[PATCH v9 2/4] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings

[Stephen Boyd]

Quoting Rob Herring (2018-06-13 08:03:53)
> On Wed, Jun 13, 2018 at 5:08 AM, Sandeep Panda <spanda at codeaurora.org> wrote:
> > +Optional properties:
> > +- interrupts: Specifier for the SN65DSI86 interrupt line.
> > +
> > +- ddc-i2c-bus: phandle of the I2C controller used for DDC EDID probing
> > +
> > +- gpio-controller: Marks the device has a GPIO controller.
> > +- #gpio-cells    : Should be two. The first cell is the pin number and
> > +                   the second cell is used to specify flags.
> > +                   See ../../gpio/gpio.txt for more information.
> > +- #pwm-cells : Should be one. See ../../pwm/pwm.txt for description of
> > +               the cell formats.
> > +
> > +- clock-names: should be "refclk"
> > +- clocks: Specification for input reference clock. The reference
> > +         clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
> > +
> > +- data-lanes: Specification to describe the logical to physical lane
> > +             mapping scheme. See ../../media/video-interface.txt for more
> > +             information.
> > +- lane-polarities: Specification to describe the polarity of physical lanes.
> > +                  See ../../media/video-interface.txt for more information.
> 
> You are still defining the properties here. All you need is:
> 
> data-lanes: See ../../media/video-interface.txt
> 
> Perhaps you need to say should be 4 lanes, but OTOH everything tends
> to be 4 lanes.
> 

Maybe also indicate what logical to physical data lanes are being
remapped by saying something to the effect of "logical to physical DSI
lane mapping scheme".