[PATCHv4] drm/sun4i: validate modes for HDMI

[Hans Verkuil]

On 19/12/17 11:05, Daniel Vetter wrote:
> On Mon, Dec 18, 2017 at 08:50:46AM +0100, Maxime Ripard wrote:
>> Hi,
>>
>> On Fri, Dec 15, 2017 at 06:06:32PM +0100, Daniel Vetter wrote:
>>> On Fri, Dec 15, 2017 at 05:46:19PM +0100, Hans Verkuil wrote:
>>>> When I connected my cubieboard running 4.15-rc1 to my 4k display I got no picture. Some
>>>> digging found that there is no check against the upper pixelclock limit of the HDMI
>>>> output, so X selects a 4kp60 format at 594 MHz, which obviously won't work.
>>>>
>>>> The patch below adds a check for the upper bound of what this hardware can do, and
>>>> it checks if the requested tmds clock can be obtained.
>>>>
>>>> It also allows for the ± 0.5% pixel clock variation that the HDMI spec permits.
>>>>
>>>> That code is based on commit 22d0be2a557e53a22feb484e8fce255fe09e6ad5 from
>>>> Jose Abreu for drm/arc.
>>>>
>>>> Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
>>>> ---
>>>> Changes since v3:
>>>> - Move the mode_valid callback to struct drm_encoder_helper_funcs.
>>>>   I'm assuming this is the correct struct, since this check is specific to the
>>>>   hdmi encoder.
>>>
>>> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>>>
>>> I think sun4i is in drm-misc, so feel free to push.
>>
>> I already pushed the v3. Hans, can you provide an additional patch? on top of your v3?
> 
> Pretty sure I reviewed before you pushed, why should I bother?
> 
> Also, for people with commit rights it's imo better to let them push, to
> avoid such hiccups.
> 
> Thanks, Daniel
> 

Since I'm on vacation I would also very much appreciate it if you can take care of it,
Maxime. If not, then let me know and I'll try to whip up a v3-v4 patch for you.

Regards,

	Hans