[PATCH 7/7] arm64: dts: renesas: eagle: Add ADV7511W and HDMI output
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Fri Apr 6 13:51:11 UTC 2018
Hi Jacopo,
Thank you for the patch.
On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> From: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
>
> Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> to THC63LVD1024 LVDS decoder output.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> ---
> arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
> 1 file changed, 50 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -32,6 +32,17 @@
> reg = <0x0 0x48000000 0x0 0x38000000>;
> };
>
> + hdmi-out {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_out: endpoint {
> + remote-endpoint = <&adv7511_out>;
> + };
> + };
> + };
> +
> thc63lvd1024: lvds-decoder {
> compatible = "thine,thc63lvd1024";
>
> @@ -41,11 +52,17 @@
>
> port at 0 {
> reg = <0>;
> -
This is unrelated, if you don't want a blank line here remove it from patch
6/7 :-)
> thc63lvd1024_in: endpoint {
> remote-endpoint = <&lvds0_out>;
> };
> };
> +
> + port at 2 {
> + reg = <2>;
> + thc63lvd1024_out: endpoint {
> + remote-endpoint = <&adv7511_in>;
> + };
> + };
> };
> };
> };
> @@ -85,6 +102,38 @@
> gpio-controller;
> #gpio-cells = <2>;
> };
> +
> + hdmi at 39 {
> + compatible = "adi,adv7511w";
> + reg = <0x39>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> +
> + adi,input-depth = <8>;
> + adi,input-colorspace = "rgb";
> + adi,input-clock = "1x";
> + adi,input-style = <1>;
> + adi,input-justification = "evenly";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + adv7511_in: endpoint {
> + remote-endpoint = <&thc63lvd1024_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + adv7511_out: endpoint {
> + remote-endpoint = <&hdmi_con_out>;
> + };
> + };
> + };
> + };
> };
>
> &pfc {
With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list