[PATCH 6/7] arm64: dts: renesas: eagle: Add LVDS decoder

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri Apr 6 13:49:23 UTC 2018


Hi Jacopo,

Thank you for the patch.

On Friday, 6 April 2018 16:08:11 EEST Jacopo Mondi wrote:
> The R-Car V3M Eagle board includes a transparent THC63LVD1024 LVDS
> decoder, connected to the on-chip LVDS encoder output on one side
> and to the not-yet-described HDMI encoder ADV7511W on the other one.
> 
> As the decoder does not need any configuration it has been so-far
> omitted from DTS. Now that a driver is available, describe it in DT
> as well.

As explained in my review of patch 5/7, I'd merge 5/7, 6/7 and 7/7 all 
together as there's little use for enabling the LVDS decoder if there's 
nothing connected at its output. Note also how this patch alone, without 7/7, 
wouldn't comply with the LVDS decoder DT bindings that state that port at 2 is 
mandatory.

> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 29 +++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 144b847..9d0e65d
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -31,6 +31,23 @@
>  		/* first 128MB is reserved for secure area. */
>  		reg = <0x0 0x48000000 0x0 0x38000000>;
>  	};
> +
> +	thc63lvd1024: lvds-decoder {
> +		compatible = "thine,thc63lvd1024";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;
> +
> +				thc63lvd1024_in: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +		};
> +	};
>  };
> 
>  &avb {
> @@ -104,3 +121,15 @@
>  	pinctrl-names = "default";
>  	status = "okay";
>  };
> +
> +&lvds0 {
> +	status = "okay";
> +
> +	ports {
> +		port at 1 {
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&thc63lvd1024_in>;
> +			};
> +		};
> +	};
> +};

-- 
Regards,

Laurent Pinchart





More information about the dri-devel mailing list