[DPU PATCH 11/11] drm/msm/dpu: move dpu_io_util to dpu folder
Rajesh Yadav
ryadav at codeaurora.org
Wed May 30 14:49:48 UTC 2018
dpu_io_util is used only by dpu driver so
move it to dpu folder.
Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
---
drivers/gpu/drm/msm/Makefile | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c | 186 ++++++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h | 61 +++++++++
drivers/gpu/drm/msm/dpu_io_util.c | 186 ----------------------------
drivers/gpu/drm/msm/dpu_io_util.h | 61 ---------
5 files changed, 248 insertions(+), 248 deletions(-)
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h
delete mode 100644 drivers/gpu/drm/msm/dpu_io_util.c
delete mode 100644 drivers/gpu/drm/msm/dpu_io_util.h
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index f4c5951..956c6c4 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -68,6 +68,7 @@ msm-y := \
disp/dpu1/dpu_hw_top.o \
disp/dpu1/dpu_hw_util.o \
disp/dpu1/dpu_hw_vbif.o \
+ disp/dpu1/dpu_io_util.o \
disp/dpu1/dpu_irq.o \
disp/dpu1/dpu_kms.o \
disp/dpu1/dpu_kms_utils.o \
@@ -77,7 +78,6 @@ msm-y := \
disp/dpu1/dpu_mdss.o \
disp/dpu1/dpu_power_handle.o \
dpu_dbg.o \
- dpu_io_util.o \
dpu_dbg_evtlog.o \
msm_atomic.o \
msm_debugfs.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c
new file mode 100644
index 0000000..f7caec3
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.c
@@ -0,0 +1,186 @@
+/* Copyright (c) 2012-2015, 2017-2018, The Linux Foundation.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include "dpu_io_util.h"
+
+void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk)
+{
+ int i;
+
+ for (i = num_clk - 1; i >= 0; i--) {
+ if (clk_arry[i].clk)
+ clk_put(clk_arry[i].clk);
+ clk_arry[i].clk = NULL;
+ }
+}
+
+int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk)
+{
+ int i, rc = 0;
+
+ for (i = 0; i < num_clk; i++) {
+ clk_arry[i].clk = clk_get(dev, clk_arry[i].clk_name);
+ rc = PTR_RET(clk_arry[i].clk);
+ if (rc) {
+ DEV_ERR("%pS->%s: '%s' get failed. rc=%d\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name, rc);
+ goto error;
+ }
+ }
+
+ return rc;
+
+error:
+ for (i--; i >= 0; i--) {
+ if (clk_arry[i].clk)
+ clk_put(clk_arry[i].clk);
+ clk_arry[i].clk = NULL;
+ }
+
+ return rc;
+}
+
+int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk)
+{
+ int i, rc = 0;
+
+ for (i = 0; i < num_clk; i++) {
+ if (clk_arry[i].clk) {
+ if (clk_arry[i].type != DSS_CLK_AHB) {
+ DEV_DBG("%pS->%s: '%s' rate %ld\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name,
+ clk_arry[i].rate);
+ rc = clk_set_rate(clk_arry[i].clk,
+ clk_arry[i].rate);
+ if (rc) {
+ DEV_ERR("%pS->%s: %s failed. rc=%d\n",
+ __builtin_return_address(0),
+ __func__,
+ clk_arry[i].clk_name, rc);
+ break;
+ }
+ }
+ } else {
+ DEV_ERR("%pS->%s: '%s' is not available\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name);
+ rc = -EPERM;
+ break;
+ }
+ }
+
+ return rc;
+}
+
+int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable)
+{
+ int i, rc = 0;
+
+ if (enable) {
+ for (i = 0; i < num_clk; i++) {
+ DEV_DBG("%pS->%s: enable '%s'\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name);
+ if (clk_arry[i].clk) {
+ rc = clk_prepare_enable(clk_arry[i].clk);
+ if (rc)
+ DEV_ERR("%pS->%s: %s en fail. rc=%d\n",
+ __builtin_return_address(0),
+ __func__,
+ clk_arry[i].clk_name, rc);
+ } else {
+ DEV_ERR("%pS->%s: '%s' is not available\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name);
+ rc = -EPERM;
+ }
+
+ if (rc) {
+ msm_dss_enable_clk(&clk_arry[i],
+ i, false);
+ break;
+ }
+ }
+ } else {
+ for (i = num_clk - 1; i >= 0; i--) {
+ DEV_DBG("%pS->%s: disable '%s'\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name);
+
+ if (clk_arry[i].clk)
+ clk_disable_unprepare(clk_arry[i].clk);
+ else
+ DEV_ERR("%pS->%s: '%s' is not available\n",
+ __builtin_return_address(0), __func__,
+ clk_arry[i].clk_name);
+ }
+ }
+
+ return rc;
+}
+
+int msm_dss_parse_clock(struct platform_device *pdev,
+ struct dss_module_power *mp)
+{
+ u32 i, rc = 0;
+ const char *clock_name;
+ u32 rate = 0;
+ int num_clk = 0;
+
+ if (!pdev || !mp)
+ return -EINVAL;
+
+ mp->num_clk = 0;
+ num_clk = of_property_count_strings(pdev->dev.of_node, "clock-names");
+ if (num_clk <= 0) {
+ pr_debug("clocks are not defined\n");
+ return 0;
+ }
+
+ mp->clk_config = devm_kzalloc(&pdev->dev,
+ sizeof(struct dss_clk) * num_clk,
+ GFP_KERNEL);
+ if (!mp->clk_config)
+ return -ENOMEM;
+
+ for (i = 0; i < num_clk; i++) {
+ rc = of_property_read_string_index(pdev->dev.of_node,
+ "clock-names", i,
+ &clock_name);
+ if (rc)
+ break;
+ strlcpy(mp->clk_config[i].clk_name, clock_name,
+ sizeof(mp->clk_config[i].clk_name));
+
+ mp->clk_config[i].type = DSS_CLK_AHB;
+ rc = of_property_read_u32_index(pdev->dev.of_node,
+ "clock-frequency", i,
+ &rate);
+ if (rc)
+ continue;
+ mp->clk_config[i].rate = rate;
+ if (rate)
+ mp->clk_config[i].type = DSS_CLK_PCLK;
+ }
+
+ if (!rc)
+ mp->num_clk = num_clk;
+
+ return rc;
+}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h
new file mode 100644
index 0000000..773b52e
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_io_util.h
@@ -0,0 +1,61 @@
+/* Copyright (c) 2012, 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DPU_IO_UTIL_H__
+#define __DPU_IO_UTIL_H__
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#ifdef DEBUG
+#define DEV_DBG(fmt, args...) pr_err(fmt, ##args)
+#else
+#define DEV_DBG(fmt, args...) pr_debug(fmt, ##args)
+#endif
+#define DEV_INFO(fmt, args...) pr_info(fmt, ##args)
+#define DEV_WARN(fmt, args...) pr_warn(fmt, ##args)
+#define DEV_ERR(fmt, args...) pr_err(fmt, ##args)
+
+struct dss_gpio {
+ unsigned int gpio;
+ unsigned int value;
+ char gpio_name[32];
+};
+
+enum dss_clk_type {
+ DSS_CLK_AHB, /* no set rate. rate controlled through rpm */
+ DSS_CLK_PCLK,
+};
+
+struct dss_clk {
+ struct clk *clk; /* clk handle */
+ char clk_name[32];
+ enum dss_clk_type type;
+ unsigned long rate;
+ unsigned long max_rate;
+};
+
+struct dss_module_power {
+ unsigned int num_gpio;
+ struct dss_gpio *gpio_config;
+ unsigned int num_clk;
+ struct dss_clk *clk_config;
+};
+
+int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk);
+void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk);
+int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk);
+int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable);
+int msm_dss_parse_clock(struct platform_device *pdev,
+ struct dss_module_power *mp);
+#endif /* __DPU_IO_UTIL_H__ */
diff --git a/drivers/gpu/drm/msm/dpu_io_util.c b/drivers/gpu/drm/msm/dpu_io_util.c
deleted file mode 100644
index f7caec3..0000000
--- a/drivers/gpu/drm/msm/dpu_io_util.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* Copyright (c) 2012-2015, 2017-2018, The Linux Foundation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-
-#include "dpu_io_util.h"
-
-void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk)
-{
- int i;
-
- for (i = num_clk - 1; i >= 0; i--) {
- if (clk_arry[i].clk)
- clk_put(clk_arry[i].clk);
- clk_arry[i].clk = NULL;
- }
-}
-
-int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk)
-{
- int i, rc = 0;
-
- for (i = 0; i < num_clk; i++) {
- clk_arry[i].clk = clk_get(dev, clk_arry[i].clk_name);
- rc = PTR_RET(clk_arry[i].clk);
- if (rc) {
- DEV_ERR("%pS->%s: '%s' get failed. rc=%d\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name, rc);
- goto error;
- }
- }
-
- return rc;
-
-error:
- for (i--; i >= 0; i--) {
- if (clk_arry[i].clk)
- clk_put(clk_arry[i].clk);
- clk_arry[i].clk = NULL;
- }
-
- return rc;
-}
-
-int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk)
-{
- int i, rc = 0;
-
- for (i = 0; i < num_clk; i++) {
- if (clk_arry[i].clk) {
- if (clk_arry[i].type != DSS_CLK_AHB) {
- DEV_DBG("%pS->%s: '%s' rate %ld\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name,
- clk_arry[i].rate);
- rc = clk_set_rate(clk_arry[i].clk,
- clk_arry[i].rate);
- if (rc) {
- DEV_ERR("%pS->%s: %s failed. rc=%d\n",
- __builtin_return_address(0),
- __func__,
- clk_arry[i].clk_name, rc);
- break;
- }
- }
- } else {
- DEV_ERR("%pS->%s: '%s' is not available\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name);
- rc = -EPERM;
- break;
- }
- }
-
- return rc;
-}
-
-int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable)
-{
- int i, rc = 0;
-
- if (enable) {
- for (i = 0; i < num_clk; i++) {
- DEV_DBG("%pS->%s: enable '%s'\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name);
- if (clk_arry[i].clk) {
- rc = clk_prepare_enable(clk_arry[i].clk);
- if (rc)
- DEV_ERR("%pS->%s: %s en fail. rc=%d\n",
- __builtin_return_address(0),
- __func__,
- clk_arry[i].clk_name, rc);
- } else {
- DEV_ERR("%pS->%s: '%s' is not available\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name);
- rc = -EPERM;
- }
-
- if (rc) {
- msm_dss_enable_clk(&clk_arry[i],
- i, false);
- break;
- }
- }
- } else {
- for (i = num_clk - 1; i >= 0; i--) {
- DEV_DBG("%pS->%s: disable '%s'\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name);
-
- if (clk_arry[i].clk)
- clk_disable_unprepare(clk_arry[i].clk);
- else
- DEV_ERR("%pS->%s: '%s' is not available\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name);
- }
- }
-
- return rc;
-}
-
-int msm_dss_parse_clock(struct platform_device *pdev,
- struct dss_module_power *mp)
-{
- u32 i, rc = 0;
- const char *clock_name;
- u32 rate = 0;
- int num_clk = 0;
-
- if (!pdev || !mp)
- return -EINVAL;
-
- mp->num_clk = 0;
- num_clk = of_property_count_strings(pdev->dev.of_node, "clock-names");
- if (num_clk <= 0) {
- pr_debug("clocks are not defined\n");
- return 0;
- }
-
- mp->clk_config = devm_kzalloc(&pdev->dev,
- sizeof(struct dss_clk) * num_clk,
- GFP_KERNEL);
- if (!mp->clk_config)
- return -ENOMEM;
-
- for (i = 0; i < num_clk; i++) {
- rc = of_property_read_string_index(pdev->dev.of_node,
- "clock-names", i,
- &clock_name);
- if (rc)
- break;
- strlcpy(mp->clk_config[i].clk_name, clock_name,
- sizeof(mp->clk_config[i].clk_name));
-
- mp->clk_config[i].type = DSS_CLK_AHB;
- rc = of_property_read_u32_index(pdev->dev.of_node,
- "clock-frequency", i,
- &rate);
- if (rc)
- continue;
- mp->clk_config[i].rate = rate;
- if (rate)
- mp->clk_config[i].type = DSS_CLK_PCLK;
- }
-
- if (!rc)
- mp->num_clk = num_clk;
-
- return rc;
-}
diff --git a/drivers/gpu/drm/msm/dpu_io_util.h b/drivers/gpu/drm/msm/dpu_io_util.h
deleted file mode 100644
index 773b52e..0000000
--- a/drivers/gpu/drm/msm/dpu_io_util.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (c) 2012, 2017-2018, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __DPU_IO_UTIL_H__
-#define __DPU_IO_UTIL_H__
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#ifdef DEBUG
-#define DEV_DBG(fmt, args...) pr_err(fmt, ##args)
-#else
-#define DEV_DBG(fmt, args...) pr_debug(fmt, ##args)
-#endif
-#define DEV_INFO(fmt, args...) pr_info(fmt, ##args)
-#define DEV_WARN(fmt, args...) pr_warn(fmt, ##args)
-#define DEV_ERR(fmt, args...) pr_err(fmt, ##args)
-
-struct dss_gpio {
- unsigned int gpio;
- unsigned int value;
- char gpio_name[32];
-};
-
-enum dss_clk_type {
- DSS_CLK_AHB, /* no set rate. rate controlled through rpm */
- DSS_CLK_PCLK,
-};
-
-struct dss_clk {
- struct clk *clk; /* clk handle */
- char clk_name[32];
- enum dss_clk_type type;
- unsigned long rate;
- unsigned long max_rate;
-};
-
-struct dss_module_power {
- unsigned int num_gpio;
- struct dss_gpio *gpio_config;
- unsigned int num_clk;
- struct dss_clk *clk_config;
-};
-
-int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk);
-void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk);
-int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk);
-int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable);
-int msm_dss_parse_clock(struct platform_device *pdev,
- struct dss_module_power *mp);
-#endif /* __DPU_IO_UTIL_H__ */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the dri-devel
mailing list