[PATCH] drm/stm: dsi: Add 1.31 version support

Philippe Cornu philippe.cornu at st.com
Mon Jan 22 16:46:28 UTC 2018


Add support for the stm dsi phy/wrapper version 1.31.
Only lane capabilities need to be modified.

Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 39 +++++++++++++++++++++++++++--------
 1 file changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 0ba8635d738a..a514b593f37c 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -14,7 +14,14 @@
 #include <drm/bridge/dw_mipi_dsi.h>
 #include <video/mipi_display.h>
 
-/* DSI wrapper register & bit definitions */
+#define HWVER_130			0x31333000	/* IP version 1.30 */
+#define HWVER_131			0x31333100	/* IP version 1.31 */
+
+/* DSI digital registers & bit definitions */
+#define DSI_VERSION			0x00
+#define VERSION				GENMASK(31, 8)
+
+/* DSI wrapper registers & bit definitions */
 /* Note: registers are named as in the Reference Manual */
 #define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
 #define WCFGR_DSIM	BIT(0)		/* DSI Mode */
@@ -66,6 +73,9 @@ struct dw_mipi_dsi_stm {
 	void __iomem *base;
 	struct clk *pllref_clk;
 	struct dw_mipi_dsi *dsi;
+	u32 hw_version;
+	int lane_min_kbps;
+	int lane_max_kbps;
 };
 
 static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
@@ -122,7 +132,8 @@ static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
 	return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor);
 }
 
-static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
+static int dsi_pll_get_params(struct dw_mipi_dsi_stm *dsi,
+			      int clkin_khz, int clkout_khz,
 			      int *idf, int *ndiv, int *odf)
 {
 	int i, o, n, n_min, n_max;
@@ -132,8 +143,8 @@ static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
 	if (clkin_khz <= 0 || clkout_khz <= 0)
 		return -EINVAL;
 
-	fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
-	fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
+	fvco_min = dsi->lane_min_kbps * 2 * ODF_MAX;
+	fvco_max = dsi->lane_max_kbps * 2 * ODF_MIN;
 
 	best_delta = 1000000; /* big started value (1000000khz) */
 
@@ -213,6 +224,15 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
 	int ret, bpp;
 	u32 val;
 
+	/* Update lane capabilities according to hw version */
+	dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
+	dsi->lane_min_kbps = LANE_MIN_KBPS;
+	dsi->lane_max_kbps = LANE_MAX_KBPS;
+	if (dsi->hw_version == HWVER_131) {
+		dsi->lane_min_kbps *= 2;
+		dsi->lane_max_kbps *= 2;
+	}
+
 	pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
 
 	/* Compute requested pll out */
@@ -220,12 +240,12 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
 	pll_out_khz = mode->clock * bpp / lanes;
 	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
 	pll_out_khz = (pll_out_khz * 12) / 10;
-	if (pll_out_khz > LANE_MAX_KBPS) {
-		pll_out_khz = LANE_MAX_KBPS;
+	if (pll_out_khz > dsi->lane_max_kbps) {
+		pll_out_khz = dsi->lane_max_kbps;
 		DRM_WARN("Warning max phy mbps is used\n");
 	}
-	if (pll_out_khz < LANE_MIN_KBPS) {
-		pll_out_khz = LANE_MIN_KBPS;
+	if (pll_out_khz < dsi->lane_min_kbps) {
+		pll_out_khz = dsi->lane_min_kbps;
 		DRM_WARN("Warning min phy mbps is used\n");
 	}
 
@@ -233,7 +253,8 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
 	idf = 0;
 	ndiv = 0;
 	odf = 0;
-	ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
+	ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
+				 &idf, &ndiv, &odf);
 	if (ret)
 		DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
 
-- 
2.15.1



More information about the dri-devel mailing list