[PATCH v5 23/28] drm/i915/icl: Add Display Stream Splitter control registers
Manasi Navare
manasi.d.navare at intel.com
Fri Oct 5 23:23:01 UTC 2018
From: "Srivatsa, Anusha" <anusha.srivatsa at intel.com>
Add defines for DSS_CTL registers.
These registers specify the big joiner, splitter,
overlap pixels and info regarding display stream
compression enabled on left or right branch.
v3 (From Manasi):
- Change the hex values to lower case (Madhav)
- Use BIT macro (Manasi)
v2:
- Add define to conditionally check the buffer target depth (James Ausmus)
Suggested-by: Madhav Chauhan <madhav.chauhan at intel.com>
Cc: Madhav Chauhan <madhav.chauhan at intel.com>
Cc: Manasi Navare <manasi.d.navare at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5b95369f9b8f..75606e3bd310 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7704,6 +7704,39 @@ enum {
#define RC_MAX_QP_SHIFT 5
#define RC_MIN_QP_SHIFT 0
+/* Display Stream Splitter Control */
+#define DSS_CTL1 _MMIO(0x67400)
+#define SPLITTER_ENABLE (1 << 31)
+#define JOINER_ENABLE (1 << 30)
+#define DUAL_LINK_MODE_INTERLEAVE (1 << 24)
+#define DUAL_LINK_MODE_FRONTBACK (0 << 24)
+#define OVERLAP_PIXELS_MASK (0xf << 16)
+#define OVERLAP_PIXELS(pixels) ((pixels) << 16)
+#define LEFT_DL_BUF_TARGET_DEPTH_MASK (0xfff << 0)
+#define LEFT_DL_BUF_TARGET_DEPTH(pixels) ((pixels) << 0)
+#define MAX_DL_BUFFER_TARGET_DEPTH 0x5a0
+
+#define DSS_CTL2 _MMIO(0x67404)
+#define LEFT_BRANCH_VDSC_ENABLE (1 << 31)
+#define RIGHT_BRANCH_VDSC_ENABLE (1 << 15)
+#define RIGHT_DL_BUF_TARGET_DEPTH_MASK (0xfff << 0)
+#define RIGHT_DL_BUF_TARGET_DEPTH(pixels) ((pixels) << 0)
+
+#define _ICL_PIPE_DSS_CTL1_PB 0x78200
+#define _ICL_PIPE_DSS_CTL1_PC 0x78400
+#define ICL_PIPE_DSS_CTL1(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
+ _ICL_PIPE_DSS_CTL1_PB, \
+ _ICL_PIPE_DSS_CTL1_PC)
+#define BIG_JOINER_ENABLE (1 << 29)
+#define MASTER_BIG_JOINER_ENABLE (1 << 28)
+#define VGA_CENTERING_ENABLE (1 << 27)
+
+#define _ICL_PIPE_DSS_CTL2_PB 0x78204
+#define _ICL_PIPE_DSS_CTL2_PC 0x78404
+#define ICL_PIPE_DSS_CTL2(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
+ _ICL_PIPE_DSS_CTL2_PB, \
+ _ICL_PIPE_DSS_CTL2_PC)
+
#define DSCA_RC_RANGE_PARAMETERS_1 _MMIO(0x6B248)
#define DSCA_RC_RANGE_PARAMETERS_1_UDW _MMIO(0x6B248 + 4)
#define DSCC_RC_RANGE_PARAMETERS_1 _MMIO(0x6BA48)
--
2.18.0
More information about the dri-devel
mailing list