[PATCH] gpu: drm: bridge: adv7511: Replace mdelay with usleep_range in adv7511_probe

[Laurent Pinchart]

Hi Jia-Ju,

Thank you for the patch.

On Wednesday, 11 April 2018 11:33:42 EEST Jia-Ju Bai wrote:
> adv7511_probe() is never called in atomic context.
> This function is only set as ".probe" in struct i2c_driver.
> 
> Despite never getting called from atomic context, adv7511_probe()
> calls mdelay() to busily wait.
> This is not necessary and can be replaced with usleep_range() to
> avoid busy waiting.
> 
> This is found by a static analysis tool named DCNS written by myself.
> And I also manually check it.

Nice work ! Is the tool open-source ?

> Signed-off-by: Jia-Ju Bai <baijiaju1990 at gmail.com>
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index b2431ae..2cf7fa1
> 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1054,7 +1054,7 @@ static int adv7511_probe(struct i2c_client *i2c, const
> struct i2c_device_id *id) }
> 
>  	if (adv7511->gpio_pd) {
> -		mdelay(5);
> +		usleep_range(5000, 6000);
>  		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>  	}

The patch looks good to me.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

-- 
Regards,

Laurent Pinchart