct ade_crtc *acrtc)
>   {
>   	struct ade_hw_ctx *ctx = acrtc->ctx;
> @@ -967,6 +1020,15 @@ int ade_drm_init(struct drm_device *dev)
>   	if (ret)
>   		return ret;
>
> +	/* vblank irq init */
> +	ret = devm_request_irq(dev->dev, ctx->irq, ade_irq_handler,
> +			       DRIVER_IRQ_SHARED, dev->driver->name, acrtc);

This isn't the way we set up interrupts for kms drivers. We need to
provide the handler in drm_driver and call drm_irq_install.

> +	if (ret)
> +		return ret;
> +	dev->driver->get_vblank_counter = drm_vblank_no_hw_counter;
> +	dev->driver->enable_vblank = ade_enable_vblank;
> +	dev->driver->disable_vblank = ade_disable_vblank;
> +
>   	return 0;
>   }
>
> diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
> index 055729c1889c..723888feb760 100644
> --- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
> +++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
> @@ -32,6 +32,7 @@ static int kirin_drm_kms_cleanup(struct drm_device *dev)
>   {
>   	struct kirin_drm_private *priv = dev->dev_private;
>
> +	drm_vblank_cleanup(dev);
>   	dc_ops->cleanup(dev);
>   	drm_mode_config_cleanup(dev);
>   	devm_kfree(dev->dev, priv);
> @@ -85,11 +86,22 @@ static int kirin_drm_kms_init(struct drm_device *dev)
>   		goto err_dc_cleanup;
>   	}
>
> +	/* vblank init */
> +	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> +	if (ret) {
> +		DRM_ERROR("failed to initialize vblank.\n");
> +		goto err_unbind_all;
> +	}
> +	/* with irq_enabled = true, we can use the vblank feature. */
> +	dev->irq_enabled = true;
> +
>   	/* reset all the states of crtc/plane/encoder/connector */
>   	drm_mode_config_reset(dev);
>
>   	return 0;
>
> +err_unbind_all:
> +	component_unbind_all(dev->dev, dev);
>   err_dc_cleanup:
>   	dc_ops->cleanup(dev);
>   err_mode_config_cleanup:
> @@ -123,7 +135,7 @@ static int kirin_gem_cma_dumb_create(struct drm_file *file,
>
>   static struct drm_driver kirin_drm_driver = {
>   	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
> -				  DRIVER_ATOMIC,
> +				  DRIVER_ATOMIC | DRIVER_HAVE_IRQ,

DRIVER_IRQ_SHARED should be added here if you want IRQF_SHARED flag set
when requesting the handler.

Archit

>   	.fops			= &kirin_drm_fops,
>   	.set_busid		= drm_platform_set_busid,
>
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project