[PATCH 08/10] drm/etnaviv: handle security states
Lucas Stach
l.stach at pengutronix.de
Mon Jan 22 16:45:26 UTC 2018
GPUs with support for the security features need some additional
setup to get the frontend started.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 37 +++++++++++++++++++++++++++++++++--
1 file changed, 35 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index 08ee716f7b3c..ccd5d5ff7ffd 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -596,6 +596,12 @@ void etnaviv_gpu_start_fe(struct etnaviv_gpu *gpu, u32 address, u16 prefetch)
gpu_write(gpu, VIVS_FE_COMMAND_CONTROL,
VIVS_FE_COMMAND_CONTROL_ENABLE |
VIVS_FE_COMMAND_CONTROL_PREFETCH(prefetch));
+
+ if (gpu->sec_mode == ETNA_SEC_KERNEL) {
+ gpu_write(gpu, VIVS_MMUv2_SEC_COMMAND_CONTROL,
+ VIVS_MMUv2_SEC_COMMAND_CONTROL_ENABLE |
+ VIVS_MMUv2_SEC_COMMAND_CONTROL_PREFETCH(prefetch));
+ }
}
static void etnaviv_gpu_setup_pulse_eater(struct etnaviv_gpu *gpu)
@@ -669,6 +675,12 @@ static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu)
gpu_write(gpu, VIVS_MC_BUS_CONFIG, bus_config);
}
+ if (gpu->sec_mode == ETNA_SEC_KERNEL) {
+ u32 val = gpu_read(gpu, VIVS_MMUv2_AHB_CONTROL);
+ val |= VIVS_MMUv2_AHB_CONTROL_NONSEC_ACCESS;
+ gpu_write(gpu, VIVS_MMUv2_AHB_CONTROL, val);
+ }
+
/* setup the pulse eater */
etnaviv_gpu_setup_pulse_eater(gpu);
@@ -731,6 +743,14 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
gpu->identity.features &= ~chipFeatures_FAST_CLEAR;
}
+ /*
+ * On cores with security features supported, we claim control over the
+ * security states.
+ */
+ if ((gpu->identity.minor_features7 & chipMinorFeatures7_BIT_SECURITY) &&
+ (gpu->identity.minor_features10 & chipMinorFeatures10_SECURITY_AHB))
+ gpu->sec_mode = ETNA_SEC_KERNEL;
+
ret = etnaviv_hw_reset(gpu);
if (ret) {
dev_err(gpu->dev, "GPU reset failed\n");
@@ -1499,17 +1519,30 @@ static void sync_point_worker(struct work_struct *work)
static void dump_mmu_fault(struct etnaviv_gpu *gpu)
{
- u32 status = gpu_read(gpu, VIVS_MMUv2_STATUS);
+ u32 status_reg, status;
int i;
+ if (gpu->sec_mode == ETNA_SEC_NONE)
+ status_reg = VIVS_MMUv2_STATUS;
+ else
+ status_reg = VIVS_MMUv2_SEC_STATUS;
+
+ status = gpu_read(gpu, status_reg);
dev_err_ratelimited(gpu->dev, "MMU fault status 0x%08x\n", status);
for (i = 0; i < 4; i++) {
+ u32 address_reg;
+
if (!(status & (VIVS_MMUv2_STATUS_EXCEPTION0__MASK << (i * 4))))
continue;
+ if (gpu->sec_mode == ETNA_SEC_NONE)
+ address_reg = VIVS_MMUv2_EXCEPTION_ADDR(i);
+ else
+ address_reg = VIVS_MMUv2_SEC_EXCEPTION_ADDR;
+
dev_err_ratelimited(gpu->dev, "MMU %d fault addr 0x%08x\n", i,
- gpu_read(gpu, VIVS_MMUv2_EXCEPTION_ADDR(i)));
+ gpu_read(gpu, address_reg));
}
}
--
2.11.0
More information about the dri-devel
mailing list