[PATCH v3 4/4] drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT

Sharma, Shashank shashank.sharma at intel.com
Wed May 4 13:50:58 UTC 2016


Reviewed-by: Shashank Sharma <shashank.sharma at intel.com>

Regards
Shashank
On 5/4/2016 5:15 PM, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> DP dual mode type 1 DVI adaptors aren't required to implement any
> registers, so it's a bit hard to detect them. The best way would
> be to check the state of the CONFIG1 pin, but we have no way to
> do that. So as a last resort, check the VBT to see if the HDMI
> port is in fact a dual mode capable DP port.
>
> v2: Deal with VBT code reorganization
>      Deal with DRM_DP_DUAL_MODE_UNKNOWN
>      Reduce DEVICE_TYPE_DP_DUAL_MODE_BITS a bit
>      Accept both DP and HDMI dvo_port in VBT as my BSW
>      at least declare its DP port as HDMI :(
> v3: Ignore DEVICE_TYPE_NOT_HDMI_OUTPUT (Shashanl)
>
> Cc: stable at vger.kernel.org
> Cc: Tore Anderson <tore at fud.no>
> Reported-by: Tore Anderson <tore at fud.no>
> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Shashank Sharma <shashank.sharma at intel.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>   drivers/gpu/drm/i915/i915_drv.h       |  1 +
>   drivers/gpu/drm/i915/intel_bios.c     | 36 +++++++++++++++++++++++++++++++++++
>   drivers/gpu/drm/i915/intel_hdmi.c     | 30 +++++++++++++++++++++++++----
>   drivers/gpu/drm/i915/intel_vbt_defs.h | 12 ++++++++++++
>   4 files changed, 75 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index ff6aaf0c4e1e..abe43922a08f 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3489,6 +3489,7 @@ bool intel_bios_is_valid_vbt(const void *buf, size_t size);
>   bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv);
>   bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin);
>   bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
> +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port);
>   bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
>   bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
>   				     enum port port);
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 81518116e00d..8b68c4882fba 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -1597,6 +1597,42 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
>   	return false;
>   }
>
> +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port)
> +{
> +	static const struct {
> +		u16 dp, hdmi;
> +	} port_mapping[] = {
> +		/*
> +		 * Buggy VBTs may declare DP ports as having
> +		 * HDMI type dvo_port :( So let's check both.
> +		 */
> +		[PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
> +		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
> +		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
> +		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
> +	};
> +	int i;
> +
> +	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
> +		return false;
> +
> +	if (!dev_priv->vbt.child_dev_num)
> +		return false;
> +
> +	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
> +		const union child_device_config *p_child =
> +			&dev_priv->vbt.child_dev[i];
> +
> +		if ((p_child->common.dvo_port == port_mapping[port].dp ||
> +		     p_child->common.dvo_port == port_mapping[port].hdmi) &&
> +		    (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) ==
> +		    (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
>   /**
>    * intel_bios_is_dsi_present - is DSI present in VBT
>    * @dev_priv:	i915 device instance
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index c4d93e6b4bed..6b52c6accf6a 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1396,16 +1396,38 @@ intel_hdmi_unset_edid(struct drm_connector *connector)
>   }
>
>   static void
> -intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector)
> +intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
>   {
>   	struct drm_i915_private *dev_priv = to_i915(connector->dev);
>   	struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
> +	enum port port = hdmi_to_dig_port(hdmi)->port;
>   	struct i2c_adapter *adapter =
>   		intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
>   	enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
>
> -	if (type == DRM_DP_DUAL_MODE_NONE ||
> -	    type == DRM_DP_DUAL_MODE_UNKNOWN)
> +	/*
> +	 * Type 1 DVI adaptors are not required to implement any
> +	 * registers, so we can't always detect their presence.
> +	 * Ideally we should be able to check the state of the
> +	 * CONFIG1 pin, but no such luck on our hardware.
> +	 *
> +	 * The only method left to us is to check the VBT to see
> +	 * if the port is a dual mode capable DP port. But let's
> +	 * only do that when we sucesfully read the EDID, to avoid
> +	 * confusing log messages about DP dual mode adaptors when
> +	 * there's nothing connected to the port.
> +	 */
> +	if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
> +		if (has_edid &&
> +		    intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
> +			DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
> +			type = DRM_DP_DUAL_MODE_TYPE1_DVI;
> +		} else {
> +			type = DRM_DP_DUAL_MODE_NONE;
> +		}
> +	}
> +
> +	if (type == DRM_DP_DUAL_MODE_NONE)
>   		return;
>
>   	hdmi->dp_dual_mode.type = type;
> @@ -1432,7 +1454,7 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force)
>   				    intel_gmbus_get_adapter(dev_priv,
>   				    intel_hdmi->ddc_bus));
>
> -		intel_hdmi_dp_dual_mode_detect(connector);
> +		intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
>
>   		intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
>   	}
> diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h
> index a4a42f254c35..4f9799f025a9 100644
> --- a/drivers/gpu/drm/i915/intel_vbt_defs.h
> +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h
> @@ -746,6 +746,7 @@ struct bdb_psr {
>   #define	 DEVICE_TYPE_INT_TV	0x1009
>   #define	 DEVICE_TYPE_HDMI	0x60D2
>   #define	 DEVICE_TYPE_DP		0x68C6
> +#define	 DEVICE_TYPE_DP_DUAL_MODE	0x60D6
>   #define	 DEVICE_TYPE_eDP	0x78C6
>
>   #define  DEVICE_TYPE_CLASS_EXTENSION	(1 << 15)
> @@ -780,6 +781,17 @@ struct bdb_psr {
>   	 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
>   	 DEVICE_TYPE_ANALOG_OUTPUT)
>
> +#define DEVICE_TYPE_DP_DUAL_MODE_BITS \
> +	(DEVICE_TYPE_INTERNAL_CONNECTOR | \
> +	 DEVICE_TYPE_MIPI_OUTPUT | \
> +	 DEVICE_TYPE_COMPOSITE_OUTPUT | \
> +	 DEVICE_TYPE_LVDS_SINGALING | \
> +	 DEVICE_TYPE_TMDS_DVI_SIGNALING | \
> +	 DEVICE_TYPE_VIDEO_SIGNALING | \
> +	 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
> +	 DEVICE_TYPE_DIGITAL_OUTPUT | \
> +	 DEVICE_TYPE_ANALOG_OUTPUT)
> +
>   /* define the DVO port for HDMI output type */
>   #define		DVO_B		1
>   #define		DVO_C		2
>


More information about the dri-devel mailing list