[PATCH] drm/i2c/tda9950.c: set MAX_RETRIES for errors only

[Daniel Vetter]

On Thu, Sep 13, 2018 at 03:33:20PM +0200, Hans Verkuil wrote:
> On 09/13/18 15:16, Daniel Vetter wrote:
> > On Thu, Sep 13, 2018 at 10:33:35AM +0100, Russell King - ARM Linux wrote:
> >> Hi Hans,
> >>
> >> I'll pick it up in due course.
> >>
> >> Thanks.
> >>
> >> On Tue, Sep 11, 2018 at 08:41:59AM +0200, Hans Verkuil wrote:
> >>> Russell (or someone else), can you Ack this patch? I'd like to get this
> >>> for 4.20.
> >>>
> >>> Thanks!
> >>>
> >>> 	Hans
> >>>
> >>> On 08/27/2018 02:28 PM, Hans Verkuil wrote:
> >>>> The CEC_TX_STATUS_MAX_RETRIES should be set for errors only to
> >>>> prevent the CEC framework from retrying the transmit. If the
> >>>> transmit was successful, then don't set this flag.
> >>>>
> >>>> Found by running 'cec-compliance -A' on a beaglebone box.
> >>>>
> >>>> Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
> > 
> > Since the tda driver is now a brideg one, would make sense to maintain it
> > as part of drm-misc? Hans could push directly then.
> 
> It isn't yet part of drm-misc? It would make sense IMHO.

I think not formally, drm/i2c isn't one of the drm-misc areas. But it does
fall under "everything else" exception. And I'd be happy to ack a formal
MAINTAINERS patch (plus maybe even moving it from drm/i2c/ to
drm/bridge/).

> And 'due course' is too vague since this should be merged for 4.20.
> I plan to add BeagleBone Black support soon for 4.20 since the GPIO issues
> that blocked supporting that board are close to being resolved. And this
> should be fixed before enabling BBB support.
> 
> It's an annoying bug that trips up the cec-compliance adapter test.

Acked-by: Daniel Vetter <daniel.vetter at ffwll.ch> for stuffing right away
into drm-misc-next, if that helps.
-Daniel

> 
> Regards,
> 
> 	Hans
> 
> > -Daniel
> > 
> >>>> ---
> >>>>  drivers/gpu/drm/i2c/tda9950.c | 3 ++-
> >>>>  1 file changed, 2 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/i2c/tda9950.c b/drivers/gpu/drm/i2c/tda9950.c
> >>>> index 5d2f0d548469..4a14fc3b5011 100644
> >>>> --- a/drivers/gpu/drm/i2c/tda9950.c
> >>>> +++ b/drivers/gpu/drm/i2c/tda9950.c
> >>>> @@ -191,7 +191,8 @@ static irqreturn_t tda9950_irq(int irq, void *data)
> >>>>  			break;
> >>>>  		}
> >>>>  		/* TDA9950 executes all retries for us */
> >>>> -		tx_status |= CEC_TX_STATUS_MAX_RETRIES;
> >>>> +		if (tx_status != CEC_TX_STATUS_OK)
> >>>> +			tx_status |= CEC_TX_STATUS_MAX_RETRIES;
> >>>>  		cec_transmit_done(priv->adap, tx_status, arb_lost_cnt,
> >>>>  				  nack_cnt, 0, err_cnt);
> >>>>  		break;
> >>>>
> >>>
> >>
> >> -- 
> >> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> >> FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
> >> According to speedtest.net: 13Mbps down 490kbps up
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > 
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch