[PATCH v3 4/4] drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Wed May 4 11:45:22 UTC 2016
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
DP dual mode type 1 DVI adaptors aren't required to implement any
registers, so it's a bit hard to detect them. The best way would
be to check the state of the CONFIG1 pin, but we have no way to
do that. So as a last resort, check the VBT to see if the HDMI
port is in fact a dual mode capable DP port.
v2: Deal with VBT code reorganization
Deal with DRM_DP_DUAL_MODE_UNKNOWN
Reduce DEVICE_TYPE_DP_DUAL_MODE_BITS a bit
Accept both DP and HDMI dvo_port in VBT as my BSW
at least declare its DP port as HDMI :(
v3: Ignore DEVICE_TYPE_NOT_HDMI_OUTPUT (Shashanl)
Cc: stable at vger.kernel.org
Cc: Tore Anderson <tore at fud.no>
Reported-by: Tore Anderson <tore at fud.no>
Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Shashank Sharma <shashank.sharma at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_bios.c | 36 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_hdmi.c | 30 +++++++++++++++++++++++++----
drivers/gpu/drm/i915/intel_vbt_defs.h | 12 ++++++++++++
4 files changed, 75 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ff6aaf0c4e1e..abe43922a08f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3489,6 +3489,7 @@ bool intel_bios_is_valid_vbt(const void *buf, size_t size);
bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv);
bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin);
bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
+bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port);
bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
enum port port);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 81518116e00d..8b68c4882fba 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -1597,6 +1597,42 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
return false;
}
+bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port)
+{
+ static const struct {
+ u16 dp, hdmi;
+ } port_mapping[] = {
+ /*
+ * Buggy VBTs may declare DP ports as having
+ * HDMI type dvo_port :( So let's check both.
+ */
+ [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
+ [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
+ [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
+ [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+ };
+ int i;
+
+ if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
+ return false;
+
+ if (!dev_priv->vbt.child_dev_num)
+ return false;
+
+ for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
+ const union child_device_config *p_child =
+ &dev_priv->vbt.child_dev[i];
+
+ if ((p_child->common.dvo_port == port_mapping[port].dp ||
+ p_child->common.dvo_port == port_mapping[port].hdmi) &&
+ (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) ==
+ (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
+ return true;
+ }
+
+ return false;
+}
+
/**
* intel_bios_is_dsi_present - is DSI present in VBT
* @dev_priv: i915 device instance
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index c4d93e6b4bed..6b52c6accf6a 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1396,16 +1396,38 @@ intel_hdmi_unset_edid(struct drm_connector *connector)
}
static void
-intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector)
+intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
+ enum port port = hdmi_to_dig_port(hdmi)->port;
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
- if (type == DRM_DP_DUAL_MODE_NONE ||
- type == DRM_DP_DUAL_MODE_UNKNOWN)
+ /*
+ * Type 1 DVI adaptors are not required to implement any
+ * registers, so we can't always detect their presence.
+ * Ideally we should be able to check the state of the
+ * CONFIG1 pin, but no such luck on our hardware.
+ *
+ * The only method left to us is to check the VBT to see
+ * if the port is a dual mode capable DP port. But let's
+ * only do that when we sucesfully read the EDID, to avoid
+ * confusing log messages about DP dual mode adaptors when
+ * there's nothing connected to the port.
+ */
+ if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
+ if (has_edid &&
+ intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
+ DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
+ type = DRM_DP_DUAL_MODE_TYPE1_DVI;
+ } else {
+ type = DRM_DP_DUAL_MODE_NONE;
+ }
+ }
+
+ if (type == DRM_DP_DUAL_MODE_NONE)
return;
hdmi->dp_dual_mode.type = type;
@@ -1432,7 +1454,7 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force)
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
- intel_hdmi_dp_dual_mode_detect(connector);
+ intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
}
diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h
index a4a42f254c35..4f9799f025a9 100644
--- a/drivers/gpu/drm/i915/intel_vbt_defs.h
+++ b/drivers/gpu/drm/i915/intel_vbt_defs.h
@@ -746,6 +746,7 @@ struct bdb_psr {
#define DEVICE_TYPE_INT_TV 0x1009
#define DEVICE_TYPE_HDMI 0x60D2
#define DEVICE_TYPE_DP 0x68C6
+#define DEVICE_TYPE_DP_DUAL_MODE 0x60D6
#define DEVICE_TYPE_eDP 0x78C6
#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
@@ -780,6 +781,17 @@ struct bdb_psr {
DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
DEVICE_TYPE_ANALOG_OUTPUT)
+#define DEVICE_TYPE_DP_DUAL_MODE_BITS \
+ (DEVICE_TYPE_INTERNAL_CONNECTOR | \
+ DEVICE_TYPE_MIPI_OUTPUT | \
+ DEVICE_TYPE_COMPOSITE_OUTPUT | \
+ DEVICE_TYPE_LVDS_SINGALING | \
+ DEVICE_TYPE_TMDS_DVI_SIGNALING | \
+ DEVICE_TYPE_VIDEO_SIGNALING | \
+ DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
+ DEVICE_TYPE_DIGITAL_OUTPUT | \
+ DEVICE_TYPE_ANALOG_OUTPUT)
+
/* define the DVO port for HDMI output type */
#define DVO_B 1
#define DVO_C 2
--
2.7.4
More information about the dri-devel
mailing list