Question regarding clocks in the DW-HDMI DT bindings

[Fabio Estevam]

On Thu, Nov 24, 2016 at 8:16 PM, Vladimir Zapolskiy
<vladimir_zapolskiy at mentor.com> wrote:

> correct, for your convenience the table is copied below:
>
> Clock name |     Clock Root     | Description
> -----------+--------------------+---------------------------------------
>   iahbclk  | ahb_clk_root       | Bus clock
>   icecclk  | ckil_sync_clk_root | CEC low-frequency clock (32kHZ)
>   ihclk    | ahb_clk_root       | Module clock
>   isfrclk  | video_27m_clk_root | Internal SFR clock (video clock 27MHz)
>
> Here AHB stands for ARM Advanced High-performance Bus.
>
> By the way while we're discussing DW HDMI bindings specific to iMX,
> I would recommend to remove utterly hackish and iMX only "gpr"
> property from the example in bindings/display/bridge/dw_hdmi.txt

Yes, the "gpr" property is i.MX specific and it is described in
Documentation/devicetree/bindings/display/imx/hdmi.txt, so we can
remove it from dw_hdmi.txt.

Will send a patch removing it. Thanks