[PATCH v5 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable
Manasi Navare
manasi.d.navare at intel.com
Fri Oct 5 23:23:02 UTC 2018
Display Stream Splitter registers need to be programmed to enable
the joiner if two DSC engines are used and also to enable
the left and the right DSC engines. This happens as part of
the DSC enabling routine in the source in atomic commit.
v2:
* Rebase (Manasi)
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa at intelcom>
---
drivers/gpu/drm/i915/intel_vdsc.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
index f2b3b30b6f5e..d3001647a887 100644
--- a/drivers/gpu/drm/i915/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -1009,6 +1009,12 @@ static void intel_dp_send_dsc_pps_sdp(struct intel_encoder *encoder,
void intel_dsc_enable(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state)
{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ enum pipe pipe = crtc->pipe;
+ i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
+ u32 dss_ctl1_val = 0;
+ u32 dss_ctl2_val = 0;
if (!crtc_state->dsc_params.compression_enable)
return;
@@ -1017,5 +1023,21 @@ void intel_dsc_enable(struct intel_encoder *encoder,
intel_dp_send_dsc_pps_sdp(encoder, crtc_state);
+ /* Configure DSS_CTL registers for DSC */
+ if (encoder->type == INTEL_OUTPUT_EDP) {
+ dss_ctl1_reg = DSS_CTL1;
+ dss_ctl2_reg = DSS_CTL2;
+ } else {
+ dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
+ dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
+ }
+ dss_ctl2_val |= LEFT_BRANCH_VDSC_ENABLE;
+ if (crtc_state->dsc_params.dsc_split) {
+ dss_ctl2_val |= RIGHT_BRANCH_VDSC_ENABLE;
+ dss_ctl1_val |= JOINER_ENABLE;
+ }
+ I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
+ I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
+
return;
}
--
2.18.0
More information about the dri-devel
mailing list