[PATCH v2 2/2] dt-bindings: drm/bridge: Document Cadence DSI bridge bindings

[Tomi Valkeinen]

On 02/06/17 15:04, Boris Brezillon wrote:
> Document the bindings used for the Cadence DSI bridge.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> ---
>  .../bindings/display/bridge/cdns,dsi.txt           | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
> new file mode 100644
> index 000000000000..770c5c5b1e93
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
> @@ -0,0 +1,55 @@
> +Cadence DSI bridge
> +==================
> +
> +The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes.
> +
> +Required properties:
> +- compatible: should be set to "cdns,dsi".
> +- reg: physical base address and length of the controller's registers.
> +- interrupts: interrupt line connected to the DSI bridge.
> +- clocks: DSI bridge clocks.
> +- clock-names: must contain "pclk" and "sysclk".

clock-names doesn't match the example below.

> +- phys: phandle link to the MIPI D-PHY controller.
> +- phy-names: must contain "dphy".
> +- #address-cells: must be set to 1.
> +- #size-cells: must be set to 0.
> +
> +Required subnodes:
> +- ports: Ports as described in Documentation/devicetree/bindings/graph.txt.
> +  Currently contains a single input port at address 0 representing the DPI
> +  input. Other ports will be added later to support the SDI inputs.

Typo with "SDI".

 Tomi

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20170606/96ed27cf/attachment.sig>