[DPU PATCH 09/11] drm/msm/dpu: Remove unused code and move the header

ryadav at codeaurora.org ryadav at codeaurora.org
Fri Jun 22 17:39:05 UTC 2018


On 2018-06-22 21:03, Jordan Crouse wrote:
> On Fri, Jun 22, 2018 at 09:51:28AM -0400, Sean Paul wrote:
>> On Wed, May 30, 2018 at 10:50 AM Rajesh Yadav <ryadav at codeaurora.org> 
>> wrote:
>> >
>> > From: Jordan Crouse <jcrouse at codeaurora.org>
>> >
>> > Remove unused code from dpu_io_util.c.  The functions are only
>> > used inside of the msm driver so remove the EXPORT_SYMBOL
>> > tags and move the header dpu_io_util.h from include/linux.
>> >
>> > Signed-off-by: Jordan Crouse <jcrouse at codeaurora.org>
>> > [ryadav at codeaurora.org: rebased and removed some extra unused code]
>> > Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
>> 
>> Hi Rajesh and Jordan,
>> I'm backporting this series for testing, and have found that the
>> mdss-pll driver uses both dpu_io_util and a bunch of functions/struct
>> members removed in this patchset. Do we anticipate having to add those
>> back for mdss-pll?
> 
> At some point in the distant past some of the downstream folks 
> discovered that
> they were using relatively similar functions so they decided to share 
> the code.
> The code originally lived in the display driver so it happened that the 
> exported
> code continued to be hosted there.
> 
> I'm not sure what the upstream status of the mdss-pll code is but I 
> can't
> imagine that sharing this code would be in the long term plan and even 
> if it
> was basic module guidelines would dictate that it would live with 
> mdss-pll
> which would be more likely to be either be built in or act as a 
> dependency for
> DPU.
> 
> Jordan

Hi Sean,
drivers/clk/qcom/mdss was needed for dsi-staging driver and can be 
safely dropped since we switched to upstream DSI driver.
Please drop the following change to address this issue (except for the 
driver/gpu/drm/msm/Kconfig):
https://gitlab.freedesktop.org/seanpaul/dpu-staging/commit/2e433b56489b3e53b9d89ce7bfa15fb4698c8c58
I had tested it on my side.

Thanks,
Rajesh

> 
>> > ---
>> >  drivers/gpu/drm/msm/dpu_io_util.c | 380 +-------------------------------------
>> >  drivers/gpu/drm/msm/dpu_io_util.h |  61 ++++++
>> >  drivers/gpu/drm/msm/msm_drv.h     |   1 -
>> >  include/linux/dpu_io_util.h       | 115 ------------
>> >  4 files changed, 66 insertions(+), 491 deletions(-)
>> >  create mode 100644 drivers/gpu/drm/msm/dpu_io_util.h
>> >  delete mode 100644 include/linux/dpu_io_util.h
>> >
>> > diff --git a/drivers/gpu/drm/msm/dpu_io_util.c b/drivers/gpu/drm/msm/dpu_io_util.c
>> > index ecc297c..f7caec3 100644
>> > --- a/drivers/gpu/drm/msm/dpu_io_util.c
>> > +++ b/drivers/gpu/drm/msm/dpu_io_util.c
>> > @@ -13,318 +13,9 @@
>> >
>> >  #include <linux/clk.h>
>> >  #include <linux/err.h>
>> > -#include <linux/io.h>
>> > -#include <linux/regulator/consumer.h>
>> >  #include <linux/delay.h>
>> > -#include <linux/dpu_io_util.h>
>> >
>> > -#define MAX_I2C_CMDS  16
>> > -void dss_reg_w(struct dss_io_data *io, u32 offset, u32 value, u32 debug)
>> > -{
>> > -       u32 in_val;
>> > -
>> > -       if (!io || !io->base) {
>> > -               DEV_ERR("%pS->%s: invalid input\n",
>> > -                       __builtin_return_address(0), __func__);
>> > -               return;
>> > -       }
>> > -
>> > -       if (offset > io->len) {
>> > -               DEV_ERR("%pS->%s: offset out of range\n",
>> > -                       __builtin_return_address(0), __func__);
>> > -               return;
>> > -       }
>> > -
>> > -       writel_relaxed(value, io->base + offset);
>> > -       if (debug) {
>> > -               in_val = readl_relaxed(io->base + offset);
>> > -               DEV_DBG("[%08x] => %08x [%08x]\n",
>> > -                       (u32)(unsigned long)(io->base + offset),
>> > -                       value, in_val);
>> > -       }
>> > -} /* dss_reg_w */
>> > -EXPORT_SYMBOL(dss_reg_w);
>> > -
>> > -u32 dss_reg_r(struct dss_io_data *io, u32 offset, u32 debug)
>> > -{
>> > -       u32 value;
>> > -
>> > -       if (!io || !io->base) {
>> > -               DEV_ERR("%pS->%s: invalid input\n",
>> > -                       __builtin_return_address(0), __func__);
>> > -               return -EINVAL;
>> > -       }
>> > -
>> > -       if (offset > io->len) {
>> > -               DEV_ERR("%pS->%s: offset out of range\n",
>> > -                       __builtin_return_address(0), __func__);
>> > -               return -EINVAL;
>> > -       }
>> > -
>> > -       value = readl_relaxed(io->base + offset);
>> > -       if (debug)
>> > -               DEV_DBG("[%08x] <= %08x\n",
>> > -                       (u32)(unsigned long)(io->base + offset), value);
>> > -
>> > -       return value;
>> > -} /* dss_reg_r */
>> > -EXPORT_SYMBOL(dss_reg_r);
>> > -
>> > -void dss_reg_dump(void __iomem *base, u32 length, const char *prefix,
>> > -       u32 debug)
>> > -{
>> > -       if (debug)
>> > -               print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_OFFSET, 32, 4,
>> > -                       (void *)base, length, false);
>> > -} /* dss_reg_dump */
>> > -EXPORT_SYMBOL(dss_reg_dump);
>> > -
>> > -static struct resource *msm_dss_get_res_byname(struct platform_device *pdev,
>> > -       unsigned int type, const char *name)
>> > -{
>> > -       struct resource *res = NULL;
>> > -
>> > -       res = platform_get_resource_byname(pdev, type, name);
>> > -       if (!res)
>> > -               DEV_ERR("%s: '%s' resource not found\n", __func__, name);
>> > -
>> > -       return res;
>> > -} /* msm_dss_get_res_byname */
>> > -EXPORT_SYMBOL(msm_dss_get_res_byname);
>> > -
>> > -int msm_dss_ioremap_byname(struct platform_device *pdev,
>> > -       struct dss_io_data *io_data, const char *name)
>> > -{
>> > -       struct resource *res = NULL;
>> > -
>> > -       if (!pdev || !io_data) {
>> > -               DEV_ERR("%pS->%s: invalid input\n",
>> > -                       __builtin_return_address(0), __func__);
>> > -               return -EINVAL;
>> > -       }
>> > -
>> > -       res = msm_dss_get_res_byname(pdev, IORESOURCE_MEM, name);
>> > -       if (!res) {
>> > -               DEV_ERR("%pS->%s: '%s' msm_dss_get_res_byname failed\n",
>> > -                       __builtin_return_address(0), __func__, name);
>> > -               return -ENODEV;
>> > -       }
>> > -
>> > -       io_data->len = (u32)resource_size(res);
>> > -       io_data->base = ioremap(res->start, io_data->len);
>> > -       if (!io_data->base) {
>> > -               DEV_ERR("%pS->%s: '%s' ioremap failed\n",
>> > -                       __builtin_return_address(0), __func__, name);
>> > -               return -EIO;
>> > -       }
>> > -
>> > -       return 0;
>> > -} /* msm_dss_ioremap_byname */
>> > -EXPORT_SYMBOL(msm_dss_ioremap_byname);
>> > -
>> > -void msm_dss_iounmap(struct dss_io_data *io_data)
>> > -{
>> > -       if (!io_data) {
>> > -               DEV_ERR("%pS->%s: invalid input\n",
>> > -                       __builtin_return_address(0), __func__);
>> > -               return;
>> > -       }
>> > -
>> > -       if (io_data->base) {
>> > -               iounmap(io_data->base);
>> > -               io_data->base = NULL;
>> > -       }
>> > -       io_data->len = 0;
>> > -} /* msm_dss_iounmap */
>> > -EXPORT_SYMBOL(msm_dss_iounmap);
>> > -
>> > -int msm_dss_config_vreg(struct device *dev, struct dss_vreg *in_vreg,
>> > -       int num_vreg, int config)
>> > -{
>> > -       int i = 0, rc = 0;
>> > -       struct dss_vreg *curr_vreg = NULL;
>> > -       enum dss_vreg_type type;
>> > -
>> > -       if (!in_vreg || !num_vreg)
>> > -               return rc;
>> > -
>> > -       if (config) {
>> > -               for (i = 0; i < num_vreg; i++) {
>> > -                       curr_vreg = &in_vreg[i];
>> > -                       curr_vreg->vreg = regulator_get(dev,
>> > -                               curr_vreg->vreg_name);
>> > -                       rc = PTR_RET(curr_vreg->vreg);
>> > -                       if (rc) {
>> > -                               DEV_ERR("%pS->%s: %s get failed. rc=%d\n",
>> > -                                        __builtin_return_address(0), __func__,
>> > -                                        curr_vreg->vreg_name, rc);
>> > -                               curr_vreg->vreg = NULL;
>> > -                               goto vreg_get_fail;
>> > -                       }
>> > -                       type = (regulator_count_voltages(curr_vreg->vreg) > 0)
>> > -                                       ? DSS_REG_LDO : DSS_REG_VS;
>> > -                       if (type == DSS_REG_LDO) {
>> > -                               rc = regulator_set_voltage(
>> > -                                       curr_vreg->vreg,
>> > -                                       curr_vreg->min_voltage,
>> > -                                       curr_vreg->max_voltage);
>> > -                               if (rc < 0) {
>> > -                                       DEV_ERR("%pS->%s: %s set vltg fail\n",
>> > -                                               __builtin_return_address(0),
>> > -                                               __func__,
>> > -                                               curr_vreg->vreg_name);
>> > -                                       goto vreg_set_voltage_fail;
>> > -                               }
>> > -                       }
>> > -               }
>> > -       } else {
>> > -               for (i = num_vreg-1; i >= 0; i--) {
>> > -                       curr_vreg = &in_vreg[i];
>> > -                       if (curr_vreg->vreg) {
>> > -                               type = (regulator_count_voltages(
>> > -                                       curr_vreg->vreg) > 0)
>> > -                                       ? DSS_REG_LDO : DSS_REG_VS;
>> > -                               if (type == DSS_REG_LDO) {
>> > -                                       regulator_set_voltage(curr_vreg->vreg,
>> > -                                               0, curr_vreg->max_voltage);
>> > -                               }
>> > -                               regulator_put(curr_vreg->vreg);
>> > -                               curr_vreg->vreg = NULL;
>> > -                       }
>> > -               }
>> > -       }
>> > -       return 0;
>> > -
>> > -vreg_unconfig:
>> > -if (type == DSS_REG_LDO)
>> > -       regulator_set_load(curr_vreg->vreg, 0);
>> > -
>> > -vreg_set_voltage_fail:
>> > -       regulator_put(curr_vreg->vreg);
>> > -       curr_vreg->vreg = NULL;
>> > -
>> > -vreg_get_fail:
>> > -       for (i--; i >= 0; i--) {
>> > -               curr_vreg = &in_vreg[i];
>> > -               type = (regulator_count_voltages(curr_vreg->vreg) > 0)
>> > -                       ? DSS_REG_LDO : DSS_REG_VS;
>> > -               goto vreg_unconfig;
>> > -       }
>> > -       return rc;
>> > -} /* msm_dss_config_vreg */
>> > -EXPORT_SYMBOL(msm_dss_config_vreg);
>> > -
>> > -int msm_dss_enable_vreg(struct dss_vreg *in_vreg, int num_vreg, int enable)
>> > -{
>> > -       int i = 0, rc = 0;
>> > -       bool need_sleep;
>> > -
>> > -       if (enable) {
>> > -               for (i = 0; i < num_vreg; i++) {
>> > -                       rc = PTR_RET(in_vreg[i].vreg);
>> > -                       if (rc) {
>> > -                               DEV_ERR("%pS->%s: %s regulator error. rc=%d\n",
>> > -                                       __builtin_return_address(0), __func__,
>> > -                                       in_vreg[i].vreg_name, rc);
>> > -                               goto vreg_set_opt_mode_fail;
>> > -                       }
>> > -                       need_sleep = !regulator_is_enabled(in_vreg[i].vreg);
>> > -                       if (in_vreg[i].pre_on_sleep && need_sleep)
>> > -                               usleep_range(in_vreg[i].pre_on_sleep * 1000,
>> > -                                       in_vreg[i].pre_on_sleep * 1000);
>> > -                       rc = regulator_set_load(in_vreg[i].vreg,
>> > -                               in_vreg[i].enable_load);
>> > -                       if (rc < 0) {
>> > -                               DEV_ERR("%pS->%s: %s set opt m fail\n",
>> > -                                       __builtin_return_address(0), __func__,
>> > -                                       in_vreg[i].vreg_name);
>> > -                               goto vreg_set_opt_mode_fail;
>> > -                       }
>> > -                       rc = regulator_enable(in_vreg[i].vreg);
>> > -                       if (in_vreg[i].post_on_sleep && need_sleep)
>> > -                               usleep_range(in_vreg[i].post_on_sleep * 1000,
>> > -                                       in_vreg[i].post_on_sleep * 1000);
>> > -                       if (rc < 0) {
>> > -                               DEV_ERR("%pS->%s: %s enable failed\n",
>> > -                                       __builtin_return_address(0), __func__,
>> > -                                       in_vreg[i].vreg_name);
>> > -                               goto disable_vreg;
>> > -                       }
>> > -               }
>> > -       } else {
>> > -               for (i = num_vreg-1; i >= 0; i--) {
>> > -                       if (in_vreg[i].pre_off_sleep)
>> > -                               usleep_range(in_vreg[i].pre_off_sleep * 1000,
>> > -                                       in_vreg[i].pre_off_sleep * 1000);
>> > -                       regulator_set_load(in_vreg[i].vreg,
>> > -                               in_vreg[i].disable_load);
>> > -                       regulator_disable(in_vreg[i].vreg);
>> > -                       if (in_vreg[i].post_off_sleep)
>> > -                               usleep_range(in_vreg[i].post_off_sleep * 1000,
>> > -                                       in_vreg[i].post_off_sleep * 1000);
>> > -               }
>> > -       }
>> > -       return rc;
>> > -
>> > -disable_vreg:
>> > -       regulator_set_load(in_vreg[i].vreg, in_vreg[i].disable_load);
>> > -
>> > -vreg_set_opt_mode_fail:
>> > -       for (i--; i >= 0; i--) {
>> > -               if (in_vreg[i].pre_off_sleep)
>> > -                       usleep_range(in_vreg[i].pre_off_sleep * 1000,
>> > -                               in_vreg[i].pre_off_sleep * 1000);
>> > -               regulator_set_load(in_vreg[i].vreg,
>> > -                       in_vreg[i].disable_load);
>> > -               regulator_disable(in_vreg[i].vreg);
>> > -               if (in_vreg[i].post_off_sleep)
>> > -                       usleep_range(in_vreg[i].post_off_sleep * 1000,
>> > -                               in_vreg[i].post_off_sleep * 1000);
>> > -       }
>> > -
>> > -       return rc;
>> > -} /* msm_dss_enable_vreg */
>> > -EXPORT_SYMBOL(msm_dss_enable_vreg);
>> > -
>> > -int msm_dss_enable_gpio(struct dss_gpio *in_gpio, int num_gpio, int enable)
>> > -{
>> > -       int i = 0, rc = 0;
>> > -
>> > -       if (enable) {
>> > -               for (i = 0; i < num_gpio; i++) {
>> > -                       DEV_DBG("%pS->%s: %s enable\n",
>> > -                               __builtin_return_address(0), __func__,
>> > -                               in_gpio[i].gpio_name);
>> > -
>> > -                       rc = gpio_request(in_gpio[i].gpio,
>> > -                               in_gpio[i].gpio_name);
>> > -                       if (rc < 0) {
>> > -                               DEV_ERR("%pS->%s: %s enable failed\n",
>> > -                                       __builtin_return_address(0), __func__,
>> > -                                       in_gpio[i].gpio_name);
>> > -                               goto disable_gpio;
>> > -                       }
>> > -                       gpio_set_value(in_gpio[i].gpio, in_gpio[i].value);
>> > -               }
>> > -       } else {
>> > -               for (i = num_gpio-1; i >= 0; i--) {
>> > -                       DEV_DBG("%pS->%s: %s disable\n",
>> > -                               __builtin_return_address(0), __func__,
>> > -                               in_gpio[i].gpio_name);
>> > -                       if (in_gpio[i].gpio)
>> > -                               gpio_free(in_gpio[i].gpio);
>> > -               }
>> > -       }
>> > -       return rc;
>> > -
>> > -disable_gpio:
>> > -       for (i--; i >= 0; i--)
>> > -               if (in_gpio[i].gpio)
>> > -                       gpio_free(in_gpio[i].gpio);
>> > -
>> > -       return rc;
>> > -} /* msm_dss_enable_gpio */
>> > -EXPORT_SYMBOL(msm_dss_enable_gpio);
>> > +#include "dpu_io_util.h"
>> >
>> >  void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk)
>> >  {
>> > @@ -335,8 +26,7 @@ void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk)
>> >                         clk_put(clk_arry[i].clk);
>> >                 clk_arry[i].clk = NULL;
>> >         }
>> > -} /* msm_dss_put_clk */
>> > -EXPORT_SYMBOL(msm_dss_put_clk);
>> > +}
>> >
>> >  int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk)
>> >  {
>> > @@ -363,8 +53,7 @@ int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk)
>> >         }
>> >
>> >         return rc;
>> > -} /* msm_dss_get_clk */
>> > -EXPORT_SYMBOL(msm_dss_get_clk);
>> > +}
>> >
>> >  int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk)
>> >  {
>> > @@ -397,8 +86,7 @@ int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk)
>> >         }
>> >
>> >         return rc;
>> > -} /* msm_dss_clk_set_rate */
>> > -EXPORT_SYMBOL(msm_dss_clk_set_rate);
>> > +}
>> >
>> >  int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable)
>> >  {
>> > @@ -445,8 +133,7 @@ int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable)
>> >         }
>> >
>> >         return rc;
>> > -} /* msm_dss_enable_clk */
>> > -EXPORT_SYMBOL(msm_dss_enable_clk);
>> > +}
>> >
>> >  int msm_dss_parse_clock(struct platform_device *pdev,
>> >                 struct dss_module_power *mp)
>> > @@ -497,60 +184,3 @@ int msm_dss_parse_clock(struct platform_device *pdev,
>> >
>> >         return rc;
>> >  }
>> > -
>> > -int dpu_i2c_byte_read(struct i2c_client *client, uint8_t slave_addr,
>> > -                       uint8_t reg_offset, uint8_t *read_buf)
>> > -{
>> > -       struct i2c_msg msgs[2];
>> > -       int ret = -1;
>> > -
>> > -       pr_debug("%s: reading from slave_addr=[%x] and offset=[%x]\n",
>> > -                __func__, slave_addr, reg_offset);
>> > -
>> > -       msgs[0].addr = slave_addr >> 1;
>> > -       msgs[0].flags = 0;
>> > -       msgs[0].buf = &reg_offset;
>> > -       msgs[0].len = 1;
>> > -
>> > -       msgs[1].addr = slave_addr >> 1;
>> > -       msgs[1].flags = I2C_M_RD;
>> > -       msgs[1].buf = read_buf;
>> > -       msgs[1].len = 1;
>> > -
>> > -       ret = i2c_transfer(client->adapter, msgs, 2);
>> > -       if (ret < 1) {
>> > -               pr_err("%s: I2C READ FAILED=[%d]\n", __func__, ret);
>> > -               return -EACCES;
>> > -       }
>> > -       pr_debug("%s: i2c buf is [%x]\n", __func__, *read_buf);
>> > -       return 0;
>> > -}
>> > -EXPORT_SYMBOL(dpu_i2c_byte_read);
>> > -
>> > -int dpu_i2c_byte_write(struct i2c_client *client, uint8_t slave_addr,
>> > -                       uint8_t reg_offset, uint8_t *value)
>> > -{
>> > -       struct i2c_msg msgs[1];
>> > -       uint8_t data[2];
>> > -       int status = -EACCES;
>> > -
>> > -       pr_debug("%s: writing from slave_addr=[%x] and offset=[%x]\n",
>> > -                __func__, slave_addr, reg_offset);
>> > -
>> > -       data[0] = reg_offset;
>> > -       data[1] = *value;
>> > -
>> > -       msgs[0].addr = slave_addr >> 1;
>> > -       msgs[0].flags = 0;
>> > -       msgs[0].len = 2;
>> > -       msgs[0].buf = data;
>> > -
>> > -       status = i2c_transfer(client->adapter, msgs, 1);
>> > -       if (status < 1) {
>> > -               pr_err("I2C WRITE FAILED=[%d]\n", status);
>> > -               return -EACCES;
>> > -       }
>> > -       pr_debug("%s: I2C write status=%x\n", __func__, status);
>> > -       return status;
>> > -}
>> > -EXPORT_SYMBOL(dpu_i2c_byte_write);
>> > diff --git a/drivers/gpu/drm/msm/dpu_io_util.h b/drivers/gpu/drm/msm/dpu_io_util.h
>> > new file mode 100644
>> > index 0000000..773b52e
>> > --- /dev/null
>> > +++ b/drivers/gpu/drm/msm/dpu_io_util.h
>> > @@ -0,0 +1,61 @@
>> > +/* Copyright (c) 2012, 2017-2018, The Linux Foundation. All rights reserved.
>> > + *
>> > + * This program is free software; you can redistribute it and/or modify
>> > + * it under the terms of the GNU General Public License version 2 and
>> > + * only version 2 as published by the Free Software Foundation.
>> > + *
>> > + * This program is distributed in the hope that it will be useful,
>> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> > + * GNU General Public License for more details.
>> > + */
>> > +
>> > +#ifndef __DPU_IO_UTIL_H__
>> > +#define __DPU_IO_UTIL_H__
>> > +
>> > +#include <linux/gpio.h>
>> > +#include <linux/platform_device.h>
>> > +#include <linux/types.h>
>> > +
>> > +#ifdef DEBUG
>> > +#define DEV_DBG(fmt, args...)   pr_err(fmt, ##args)
>> > +#else
>> > +#define DEV_DBG(fmt, args...)   pr_debug(fmt, ##args)
>> > +#endif
>> > +#define DEV_INFO(fmt, args...)  pr_info(fmt, ##args)
>> > +#define DEV_WARN(fmt, args...)  pr_warn(fmt, ##args)
>> > +#define DEV_ERR(fmt, args...)   pr_err(fmt, ##args)
>> > +
>> > +struct dss_gpio {
>> > +       unsigned int gpio;
>> > +       unsigned int value;
>> > +       char gpio_name[32];
>> > +};
>> > +
>> > +enum dss_clk_type {
>> > +       DSS_CLK_AHB, /* no set rate. rate controlled through rpm */
>> > +       DSS_CLK_PCLK,
>> > +};
>> > +
>> > +struct dss_clk {
>> > +       struct clk *clk; /* clk handle */
>> > +       char clk_name[32];
>> > +       enum dss_clk_type type;
>> > +       unsigned long rate;
>> > +       unsigned long max_rate;
>> > +};
>> > +
>> > +struct dss_module_power {
>> > +       unsigned int num_gpio;
>> > +       struct dss_gpio *gpio_config;
>> > +       unsigned int num_clk;
>> > +       struct dss_clk *clk_config;
>> > +};
>> > +
>> > +int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk);
>> > +void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk);
>> > +int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk);
>> > +int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable);
>> > +int msm_dss_parse_clock(struct platform_device *pdev,
>> > +               struct dss_module_power *mp);
>> > +#endif /* __DPU_IO_UTIL_H__ */
>> > diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
>> > index d5937ba..811f7d4 100644
>> > --- a/drivers/gpu/drm/msm/msm_drv.h
>> > +++ b/drivers/gpu/drm/msm/msm_drv.h
>> > @@ -33,7 +33,6 @@
>> >  #include <linux/types.h>
>> >  #include <linux/of_graph.h>
>> >  #include <linux/of_device.h>
>> > -#include <linux/dpu_io_util.h>
>> >  #include <asm/sizes.h>
>> >  #include <linux/kthread.h>
>> >
>> > diff --git a/include/linux/dpu_io_util.h b/include/linux/dpu_io_util.h
>> > deleted file mode 100644
>> > index 45e606f..0000000
>> > --- a/include/linux/dpu_io_util.h
>> > +++ /dev/null
>> > @@ -1,115 +0,0 @@
>> > -/* Copyright (c) 2012, 2017-2018, The Linux Foundation. All rights reserved.
>> > - *
>> > - * This program is free software; you can redistribute it and/or modify
>> > - * it under the terms of the GNU General Public License version 2 and
>> > - * only version 2 as published by the Free Software Foundation.
>> > - *
>> > - * This program is distributed in the hope that it will be useful,
>> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> > - * GNU General Public License for more details.
>> > - */
>> > -
>> > -#ifndef __DPU_IO_UTIL_H__
>> > -#define __DPU_IO_UTIL_H__
>> > -
>> > -#include <linux/gpio.h>
>> > -#include <linux/platform_device.h>
>> > -#include <linux/regulator/consumer.h>
>> > -#include <linux/i2c.h>
>> > -#include <linux/types.h>
>> > -
>> > -#ifdef DEBUG
>> > -#define DEV_DBG(fmt, args...)   pr_err(fmt, ##args)
>> > -#else
>> > -#define DEV_DBG(fmt, args...)   pr_debug(fmt, ##args)
>> > -#endif
>> > -#define DEV_INFO(fmt, args...)  pr_info(fmt, ##args)
>> > -#define DEV_WARN(fmt, args...)  pr_warn(fmt, ##args)
>> > -#define DEV_ERR(fmt, args...)   pr_err(fmt, ##args)
>> > -
>> > -struct dss_io_data {
>> > -       u32 len;
>> > -       void __iomem *base;
>> > -};
>> > -
>> > -void dss_reg_w(struct dss_io_data *io, u32 offset, u32 value, u32 debug);
>> > -u32 dss_reg_r(struct dss_io_data *io, u32 offset, u32 debug);
>> > -void dss_reg_dump(void __iomem *base, u32 len, const char *prefix, u32 debug);
>> > -
>> > -#define DSS_REG_W_ND(io, offset, val)  dss_reg_w(io, offset, val, false)
>> > -#define DSS_REG_W(io, offset, val)     dss_reg_w(io, offset, val, true)
>> > -#define DSS_REG_R_ND(io, offset)       dss_reg_r(io, offset, false)
>> > -#define DSS_REG_R(io, offset)          dss_reg_r(io, offset, true)
>> > -
>> > -enum dss_vreg_type {
>> > -       DSS_REG_LDO,
>> > -       DSS_REG_VS,
>> > -};
>> > -
>> > -struct dss_vreg {
>> > -       struct regulator *vreg; /* vreg handle */
>> > -       char vreg_name[32];
>> > -       int min_voltage;
>> > -       int max_voltage;
>> > -       int enable_load;
>> > -       int disable_load;
>> > -       int pre_on_sleep;
>> > -       int post_on_sleep;
>> > -       int pre_off_sleep;
>> > -       int post_off_sleep;
>> > -};
>> > -
>> > -struct dss_gpio {
>> > -       unsigned int gpio;
>> > -       unsigned int value;
>> > -       char gpio_name[32];
>> > -};
>> > -
>> > -enum dss_clk_type {
>> > -       DSS_CLK_AHB, /* no set rate. rate controlled through rpm */
>> > -       DSS_CLK_PCLK,
>> > -       DSS_CLK_OTHER,
>> > -};
>> > -
>> > -struct dss_clk {
>> > -       struct clk *clk; /* clk handle */
>> > -       char clk_name[32];
>> > -       enum dss_clk_type type;
>> > -       unsigned long rate;
>> > -       unsigned long max_rate;
>> > -};
>> > -
>> > -struct dss_module_power {
>> > -       unsigned int num_vreg;
>> > -       struct dss_vreg *vreg_config;
>> > -       unsigned int num_gpio;
>> > -       struct dss_gpio *gpio_config;
>> > -       unsigned int num_clk;
>> > -       struct dss_clk *clk_config;
>> > -};
>> > -
>> > -int msm_dss_ioremap_byname(struct platform_device *pdev,
>> > -       struct dss_io_data *io_data, const char *name);
>> > -void msm_dss_iounmap(struct dss_io_data *io_data);
>> > -
>> > -int msm_dss_enable_gpio(struct dss_gpio *in_gpio, int num_gpio, int enable);
>> > -int msm_dss_gpio_enable(struct dss_gpio *in_gpio, int num_gpio, int enable);
>> > -
>> > -int msm_dss_config_vreg(struct device *dev, struct dss_vreg *in_vreg,
>> > -       int num_vreg, int config);
>> > -int msm_dss_enable_vreg(struct dss_vreg *in_vreg, int num_vreg,        int enable);
>> > -
>> > -int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk);
>> > -void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk);
>> > -int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk);
>> > -int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable);
>> > -int msm_dss_parse_clock(struct platform_device *pdev,
>> > -               struct dss_module_power *mp);
>> > -
>> > -int dpu_i2c_byte_read(struct i2c_client *client, uint8_t slave_addr,
>> > -                      uint8_t reg_offset, uint8_t *read_buf);
>> > -int dpu_i2c_byte_write(struct i2c_client *client, uint8_t slave_addr,
>> > -                       uint8_t reg_offset, uint8_t *value);
>> > -
>> > -#endif /* __DPU_IO_UTIL_H__ */
>> > --
>> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> > a Linux Foundation Collaborative Project
>> >


More information about the dri-devel mailing list