[PATCH v3 05/14] gpu: ipu-v3: Allow negative offsets for interlaced scanning

[Steve Longerbeam]

From: Philipp Zabel <p.zabel at pengutronix.de>

The IPU also supports interlaced buffers that start with the bottom field.
To achieve this, the the base address EBA has to be increased by a stride
length and the interlace offset ILO has to be set to the negative stride.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
---
 drivers/gpu/ipu-v3/ipu-cpmem.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c
index e68e473..8cd9e37 100644
--- a/drivers/gpu/ipu-v3/ipu-cpmem.c
+++ b/drivers/gpu/ipu-v3/ipu-cpmem.c
@@ -269,9 +269,20 @@ EXPORT_SYMBOL_GPL(ipu_cpmem_set_uv_offset);
 
 void ipu_cpmem_interlaced_scan(struct ipuv3_channel *ch, int stride)
 {
+	u32 ilo, sly;
+
+	if (stride < 0) {
+		stride = -stride;
+		ilo = 0x100000 - (stride / 8);
+	} else {
+		ilo = stride / 8;
+	}
+
+	sly = (stride * 2) - 1;
+
 	ipu_ch_param_write_field(ch, IPU_FIELD_SO, 1);
-	ipu_ch_param_write_field(ch, IPU_FIELD_ILO, stride / 8);
-	ipu_ch_param_write_field(ch, IPU_FIELD_SLY, (stride * 2) - 1);
+	ipu_ch_param_write_field(ch, IPU_FIELD_ILO, ilo);
+	ipu_ch_param_write_field(ch, IPU_FIELD_SLY, sly);
 };
 EXPORT_SYMBOL_GPL(ipu_cpmem_interlaced_scan);
 
-- 
2.7.4