[PATCH 3/3] drm/i915: Disable all planes for load detection, v2.
Daniel Vetter
daniel at ffwll.ch
Wed Dec 20 10:28:51 UTC 2017
On Wed, Dec 20, 2017 at 10:35:45AM +0100, Maarten Lankhorst wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> We don't need any active planes during load detection, so just disable
> them all. This saves us from having to come up with a suitable
> framebuffer. And we also avoid leaving sprite/cursor planes on and
> potentially presenting them at a peculiar location during the load
> detection.
>
> Changes since v1 (Maarten):
> - Add missing call to add_all_affected_planes.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Less code, I like. And I think we have enough load-detect machines (+ plus
the nasty igt to do it anywhere we still have native vga) to have
reasonable ensurance it actually works.
But maybe let's soak this in -next first for a while, then cherry-pick
over after a few weeks once it's solid.
With the missing Fixes: line added.
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_display.c | 147 +++++------------------------------
> 1 file changed, 18 insertions(+), 129 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 7e833268c9df..ef61f9a75c93 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9689,111 +9689,27 @@ intel_framebuffer_create(struct drm_i915_gem_object *obj,
> return ERR_PTR(ret);
> }
>
> -static u32
> -intel_framebuffer_pitch_for_width(int width, int bpp)
> -{
> - u32 pitch = DIV_ROUND_UP(width * bpp, 8);
> - return ALIGN(pitch, 64);
> -}
> -
> -static u32
> -intel_framebuffer_size_for_mode(const struct drm_display_mode *mode, int bpp)
> -{
> - u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
> - return PAGE_ALIGN(pitch * mode->vdisplay);
> -}
> -
> -static struct drm_framebuffer *
> -intel_framebuffer_create_for_mode(struct drm_device *dev,
> - const struct drm_display_mode *mode,
> - int depth, int bpp)
> -{
> - struct drm_framebuffer *fb;
> - struct drm_i915_gem_object *obj;
> - struct drm_mode_fb_cmd2 mode_cmd = { 0 };
> -
> - obj = i915_gem_object_create(to_i915(dev),
> - intel_framebuffer_size_for_mode(mode, bpp));
> - if (IS_ERR(obj))
> - return ERR_CAST(obj);
> -
> - mode_cmd.width = mode->hdisplay;
> - mode_cmd.height = mode->vdisplay;
> - mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
> - bpp);
> - mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
> -
> - fb = intel_framebuffer_create(obj, &mode_cmd);
> - if (IS_ERR(fb))
> - i915_gem_object_put(obj);
> -
> - return fb;
> -}
> -
> -static struct drm_framebuffer *
> -mode_fits_in_fbdev(struct drm_device *dev,
> - const struct drm_display_mode *mode)
> -{
> -#ifdef CONFIG_DRM_FBDEV_EMULATION
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct drm_i915_gem_object *obj;
> - struct drm_framebuffer *fb;
> -
> - if (!dev_priv->fbdev)
> - return NULL;
> -
> - if (!dev_priv->fbdev->fb)
> - return NULL;
> -
> - obj = dev_priv->fbdev->fb->obj;
> - BUG_ON(!obj);
> -
> - fb = &dev_priv->fbdev->fb->base;
> - if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
> - fb->format->cpp[0] * 8))
> - return NULL;
> -
> - if (obj->base.size < mode->vdisplay * fb->pitches[0])
> - return NULL;
> -
> - drm_framebuffer_get(fb);
> - return fb;
> -#else
> - return NULL;
> -#endif
> -}
> -
> -static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
> - struct drm_crtc *crtc,
> - const struct drm_display_mode *mode,
> - struct drm_framebuffer *fb,
> - int x, int y)
> +static int intel_modeset_disable_planes(struct drm_atomic_state *state,
> + struct drm_crtc *crtc)
> {
> + struct drm_plane *plane;
> struct drm_plane_state *plane_state;
> - int hdisplay, vdisplay;
> - int ret;
> -
> - plane_state = drm_atomic_get_plane_state(state, crtc->primary);
> - if (IS_ERR(plane_state))
> - return PTR_ERR(plane_state);
> -
> - if (mode)
> - drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
> - else
> - hdisplay = vdisplay = 0;
> + int ret, i;
>
> - ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
> + ret = drm_atomic_add_affected_planes(state, crtc);
> if (ret)
> return ret;
> - drm_atomic_set_fb_for_plane(plane_state, fb);
> - plane_state->crtc_x = 0;
> - plane_state->crtc_y = 0;
> - plane_state->crtc_w = hdisplay;
> - plane_state->crtc_h = vdisplay;
> - plane_state->src_x = x << 16;
> - plane_state->src_y = y << 16;
> - plane_state->src_w = hdisplay << 16;
> - plane_state->src_h = vdisplay << 16;
> +
> + for_each_new_plane_in_state(state, plane, plane_state, i) {
> + if (plane_state->crtc != crtc)
> + continue;
> +
> + ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
> + if (ret)
> + return ret;
> +
> + drm_atomic_set_fb_for_plane(plane_state, NULL);
> + }
>
> return 0;
> }
> @@ -9811,7 +9727,6 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
> struct drm_crtc *crtc = NULL;
> struct drm_device *dev = encoder->dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - struct drm_framebuffer *fb;
> struct drm_mode_config *config = &dev->mode_config;
> struct drm_atomic_state *state = NULL, *restore_state = NULL;
> struct drm_connector_state *connector_state;
> @@ -9879,10 +9794,6 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
> found:
> intel_crtc = to_intel_crtc(crtc);
>
> - ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
> - if (ret)
> - goto fail;
> -
> state = drm_atomic_state_alloc(dev);
> restore_state = drm_atomic_state_alloc(dev);
> if (!state || !restore_state) {
> @@ -9914,39 +9825,17 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
> if (!mode)
> mode = &load_detect_mode;
>
> - /* We need a framebuffer large enough to accommodate all accesses
> - * that the plane may generate whilst we perform load detection.
> - * We can not rely on the fbcon either being present (we get called
> - * during its initialisation to detect all boot displays, or it may
> - * not even exist) or that it is large enough to satisfy the
> - * requested mode.
> - */
> - fb = mode_fits_in_fbdev(dev, mode);
> - if (fb == NULL) {
> - DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
> - fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
> - } else
> - DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
> - if (IS_ERR(fb)) {
> - DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
> - ret = PTR_ERR(fb);
> - goto fail;
> - }
> -
> - ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
> - drm_framebuffer_put(fb);
> + ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
> if (ret)
> goto fail;
>
> - ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
> + ret = intel_modeset_disable_planes(state, crtc);
> if (ret)
> goto fail;
>
> ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
> if (!ret)
> ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
> - if (!ret)
> - ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
> if (ret) {
> DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
> goto fail;
> --
> 2.15.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list