[PATCH] drm/vc4: Add some missing HVS register definitions.
Stefan Schake
stschake at gmail.com
Wed Apr 11 08:58:37 UTC 2018
On Sat, Mar 3, 2018 at 12:03 AM, Eric Anholt <eric at anholt.net> wrote:
> At least the RGBA expand field we should have been setting, because we
> aren't expanding correctly for 565 -> 8888. Other registers are ones
> that may be interesting for various projects that have been discussed.
>
> Signed-off-by: Eric Anholt <eric at anholt.net>
> Cc: Stefan Schake <stschake at gmail.com>
> ---
> drivers/gpu/drm/vc4/vc4_regs.h | 96 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
> index b9749cb24063..ce8bb7486456 100644
> --- a/drivers/gpu/drm/vc4/vc4_regs.h
> +++ b/drivers/gpu/drm/vc4/vc4_regs.h
> @@ -330,6 +330,21 @@
> #define SCALER_DISPCTRL0 0x00000040
> # define SCALER_DISPCTRLX_ENABLE BIT(31)
> # define SCALER_DISPCTRLX_RESET BIT(30)
> +/* Generates a single frame when VSTART is seen and stops at the last
> + * pixel read from the FIFO.
> + */
> +# define SCALER_DISPCTRLX_ONESHOT BIT(29)
> +/* Processes a single context in the dlist and then task switch,
> + * instead of an entire line.
> + */
> +# define SCALER_DISPCTRLX_ONECTX BIT(28)
> +/* Set to have DISPSLAVE return 2 16bpp pixels and no status data. */
> +# define SCALER_DISPCTRLX_FIFO32 BIT(27)
> +/* Turns on output to the DISPSLAVE register instead of the normal
> + * FIFO.
> + */
> +# define SCALER_DISPCTRLX_FIFOREG BIT(26)
> +
> # define SCALER_DISPCTRLX_WIDTH_MASK VC4_MASK(23, 12)
> # define SCALER_DISPCTRLX_WIDTH_SHIFT 12
> # define SCALER_DISPCTRLX_HEIGHT_MASK VC4_MASK(11, 0)
> @@ -402,6 +417,68 @@
> */
> # define SCALER_GAMADDR_SRAMENB BIT(30)
>
> +#define SCALER_OLEDOFFS 0x00000080
> +/* Clamps R to [16,235] and G/B to [16,240]. */
> +# define SCALER_OLEDOFFS_YUVCLAMP BIT(31)
> +
> +/* Chooses which display FIFO the matrix applies to. */
> +# define SCALER_OLEDOFFS_DISPFIFO_MASK VC4_MASK(25, 24)
> +# define SCALER_OLEDOFFS_DISPFIFO_SHIFT 24
> +# define SCALER_OLEDOFFS_DISPFIFO_DISABLED 0
> +# define SCALER_OLEDOFFS_DISPFIFO_0 1
> +# define SCALER_OLEDOFFS_DISPFIFO_1 2
> +# define SCALER_OLEDOFFS_DISPFIFO_2 3
> +
> +/* Offsets are 8-bit 2s-complement. */
> +# define SCALER_OLEDOFFS_RED_MASK VC4_MASK(23, 16)
> +# define SCALER_OLEDOFFS_RED_SHIFT 16
> +# define SCALER_OLEDOFFS_GREEN_MASK VC4_MASK(15, 8)
> +# define SCALER_OLEDOFFS_GREEN_SHIFT 8
> +# define SCALER_OLEDOFFS_BLUE_MASK VC4_MASK(7, 0)
> +# define SCALER_OLEDOFFS_BLUE_SHIFT 0
> +
> +/* The coefficients are S0.9 fractions. */
> +#define SCALER_OLEDCOEF0 0x00000084
> +# define SCALER_OLEDCOEF0_B_TO_R_MASK VC4_MASK(29, 20)
> +# define SCALER_OLEDCOEF0_B_TO_R_SHIFT 20
> +# define SCALER_OLEDCOEF0_B_TO_G_MASK VC4_MASK(19, 10)
> +# define SCALER_OLEDCOEF0_B_TO_G_SHIFT 10
> +# define SCALER_OLEDCOEF0_B_TO_B_MASK VC4_MASK(9, 0)
> +# define SCALER_OLEDCOEF0_B_TO_B_SHIFT 0
> +
> +#define SCALER_OLEDCOEF1 0x00000088
> +# define SCALER_OLEDCOEF1_G_TO_R_MASK VC4_MASK(29, 20)
> +# define SCALER_OLEDCOEF1_G_TO_R_SHIFT 20
> +# define SCALER_OLEDCOEF1_G_TO_G_MASK VC4_MASK(19, 10)
> +# define SCALER_OLEDCOEF1_G_TO_G_SHIFT 10
> +# define SCALER_OLEDCOEF1_G_TO_B_MASK VC4_MASK(9, 0)
> +# define SCALER_OLEDCOEF1_G_TO_B_SHIFT 0
> +
> +#define SCALER_OLEDCOEF2 0x0000008c
> +# define SCALER_OLEDCOEF2_R_TO_R_MASK VC4_MASK(29, 20)
> +# define SCALER_OLEDCOEF2_R_TO_R_SHIFT 20
> +# define SCALER_OLEDCOEF2_R_TO_G_MASK VC4_MASK(19, 10)
> +# define SCALER_OLEDCOEF2_R_TO_G_SHIFT 10
> +# define SCALER_OLEDCOEF2_R_TO_B_MASK VC4_MASK(9, 0)
> +# define SCALER_OLEDCOEF2_R_TO_B_SHIFT 0
> +
> +/* Slave addresses for DMAing from HVS composition output to other
> + * devices. The top bits are valid only in !FIFO32 mode.
> + */
> +#define SCALER_DISPSLAVE0 0x000000c0
> +#define SCALER_DISPSLAVE1 0x000000c9
> +#define SCALER_DISPSLAVE2 0x000000d0
> +# define SCALER_DISPSLAVE_ISSUE_VSTART BIT(31)
> +# define SCALER_DISPSLAVE_ISSUE_HSTART BIT(30)
> +/* Set when the current line has been read and an HSTART is required. */
> +# define SCALER_DISPSLAVE_EOL BIT(26)
> +/* Set when the display FIFO is empty. */
> +# define SCALER_DISPSLAVE_EMPTY BIT(25)
> +/* Set when there is RGB data ready to read. */
> +# define SCALER_DISPSLAVE_VALID BIT(24)
> +# define SCALER_DISPSLAVE_RGB_MASK VC4_MASK(23, 0)
> +# define SCALER_DISPSLAVE_RGB_SHIFT 0
> +
> #define SCALER_GAMDATA 0x000000e0
> #define SCALER_DLIST_START 0x00002000
> #define SCALER_DLIST_SIZE 0x00004000
> @@ -767,6 +844,10 @@ enum hvs_pixel_format {
> HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE = 9,
> HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE = 10,
> HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE = 11,
> + HVS_PIXEL_FORMAT_H264 = 12,
> + HVS_PIXEL_FORMAT_PALETTE = 13,
> + HVS_PIXEL_FORMAT_YUV444_RGB = 14,
> + HVS_PIXEL_FORMAT_AYUV444_RGB = 15,
> };
>
> /* Note: the LSB is the rightmost character shown. Only valid for
> @@ -800,12 +881,27 @@ enum hvs_pixel_format {
> #define SCALER_CTL0_TILING_128B 2
> #define SCALER_CTL0_TILING_256B_OR_T 3
>
> +#define SCALER_CTL0_ALPHA_MASK BIT(19)
> #define SCALER_CTL0_HFLIP BIT(16)
> #define SCALER_CTL0_VFLIP BIT(15)
>
> +#define SCALER_CTL0_KEY_MODE_MASK VC4_MASK(18, 17)
> +#define SCALER_CTL0_KEY_MODE_SHIFT 17
> +#define SCALER_CTL0_KEY_DISABLED 0
> +#define SCALER_CTL0_KEY_LUMA_OR_COMMON_RGB 1
> +#define SCALER_CTL0_KEY_MATCH 2 /* turn transparent */
> +#define SCALER_CTL0_KEY_REPLACE 3 /* replace with value from key mask word 2 */
> +
> #define SCALER_CTL0_ORDER_MASK VC4_MASK(14, 13)
> #define SCALER_CTL0_ORDER_SHIFT 13
>
> +#define SCALER_CTL0_RGBA_EXPAND_MASK VC4_MASK(12, 11)
> +#define SCALER_CTL0_RGBA_EXPAND_SHIFT 11
> +#define SCALER_CTL0_RGBA_EXPAND_ZERO 0
> +#define SCALER_CTL0_RGBA_EXPAND_LSB 1
> +#define SCALER_CTL0_RGBA_EXPAND_MSB 2
> +#define SCALER_CTL0_RGBA_EXPAND_ROUND 3
> +
> #define SCALER_CTL0_SCL1_MASK VC4_MASK(10, 8)
> #define SCALER_CTL0_SCL1_SHIFT 8
>
> --
> 2.16.2
>
Acked-by: Stefan Schake <stschake at gmail.com>
Since the generic plane alpha series is close to going in, we might also
want the alpha mix bit in SCALER_POS2 (bit 28). But we can always do that
as part of an actual series implementing plane alpha.
More information about the dri-devel
mailing list