[PATCH 3/9] gpu: ipu-v3: add driver for Prefetch Resolve Engine
Lucas Stach
l.stach at pengutronix.de
Fri Mar 3 18:25:39 UTC 2017
Am Montag, den 20.02.2017, 16:20 +0100 schrieb Philipp Zabel:
> On Fri, 2017-02-17 at 19:28 +0100, Lucas Stach wrote:
> > This adds support for the i.MX6 QuadPlus PRE units. Currently only
> > linear prefetch into SRAM is supported, other modes of operation
> > like the tiled-to-linear conversion will be added later.
> >
> > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > ---
> > drivers/gpu/ipu-v3/Makefile | 2 +-
> > drivers/gpu/ipu-v3/ipu-pre.c | 290
> > +++++++++++++++++++++++++++++++++++++++++++
> > drivers/gpu/ipu-v3/ipu-prv.h | 11 ++
> > 3 files changed, 302 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/gpu/ipu-v3/ipu-pre.c
> >
> > diff --git a/drivers/gpu/ipu-v3/Makefile b/drivers/gpu/ipu-
> > v3/Makefile
> > index 5f961416c4ee..8ae90de46b4d 100644
> > --- a/drivers/gpu/ipu-v3/Makefile
> > +++ b/drivers/gpu/ipu-v3/Makefile
> > @@ -2,4 +2,4 @@ obj-$(CONFIG_IMX_IPUV3_CORE) += imx-ipu-v3.o
> >
> > imx-ipu-v3-objs := ipu-common.o ipu-cpmem.o ipu-csi.o ipu-dc.o
> > ipu-di.o \
> > ipu-dp.o ipu-dmfc.o ipu-ic.o ipu-image-convert.o \
> > - ipu-smfc.o ipu-vdi.o
> > + ipu-pre.o ipu-smfc.o ipu-vdi.o
> > diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-
> > pre.c
> > new file mode 100644
> > index 000000000000..febe0cb8b094
> > --- /dev/null
> > +++ b/drivers/gpu/ipu-v3/ipu-pre.c
> > @@ -0,0 +1,290 @@
> > +/*
> > + * Copyright (c) 2017 Lucas Stach, Pengutronix
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify it
> > + * under the terms and conditions of the GNU General Public
> > License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> > MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> > License for
> > + * more details.
> > + */
> > +
> > +#include <drm/drm_fourcc.h>
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/genalloc.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <video/imx-ipu-v3.h>
> > +
> > +#include "ipu-prv.h"
> > +
> > +#define IPU_PRE_MAX_WIDTH 2048
> > +#define IPU_PRE_NUM_SCANLINES 8
> > +
> > +#define IPU_PRE_CTRL 0x000
> > +#define IPU_PRE_CTRL_SET 0x004
> > +#define IPU_PRE_CTRL_ENABLE (1 <<
> > 0)
>
> Single bit fields could use BIT(0) etc.
>
> > +#define IPU_PRE_CTRL_BLOCK_EN (1
> > << 1)
> > +#define IPU_PRE_CTRL_BLOCK_16 (1
> > << 2)
> > +#define IPU_PRE_CTRL_SDW_UPDATE (1 << 4)
> > +#define IPU_PRE_CTRL_VFLIP (1 <<
> > 5)
> > +#define IPU_PRE_CTRL_SO (1 << 6)
> > +#define IPU_PRE_CTRL_INTERLACED_FIELD (1
> > << 7)
> > +#define IPU_PRE_CTRL_HANDSHAKE_EN (1 << 8)
> > +#define IPU_PRE_CTRL_HANDSHAKE_LINE_NUM(v) ((v &
> > 0x3) << 9)
> > +#define IPU_PRE_CTRL_HANDSHAKE_ABORT_SKIP_EN (1 <<
> > 11)
> > +#define IPU_PRE_CTRL_EN_REPEAT (1
> > << 28)
> > +#define IPU_PRE_CTRL_TPR_REST_SEL (1 <<
> > 29)
> > +#define IPU_PRE_CTRL_CLKGATE (1 <<
> > 30)
> > +#define IPU_PRE_CTRL_SFTRST (1 <<
> > 31)
> > +
> > +#define IPU_PRE_CUR_BUF 0x0
> > 30
> > +
> > +#define IPU_PRE_NEXT_BUF 0x040
> > +
> > +#define IPU_PRE_TPR_CTRL 0x070
> > +#define IPU_PRE_TPR_CTRL_TILE_FORMAT(v) ((v &
> > 0xff) << 0)
> > +#define IPU_PRE_TPR_CTRL_TILE_FORMAT_MASK 0xff
> > +
> > +#define IPU_PRE_PREFETCH_ENG_CTRL 0x080
> > +#define IPU_PRE_PREF_ENG_CTRL_PREFETCH_EN (1 << 0)
> > +#define IPU_PRE_PREF_ENG_CTRL_RD_NUM_BYTES(v) ((v
> > & 0x7) << 1)
> > +#define IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(v) ((v &
> > 0x3) << 4)
> > +#define IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(v) ((v &
> > 0x7) << 8)
> > +#define IPU_PRE_PREF_ENG_CTRL_SHIFT_BYPASS (1 <<
> > 11)
> > +#define IPU_PRE_PREF_ENG_CTRL_FIELD_INVERSE (1 <<
> > 12)
> > +#define IPU_PRE_PREF_ENG_CTRL_PARTIAL_UV_SWAP (1
> > << 14)
> > +#define IPU_PRE_PREF_ENG_CTRL_TPR_COOR_OFFSET_EN (1 << 15)
> > +
> > +#define IPU_PRE_PREFETCH_ENG_INPUT_SIZE 0x0
> > a0
> > +#define IPU_PRE_PREFETCH_ENG_INPUT_SIZE_WIDTH(v) ((v &
> > 0xffff) << 0)
> > +#define IPU_PRE_PREFETCH_ENG_INPUT_SIZE_HEIGHT(v) ((v &
> > 0xffff) << 16)
> > +
> > +#define IPU_PRE_PREFETCH_ENG_PITCH 0x0d0
> > +#define IPU_PRE_PREFETCH_ENG_PITCH_Y(v) ((v &
> > 0xffff) << 0)
> > +#define IPU_PRE_PREFETCH_ENG_PITCH_UV(v) ((v &
> > 0xffff) << 16)
> > +
> > +#define IPU_PRE_STORE_ENG_CTRL 0x11
> > 0
> > +#define IPU_PRE_STORE_ENG_CTRL_STORE_EN (1 << 0)
> > +#define IPU_PRE_STORE_ENG_CTRL_WR_NUM_BYTES(v) ((v
> > & 0x7) << 1)
> > +#define IPU_PRE_STORE_ENG_CTRL_OUTPUT_ACTIVE_BPP(v) ((v &
> > 0x3) << 4)
> > +
> > +#define IPU_PRE_STORE_ENG_SIZE 0x13
> > 0
> > +#define IPU_PRE_STORE_ENG_SIZE_INPUT_WIDTH(v) ((v
> > & 0xffff) << 0)
> > +#define IPU_PRE_STORE_ENG_SIZE_INPUT_HEIGHT(v) ((v
> > & 0xffff) << 16)
> > +
> > +#define IPU_PRE_STORE_ENG_PITCH 0x1
> > 40
> > +#define IPU_PRE_STORE_ENG_PITCH_OUT_PITCH(v) ((v &
> > 0xffff) << 0)
> > +
> > +#define IPU_PRE_STORE_ENG_ADDR 0x15
> > 0
> > +
> > +struct ipu_pre {
> > + struct list_head list;
> > + struct device *dev;
> > +
> > + void __iomem *regs;
> > + struct clk *clk_axi;
> > + struct gen_pool *ocram;
> > +
> > + dma_addr_t buffer_paddr;
> > + void *buffer_virt;
> > + bool in_use;
> > +};
> > +
> > +static DEFINE_MUTEX(ipu_pre_list_mutex);
> > +static LIST_HEAD(ipu_pre_list);
> > +static int available_pres;
> > +
> > +int ipu_pre_get_available_count(void)
> > +{
> > + return available_pres;
> > +}
> > +
> > +struct ipu_pre *
> > +ipu_pre_get_by_prg_device(struct device *dev, int index)
>
> I'd call this ipu_pre_lookup_by_phandle and pass the device_node and
> property name string parameter.
> That way the name is better separated from ipu_pre_get ...
>
> > +{
> > + struct device_node *pre_node = of_parse_phandle(dev-
> > >of_node,
> > + "fsl,pres"
> > , index);
>
> ... and the PRG specific "fsl,pres" string could move into the PRG
> driver.
Good point, will do.
>
> > + struct ipu_pre *pre;
> > +
> > + mutex_lock(&ipu_pre_list_mutex);
> > + list_for_each_entry(pre, &ipu_pre_list, list) {
> > + if (pre_node == pre->dev->of_node) {
> > + mutex_unlock(&ipu_pre_list_mutex);
> > + device_link_add(dev, pre->dev,
> > DL_FLAG_AUTOREMOVE);
> > + return pre;
> > + }
> > + }
> > + mutex_unlock(&ipu_pre_list_mutex);
> > +
> > + return NULL;
> > +}
> > +
> > +int ipu_pre_get(struct ipu_pre *pre)
> > +{
> > + u32 val;
> > +
> > + if (pre->in_use)
> > + return -EBUSY;
>
> This could race for in_use ...
All the PRE/PRG configuration functions are thread unsafe, with the
premise that they are only used during an atomic commit, which is
inherently single threaded. I would rather like to avoid introducing
unnecessary thread safety here.
>
> > + clk_prepare_enable(pre->clk_axi);
> > +
> > + /* first get the engine out of reset and remove clock
> > gating */
> > + writel(0, pre->regs + IPU_PRE_CTRL);
> > +
> > + /* init defaults that should be applied to all streams */
> > + val = IPU_PRE_CTRL_HANDSHAKE_ABORT_SKIP_EN |
> > + IPU_PRE_CTRL_HANDSHAKE_EN |
> > + IPU_PRE_CTRL_TPR_REST_SEL |
> > + IPU_PRE_CTRL_BLOCK_16 | IPU_PRE_CTRL_SDW_UPDATE;
> > + writel(val, pre->regs + IPU_PRE_CTRL);
> > +
> > + pre->in_use = true;
>
> ... until here.
>
> > + return 0;
> > +}
> > +
> > +void ipu_pre_put(struct ipu_pre *pre)
> > +{
> > + u32 val;
> > +
> > + val = IPU_PRE_CTRL_SFTRST | IPU_PRE_CTRL_CLKGATE;
> > + writel(val, pre->regs + IPU_PRE_CTRL);
> > +
> > + clk_disable_unprepare(pre->clk_axi);
> > +
> > + pre->in_use = false;
> > +}
> > +
> > +void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
> > + unsigned int height, unsigned int stride,
> > u32 format,
> > + unsigned int bufaddr)
> > +{
> > + const struct drm_format_info *info =
> > drm_format_info(format);
> > + u32 active_bpp = info->cpp[0] >> 1;
> > + u32 val;
> > +
> > + writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF);
> > + writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
> > +
> > + val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) |
> > + IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) |
> > + IPU_PRE_PREF_ENG_CTRL_RD_NUM_BYTES(4) |
> > + IPU_PRE_PREF_ENG_CTRL_SHIFT_BYPASS |
> > + IPU_PRE_PREF_ENG_CTRL_PREFETCH_EN;
> > + writel(val, pre->regs + IPU_PRE_PREFETCH_ENG_CTRL);
> > +
> > + val = IPU_PRE_PREFETCH_ENG_INPUT_SIZE_WIDTH(width) |
> > + IPU_PRE_PREFETCH_ENG_INPUT_SIZE_HEIGHT(height);
> > + writel(val, pre->regs + IPU_PRE_PREFETCH_ENG_INPUT_SIZE);
> > +
> > + val = IPU_PRE_PREFETCH_ENG_PITCH_Y(stride);
> > + writel(val, pre->regs + IPU_PRE_PREFETCH_ENG_PITCH);
> > +
> > + val = IPU_PRE_STORE_ENG_CTRL_OUTPUT_ACTIVE_BPP(active_bpp)
> > |
> > + IPU_PRE_STORE_ENG_CTRL_WR_NUM_BYTES(4) |
> > + IPU_PRE_STORE_ENG_CTRL_STORE_EN;
> > + writel(val, pre->regs + IPU_PRE_STORE_ENG_CTRL);
> > +
> > + val = IPU_PRE_STORE_ENG_SIZE_INPUT_WIDTH(width) |
> > + IPU_PRE_STORE_ENG_SIZE_INPUT_HEIGHT(height);
> > + writel(val, pre->regs + IPU_PRE_STORE_ENG_SIZE);
> > +
> > + val = IPU_PRE_STORE_ENG_PITCH_OUT_PITCH(stride);
> > + writel(val, pre->regs + IPU_PRE_STORE_ENG_PITCH);
> > +
> > + writel(pre->buffer_paddr, pre->regs +
> > IPU_PRE_STORE_ENG_ADDR);
> > +
> > + val = readl(pre->regs + IPU_PRE_CTRL);
> > + val |= IPU_PRE_CTRL_EN_REPEAT | IPU_PRE_CTRL_ENABLE |
> > + IPU_PRE_CTRL_SDW_UPDATE;
> > + writel(val, pre->regs + IPU_PRE_CTRL);
> > +}
> > +
> > +void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr)
> > +{
> > + writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
> > + writel(IPU_PRE_CTRL_SDW_UPDATE, pre->regs +
> > IPU_PRE_CTRL_SET);
> > +}
> > +
> > +u32 ipu_pre_get_baddr(struct ipu_pre *pre)
> > +{
> > + return (u32)pre->buffer_paddr;
> > +}
> > +
> > +static int ipu_pre_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct resource *res;
> > + struct ipu_pre *pre;
> > +
> > + pre = devm_kzalloc(dev, sizeof(*pre), GFP_KERNEL);
> > + if (!pre)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + pre->regs = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(pre->regs))
> > + return PTR_ERR(pre->regs);
> > +
> > + pre->clk_axi = devm_clk_get(dev, "axi");
> > + if (IS_ERR(pre->clk_axi))
> > + return PTR_ERR(pre->clk_axi);
> > +
> > + pre->ocram = of_gen_pool_get(dev->of_node, "fsl,ocram",
> > 0);
> > + if (!pre->ocram)
> > + return -EPROBE_DEFER;
>
> I'd call this iram, from the point of view of the PRE.
>
> > +
> > + /*
> > + * Allocate OCRAM buffer with maximum size. This could be
> > made dynamic,
> > + * but as there is no other user of this OCRAM region and
> > we can fit all
> > + * max sized buffers into it, there is no need yet.
> > + */
> > + pre->buffer_virt = gen_pool_dma_alloc(pre->ocram,
> > IPU_PRE_MAX_WIDTH *
> > + IPU_PRE_NUM_SCANLINE
> > S * 4,
> > + &pre->buffer_paddr);
> > + if (!pre->buffer_virt)
> > + return -ENOMEM;
> > +
> > + pre->dev = dev;
> > + platform_set_drvdata(pdev, pre);
> > + mutex_lock(&ipu_pre_list_mutex);
> > + list_add(&pre->list, &ipu_pre_list);
> > + available_pres++;
> > + mutex_unlock(&ipu_pre_list_mutex);
> > +
> > + return 0;
> > +}
> > +
> > +static int ipu_pre_remove(struct platform_device *pdev)
> > +{
> > + struct ipu_pre *pre = platform_get_drvdata(pdev);
> > +
> > + mutex_lock(&ipu_pre_list_mutex);
> > + list_del(&pre->list);
> > + available_pres--;
> > + mutex_unlock(&ipu_pre_list_mutex);
> > +
> > + if (pre->buffer_virt)
> > + gen_pool_free(pre->ocram, (unsigned long)pre-
> > >buffer_virt,
> > + IPU_PRE_MAX_WIDTH *
> > IPU_PRE_NUM_SCANLINES * 4);
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id ipu_pre_dt_ids[] = {
> > + { .compatible = "fsl,imx6qp-pre", },
> > + { /* sentinel */ },
> > +};
> > +
> > +static struct platform_driver ipu_pre_drv = {
> > + .probe = ipu_pre_probe,
> > + .remove = ipu_pre_remove,
> > + .driver = {
> > + .name = "imx-ipu-pre",
> > + .of_match_table = ipu_pre_dt_ids,
> > + },
> > +};
> > +module_platform_driver(ipu_pre_drv);
> > diff --git a/drivers/gpu/ipu-v3/ipu-prv.h b/drivers/gpu/ipu-v3/ipu-
> > prv.h
> > index 22e47b68b14a..536a156a5eb6 100644
> > --- a/drivers/gpu/ipu-v3/ipu-prv.h
> > +++ b/drivers/gpu/ipu-v3/ipu-prv.h
> > @@ -168,6 +168,7 @@ struct ipu_ic_priv;
> > struct ipu_vdi;
> > struct ipu_image_convert_priv;
> > struct ipu_smfc_priv;
> > +struct ipu_pre;
> >
> > struct ipu_devtype;
> >
> > @@ -259,4 +260,14 @@ void ipu_cpmem_exit(struct ipu_soc *ipu);
> > int ipu_smfc_init(struct ipu_soc *ipu, struct device *dev,
> > unsigned long base);
> > void ipu_smfc_exit(struct ipu_soc *ipu);
> >
> > +struct ipu_pre *ipu_pre_get_by_prg_device(struct device *dev, int
> > index);
> > +int ipu_pre_get_available_count(void);
> > +int ipu_pre_get(struct ipu_pre *pre);
> > +void ipu_pre_put(struct ipu_pre *pre);
> > +u32 ipu_pre_get_baddr(struct ipu_pre *pre);
> > +void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
> > + unsigned int height,
> > + unsigned int stride, u32 format, unsigned
> > int bufaddr);
> > +void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr);
> > +
> > #endif /* __IPU_PRV_H__ */
>
> regards
> Philipp
>
More information about the dri-devel
mailing list