[PATCH] drm/amd/display: Fix misleading buffer information

[Shaokun Zhang]

RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.")
Cc: Charlene Liu <charlene.liu at amd.com>
Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin at amd.com>
Cc: Leo Li <sunpeng.li at amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun at hisilicon.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index fb04a4a..5da2186 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1722,7 +1722,7 @@ static void write_i2c_retimer_setting(
 		i2c_success = i2c_write(pipe_ctx, slave_address,
 				buffer, sizeof(buffer));
 		RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
-			offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
+			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
 			/* Write failure */
@@ -1734,7 +1734,7 @@ static void write_i2c_retimer_setting(
 		i2c_success = i2c_write(pipe_ctx, slave_address,
 				buffer, sizeof(buffer));
 		RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
-			offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
+			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
 			/* Write failure */
-- 
2.7.4