[PATCH v3 3/3] drm/omap: panel-dpi: implement support for a vcc regulator
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Mar 21 21:10:27 UTC 2016
To allow supporting displays that need some logic to enable power to the
display try to get a vcc-supply property from the device tree and drive
the resulting regulator accordingly.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index 201a1c1a6f42..8c3f31ebff00 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -32,6 +33,7 @@ struct panel_drv_data {
int backlight_gpio;
struct gpio_desc *enable_gpio;
+ struct regulator *vcc_supply;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -83,6 +85,12 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
if (r)
return r;
+ r = regulator_enable(ddata->vcc_supply);
+ if (r) {
+ in->ops.dpi->disable(in);
+ return r;
+ }
+
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (gpio_is_valid(ddata->backlight_gpio))
@@ -105,6 +113,7 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+ regulator_disable(ddata->vcc_supply);
in->ops.dpi->disable(in);
@@ -223,6 +232,10 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
if (IS_ERR(gpio))
return PTR_ERR(gpio);
+ ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc");
+ if (IS_ERR(ddata->vcc_supply))
+ return PTR_ERR(ddata->vcc_supply);
+
ddata->backlight_gpio = -ENOENT;
r = of_get_display_timing(node, "panel-timing", &timing);
--
2.7.0
More information about the dri-devel
mailing list