[PATCH V4 3/8] backlight: qcom-wled: Add new properties for PMI8998

[Bjorn Andersson]

On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote:
> diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
[..]
>  - qcom,num-strings
>  	Usage:        optional
>  	Value type:   <u32>
>  	Definition:   #; number of led strings attached;
> -		      value from 1 to 3. default: 2
> -		      This property is supported only for PM8941.
> +		      value: For PM8941 from 1 to 3.
> +			     For PMI8998 from 1 to 4.
[..]
> +- qcom,enabled-strings
> +	Usage:        optional
> +	Value tyoe:   <u32 array>
> +	Definition:   Array of the WLED strings numbered from 0 to 3. Each
> +		      string of leds are operated individually. Specify the
> +		      list of strings used by the device. Any combination of
> +		      led strings can be used.
[..]
>  
>  Example:
>  
> @@ -99,4 +146,5 @@ pm8941-wled at d800 {
>  	qcom,switching-freq = <1600>;
>  	qcom,ovp = <29>;
>  	qcom,num-strings = <2>;
> +	qcom,enabled-strings = <0x00 0x01>;

Nit. I would assume that specifying qcom,num-strings = <2> implies that
the first 2 strings are used, so one would not also specify
qcom,enabled-strings.

(And you should use decimal for natural numbers)


Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>

Regards,
Bjorn